Tender For Road Safety Work At Hpda Office Rotary On Delhi Bareilly Lucknow Road -Hapur City Portion-Odr-
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Oct 2026
4 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hapur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work At Hpda Office Rotary On Delhi Bareilly Lucknow Road -Hapur City Portion-Odr-
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with bitumen emulsion using Bitumen pressure distributor @ 0.20 kg/sqm on the prepared bituminous surface cleaned with mechanical broom as per MoRT&H specifications clause 503.Including cost of, all material, Bitumen, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 2 | Providing and laying dense graded bituminous macadam with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects as per MoRT&H specifications clause 505.Including cost of, all material, Bitumen, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 3 | Providing and laying bituminous concrete Grading 2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects as per MoRT&H specifications clause 507.Including cost of, all material, Bitumen, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. MORT&H -803 (8.13) .Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 5 | Providing and laying of repeatitive bars of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes.MORT&H -803 (8.13) Base Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 6 | Supply & fixing of Linear Delineator System (LDS) panels made of Micro Prismatic Retro Reflective sheeting type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide Retro Reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing concrete/ brick work with 16 Nos fastner/ screw.IRC:79-2019 Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 7 | Supply and fixing of raised pavement marker with Made of Plastic body of RPM /Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High- Impact Polystyrene) or Acrylonitrile Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecrylate conforming to ASTM D788 or equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm. The marker height shall not be less than 10mm and shall not exceed 20mm & Width shall not exceed 130mm. The base of the marker shall be flat within 1.3mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. In addition, a two year warranty for satisfactory in field performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged, get worn out or lose their reflectivity compared to stipulated standards, the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. RPM (without shank) MORT&H 804(8.33) Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 8 | Solar Power road marker (Solar Studs) The solar studs shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistantand strong enough to support a load of 13,635 kg tested in accordance with ASTMD 4280. Its colour may be white, red,yellow,green or blue or combination as directed by the Engineer . Its water resistance shall meet there quirements of IP65 in accordance with IS:12063:1987category 2 for protection against water ingress.The dimensions of solar studs shall not be less than100mmX100mm X10mm. It shall have super bright LED ssoas to provide long visibility from a distance of more than 800m. Its flashingrate shall not be less than1Hz . Its should be able to give the prescribed performance in the temperrature range of-400C to+550C. Its life shall be not less than 3 Years.The rate shall include all materials, labour,equipments, fabrication, transportation,erection, installation and incidentals all completeasper directionof theEngineer-in Charge.MORT&H 804.6 (8.35) - Suggestive Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 9 | Supply, Fixing & amp; eraction of built up Cantilever Structure 6.0m span comprising of one vertical posts of 6.00M height made up of 300mm NB heavy class MS pipe as vertical member welded with 10mm 6.0m span over heavy cantilever structure with 300 dia MS one vertical post MS plate at top & 12mm MS plate at bottom. The horizontal Truss shall comprise of 50mm dia heavy class M.S. pipe and 40mm dia heavy MS pipe as bracing & 10mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel paint. The work includes construction of RCC Foundation of size 0.90 x 0.90 x 1.50m of required depth as per site condition for built up structure including earth work in excavation 100mm thick Lean Concrete in 1:3:6 (cement coarse sand and 40mm gauge stone ballast and RCC M-25 grade Concrete including supply and fixing of 25mm dia Foundation Bolts 600mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67-2012 complete in all respect. The Rates shall include cost of design, fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge. MORT&H 802. Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 10 | Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminum skin aliminium composite panel face to be fully covered with high intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legends. letters, numerals and borders etc should be as per MoRT&H specification no-801.3.7. The sheeting shall have a pressure - sensitive adhesive of the aggressive - back type requiring no heat, solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the bsheeting manufacturer. The ACM (Aluminium Composite Material) shall be fixed on the back frame MS angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. MORT&H 801.Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 11 | P/F of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with PCC M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection day time colour and liminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 year outdoor weathering and its having passed these tests shall be obtained from international / government, laboratory / institute by manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition whithin 3 years of launching of product by the manufacturer in abroad, alternatively, a certificate confirming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the employer / client, if sodesires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per as per IRC67-2012. Legends, letters, numerals and borders etc should be as per MoRT&H specification no. 801.3.7 P xi). 90 cm equilateral triangle with deffinition plate (20cmx60cm) Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 12 | P/F of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with PCC M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection day time colour and liminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 year outdoor weathering and its having passed these tests shall be obtained from international / government, laboratory / institute by manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition whithin 3 years of launching of product by the manufacturer in abroad, alternatively, a certificate confirming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the employer / client, if sodesires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per as per IRC67-2012. Legends, letters, numerals and borders etc should be as per MoRT&H specification no. 801.3.7 P xi) 30 mm x 90 mm rectangular with deffinition plate (20cmx60cm) Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 13 | P/F of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with PCC M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection day time colour and liminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 year outdoor weathering and its having passed these tests shall be obtained from international / government, laboratory / institute by manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition whithin 3 years of launching of product by the manufacturer in abroad, alternatively, a certificate confirming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the employer / client, if sodesires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per as per IRC67-2012. Legends, letters, numerals and borders etc should be as per MoRT&H specification no. 801.3.7 P xi) 80 cm x 60 cm rectangular with deffinition plate (20cmx60cm) Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 14 | P/F of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with PCC M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection day time colour and liminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 year outdoor weathering and its having passed these tests shall be obtained from international / government, laboratory / institute by manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition whithin 3 years of launching of product by the manufacturer in abroad, alternatively, a certificate confirming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the employer / client, if sodesires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per as per IRC67-2012. Legends, letters, numerals and borders etc should be as per MoRT&H specification no. 801.3.7 P xi) 90 cm high octagon Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 15 | P/F of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with PCC M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection day time colour and liminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 year outdoor weathering and its having passed these tests shall be obtained from international / government, laboratory / institute by manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition whithin 3 years of launching of product by the manufacturer in abroad, alternatively, a certificate confirming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the employer / client, if sodesires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per as per IRC67-2012. Legends, letters, numerals and borders etc should be as per MoRT&H specification no. 801.3.7 P xi) 60 cm Circular with deffinition plate (20cmx60cm) Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 16 | P/E direction and place identification retro-reflectorised sign with size more than 0.90 sqm size Board as per IRC:67-2012 made of high intensity grade sheeting. The retro reflective shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection day time colour and liminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 year outdoor weathering and its having passed these tests shall be obtained from international / government, laboratory / institute by manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition whithin 3 years of launching of product by the manufacturer in abroad, alternatively, a certificate confirming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the employer / client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per as per IRC67-2012. Legends, letters, numerals and borders etc should be as per MoRT&H specification no. 801.3.7. Sheet fixed over aluminium sheeting 2 mm thick with area exceeding 0.90 sqm. supported on a mild steel single angle iron post 65x75x6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45x45x60 cm, below ground level as per approved drawing complete. (92 cm x 162 cm rectangular)MORT&H 801(8.5) Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. with approved quality material of Berger/J.K./ Birla or similar. DSR 2023.13.80 Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work required for proper completion of work paint to be used should confirem the ISI No. 103-1950 . DSR 2023.13.99.1 Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 19 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender