Tender For Road Safety Work On Differents Road Under A.E.-Vth
Tender Value
2.60 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
4 days left
EMD
26000
Bank guarantee accepted
Document Fee
589
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rampur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work On Differents Road Under A.E.-Vth
BOQ
| Sl. No. | Item Description |
| 1 | Provision of Trapezoidal hump/Table Top For Desirable speed ( For VR, ODR and above) at approved locations to control speed, marked with white strips of road marking paint.(7 mtr wide road) Including all Taxes T&P Labour etc. complete but excluding GST. |
| 2 | Provision of Trapezoidal hump/Table Top For Desirable speed ( For VR, ODR and above) at approved locations to control speed, marked with white strips of road marking paint.(5.5 mtr wide road) Including all Taxes T&P Labour etc. complete but excluding GST. |
| 3 | Provision of Trapezoidal hump/Table Top For Desirable speed ( For VR, ODR and above) at approved locations to control speed, marked with white strips of road marking paint.(3.75 mtr wide road) Including all Taxes T&P Labour etc. complete but excluding GST. |
| 4 | Provision of Trapezoidal hump/Table Top For Desirable speed ( For VR, ODR and above) at approved locations to control speed, marked with white strips of road marking paint.(3.0 mtr wide road) Including all Taxes T&P Labour etc. complete but excluding GST. |
| 5 | Supply and Fixing of moulded shank cats eyes moulded shank raised pavement marker made of polycarbonate moulded body and reflected panels with micro parismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD 4280 type H and complaying to specification of categories a of MORTH CIRCULAR NO RW/NH/33023/10-97 DO III DT 11-06-1997. The height width and length shall not exceed 20 mm 150 mm & with minimum reflective area of 13 sqcm. and the each side, slope to the base shall be 35 degree. Fixing will be without nails but using twin polymer shanks using bitumen adhesive on bitumen road as per manufacturs recommnendation including site clearance etc and complete as per direction by rengineer in charge. Rates are included all tax & GST. (Sollar Studs or yellow cats eyes to way AND Red & white two way cats eyes) (All complete as per E/I) |
| 6 | Road Delinator Providing and fixing of Standard Metal Delineator as per IRC 79-2019 consisting of minimum retro reflective unit exposed area of 330 square cm in white color, full cube comer micro prismalic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification The delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. ....... |
| 7 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (TRAFFIC SIGNS - (All complete as per E/I) Including all item T&P, Labour, Material, Royalty Tax but excluding GST |
| 8 | Double side CHEVRON Sign Board |
| 9 | Stop Sign on Minor Road at intersection of size 90 cm hight octagonal |
| 10 | Direction Board on Minor Road at intersection of size 90 cm hight @0.95 sqm f Rectangular Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender