Tender For Construction Of Security Barak Including Other Allied Works At H-1 Gupkar Srinagar.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
3 days left
EMD
60000
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Security Barak Including Other Allied Works At H-1 Gupkar Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips valleys and gutters etc.,and stacking the material within 50 meters lead of :- G.S. Sheet |
| 2 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5meters height including stacking the material within 50 meters lead : of sectional area 40 sqcm. and above. |
| 3 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 meters lead :-above 25 to 40 mm thick |
| 4 | Demolishing Mud brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material with in 50 meters lead as per direction of Engineer-in-charge:- In mud mortar |
| 5 | Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead 50M from edge of cutting.All kinds of soil. |
| 6 | Supplying and laying of dry stone soling hand packed tightly including ramming, watering and carriages complete. |
| 7 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering. All work up to all levels. 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) Crushed |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering.All work upto plinth level with: 1 : 1½ : 3 (1 cement : 1½coarse sand : 3graded stone aggregate 20mm nominal size) |
| 9 | Reinforced cement concrete workin beams, suspended floors, roofs havingslope upto15°, landings, balconies, shelves, chajjas,lintels, bands, plain windowsills, staircasesandspiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with --- 1:1½:3 (1cement: 1½coarses and: 3graded stone aggregate 20mm nominal size |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggre gate 20 mm nominal size) |
| 11 | Supplying and filling in plinth with stone dust under floors i/c watering and compacting,consolidation and carriage of materials upto site all complete. |
| 12 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 14 | Foundations, footings, bases of columns etc. for mass concrete. |
| 15 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 16 | Brick work with FPS bricks of class designation 75 in super structure above plinth level up to floor V level. In cement mortar 1cement: 6 fine sand mortar. |
| 17 | 15 mm cement plaster finished with a floating coat of neat cement of mix 1:6 (1 cement : 6 fine sand) |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixedin position with hold fast lugs orwith dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 19 | Providing hoisting and fixing trusses/purlins/rafters/ posts/post plates or like components including cost ofscrews etc. complete: FirstclassBudloo/Firwood |
| 20 | Labour for fixing trusses/purlins/rafters/ posts/post plates or like components including cost ofscrews etc. complete: available Qty |
| 21 | Providing and fixing 0.5mm thick pre-color coated high rib sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 22 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.:- 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 23 | Providing & fixing plained eaves boarding 250x32mm (nominal size) in First Class KD wood including cost of applying priming coat and Two or more coats of synthetic enamel paint complete. |
| 24 | Providing and fixing of plywood in walls, ceiling or like of approved brand and manufacture with all necessary fittings and fixtures, scoldings all complete as specified and as directed by the Engineer-in-Charge including all carriages complete as specified and as directed by the Engineer-in Charge.12mm |
| 25 | Providing and fixing of wooden moulded cornice of required size (base and height) of traingular shape to the junction of panelling etc with iron screws, plugs and priming coat on unexposed surface etc complete. KD wood. |
| 26 | Providing and fixing 35 mm thick paneled door shutters, including ISI marked black enameled M.S.butt hinges with necessary screws including paneling of 12mm thick decorative Nova pan Particle board both sides laminatedas per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) First. Class K.D/Silver wood. |
| 27 | Providing and fixing glazed shutters for doors, windows and clerestory windows of using 4mm thick float glass panes including ISI marked M.S. pressed butt shutters in hinges bright finished of required size with necessary screws. including primer coat (imported kail wood 35 mm |
| 28 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Imported KD wood 35 mm thick |
| 29 | Providing and fixing glass panes with wooden fittings of required size wherever necessary glass panes 3.5mm thick weighing 8.75Kg/ Sqm |
| 30 | Providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08% and conformingtoIS:15622 of approved make,in all colours and shades, laid on 20mm thick cement mortar 1:4 1 cement :4 coarse sand including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600 x 600mm. |
| 31 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 2mm thick |
| 32 | Finishing walls with acrylic smooth exterior paint of required shade on New work Two or more coats applied 1.67liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 33 | Providing and fixing of imported wooden panelling lining on walls, ceilings tongued and grooved planks including cost of ground work of 12mm to10mm (as per requirement) thick ply 50mm wide 600mmX600mm center to center harizontally and vertically fixing with rawl plugs and screws and cover mouldings but including cost ofnails, screws and scafolding etc. including cost of two coats of touch wood and 50mm wide wooden cornice etc. complete (12mm thick) |
| 34 | Providing 40x5mm flat iron holdfast 40cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an evens shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 36 | Chequerred precast cement concrete tiles 22mm thick in foot path and courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing ,cleaning and curing complete ,on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand). Light shade using white cement |
| 37 | Providing and laying Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper thearchitectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement :4coarsesand) laid and jointedwith cement slurryand pointingwith white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc.all completeas specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown,Cat Eye or equivalent. |
| 38 | Providing edge moulding to 18mm/16mm thick marble stone counters, Vanities etc. Including machine polishing to edge to give highg loss finish etc. complete as per design approved by Engineerin-Charge. GraniteWork |
| 39 | Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) RC.C. top slab with 1:1 ½: 3 mix (1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line |
| 40 | Kota stone slab flooring 25mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4(1cement : 4 coarse sand) : |
| 41 | Providing and fixing of Aluminium Foil Bubble Insulation Sheet, Thickness 12mm Neo Insulation Material is made of Single or Double layers of polyethylene industrialized air bubbles bonded between two layers of highly reflective pure aluminium foil film.• Industrialized strength, light weight yet durable insulation designed to hold staples without tearing.• Does not compress, collapse or disintegrate.Reflects 97% of radiant heat,emits less than 3% of heat,Class 1/ Class A fire rated radiant barrier that has passed the ASTME 84 test & ASTME 2599 .•Non-toxic, non-carcinogenic, fibre-free, safe to handle and does not require protective clothing or respirators to install including 50x40mm wooden frame work. |
| 42 | Labour for fixing available sheets for back side fencing over chain link fencing incl . Cnuts bolts complete |
| 43 | Carriage of material by MT from source to site |
| 44 | Sand / Bajri for an avg lead of 15 Km by MT and 100 mtrs by head load. |
| 45 | Bricks for an avg lead of 20 Km by MT and 100 mtrs by head load. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender