Tender For Repair And Restoration Of The Arulmigu Kulasekaraperumal Temple @ Kallidaikuruchi, Ambasamudram Taluk In Tirunelveli District.
Tender Value
3.70 Crore
Estimated cost
Bid Submission
20 Nov 2026
25 days left
EMD
1.95 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Restoration Of The Arulmigu Kulasekaraperumal Temple @ Kallidaikuruchi, Ambasamudram Taluk In Tirunelveli District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the existing laid weathering course Lime concrete including clearing away from the site etc complete |
| 2 | Dismantling the existing Brick work in Lime Mortar including clearing away from the site etc complete. |
| 3 | Labour charges for removing the Existing cutstone flooring including numbering , wire charges , tools and plants, scaffolding for working in heights etc complete. |
| 4 | a) For Chitranvanam, Padma Jagati, Kandam, Uthira vari, Kabothagam, Viyalam, Ull Vari, Pavukkal, Flooring, Nilaikal etc complete. |
| 5 | b) For Thani Thun , Uthiram & Bothiyal etc complete. |
| 6 | a) For Flooring |
| 7 | Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except to rock requiring blasting but including shoring strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well consolidated and depositing the surplus earth within the compound with an initial lead of 10 metres and lift of 2 metres in places as shown by the departmental officers and clearing levelling the site etc complete complying with standard specification. |
| 8 | Cement concrete 1:5:10 (one cement five sand and Ten aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing, laying, compacting, curing, dewatering, side shuttering, wherever necessary including curing etc.,complete complying with standard specification. |
| 9 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)For Raft slab & Plinth Beam |
| 10 | Providing and laying in position, Standarzised Concrete Mix M-20 Grade in accordance with IS:456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimumcement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser /super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mmmachine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jellyand with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricatingcharges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing,curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary withoutclaiming extra, etc., complete complying with standard specification and as directed by the departmentalofficers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials). For Upto Basement |
| 11 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 12 | Random Rubble Masonry in Cement mortar 1:5 [one Cement and Five sand] using new hard granite stones including providing new bond stones wherever necessary including simultaneous flush pointing of the exposed surface above ground level with the same mortar and all incidential charges such as scaffolding, finishing and curing as directed by the departmental officers etc., complete complying with the standard specification. |
| 13 | Brick work using Country bricks in Cement Mortar 1:5 (one cement and Five sand) 8 3/4\\" x 4 1/4\\" x 2 3/4\\" including cost and conveyance of all materials and all labour charges including curing working in height etc complete. |
| 14 | Plastering with CM1:5 (one Cement and Five sand) 12mm thick including scaffolding finishing curing etc., complete complying with standard specification and as directed. |
| 15 | Supplying and filling in Foundation and basement with M-sand in layers not exceeding 150mm well watered rammed and consolidated including watering etc., complete complying with standard specification. |
| 16 | Providing New Cutstone flooring using cut stone slab 600 x 600 mm and not less than 100mm thick top Single line dressed and pointing with Lime mortar 1:1.5 etc complete |
| 17 | Supplying and filling in foundation, basement, etc with 10-12mm metal in layers of not more than 15cm thick well watered, rammed and consolidated |
| 18 | Supplying and filling in foundation and basement with well gravel in layer not exceeding 150 mm well water rammed and consolidated including watering etc, complete complying with standarad specification. |
| 19 | Supplying and paving of 83mm thick high strength type of interlocking Rubber moulded hydraulically pressed paver block of approved colour etc., complete. |
| 20 | Labour charges for Refixing the Existing cutstone Members including numbering , wire charges , tools and plants, scaffolding for working in heights etc complete. |
| 21 | a) For Chitranvanam, Padma Jagati, Kandam, Uthira vari, Kabothagam, Viyalam, Ull Vari, Pavukkal, Flooring, Nilaikal etc complete. |
| 22 | b) For Flooring |
| 23 | Supply of cut stone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil and other Temple Structures following length including cost and conveyance of Cut stone, labour charges for loading , unloading and all other incidental charges etc complete.(Unique Code: M-2277) |
| 24 | Labour charges for Palamunai Dressing and Refixing the following cutstone members etc as directed and fixing the same in position with Lime mortar including all labour charges for dressing and fixing in posision as directed etc complete |
| 25 | a) Vyalavari |
| 26 | b) Kabothagam |
| 27 | c) Pavukal |
| 28 | d) Uthiravari |
| 29 | e) Wall. |
| 30 | f) For Nillai Kaal |
| 31 | g) Thani Uthiram |
| 32 | h) Bothiyal |
| 33 | Scaffolding charges for Vimanans and gopurams with casurina posts coconut of palm trees whereever necessary for main, form work and providing with coonut keeth coverings, providing ladder arrangements, country wood plant for working, inspection etc., complete. |
| 34 | a) Upto 15' height |
| 35 | b) Upto 25' height |
| 36 | Ornamental Brick masonry Lime mortar 1:2 using Stock bricks including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for vimanam / gopuram |
| 37 | a) Upto 15'00\\" Height |
| 38 | b) Upto 25'00\\" Height |
| 39 | Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime mortar 1:1.5 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Combination Mortor1:1:4and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for Thirumathil |
| 40 | a) Upto 15' height |
| 41 | b) Upto 25' height |
| 42 | Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime, the proportion of brick jelly to lime being 32 to 12 ½ (No sand to be added) by volume and laid over the RCC roof slab in a single layer and consolidated to the finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime jaggery water etc. complete complying with standard specification. |
| 43 | Brick work using Country bricks in Lime Mortar 1:2 (one Lime and Two M-Sand) 8 3/4\\" x 4 1/4\\" x2 3/4\\" including cost and conveyance of all materials and all labour charges including curing working in height etc complete. |
| 44 | Finishing the top of roof with one course of New machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Lime Mortar 1:1.5 (One Cement and One and Half Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by thedepartmental officers |
| 45 | Painting with multicolour (Panchavarnam) good water based exterior emulson paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area. |
| 46 | a) Upto 15' height |
| 47 | b) Upto 25' height. |
| 48 | Supplying & fixing Teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with std. Specifications |
| 49 | a) Upto 7'00\\" Height |
| 50 | b) Above 7'00\\" Height |
| 51 | Polishing the teak wood members with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.) |
| 52 | Restoration by providing water wash and appropriate methodology to restore the originalities of the existing Cutstone structures inclusive of necessary scaffolding charges, conveyance and all hire charges for all tools and plants and clearing the site after completion of work etc, complete |
| 53 | Pointing with Lime mortar 1:1.5 (One lime and One and Half sand ) including cost and conveyance of all materials and all labour charges etc complete complying with standard specification. |
| 54 | Painting two coats with approved quality of water based exterior emulsion paint including one coat of priming coat in cement plastered wall surfaces in all floor including cost of all materials brushess, etc., scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers. |
| 55 | Supply and fixing of 50mm x 50mm Teakwood reeper on wall with necessary clamps and screws rigidly in the gap of the stone wall (Data - 1). |
| 56 | Supply and fixing run of 50mm X 50mm UPVC casing capping cable trunking box with necessary clamps and screws rigidly on the existing TW Reeper (Data - 2). |
| 57 | Supply and fixing of single box type 4'20W LED fitting with LED 20 W tube (higher end) complete with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (SD-443) |
| 58 | Supply and fixing of flood light 100W LED fitting with necessary wall grouting clamps with fixing bolts on the ceiling with PVC unsheathed copper leads from terminal to the fitting (Data - 4). |
| 59 | Supply and fixing of 9W LED Bulb for BH point (SD 79 - less cost of fancy glass shade). |
| 60 | Supply and fixing of 65mm (2.5\\") dia G.I pipe (class B) of 6mts length with 300mm x 300mm x 6mm MS plate duly welded at the bottom with cone roofing and construction of masonry pedestal and fixing of PVC synthetic fibre box of 8 nos (8\\" x 6\\") to house 6A SP MCB (Legrand make), control switch with 1 no 48W LED - street light fitting with LED (higher end) complete on the GI post with 1.5 Sqmm PVC unsheathed copper leads with painting of suitable colour (SD 465). |
| 61 | Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no. 32 mm GI bend complete on the existing post/on wall with PVC unsheathed copper leads with MS clamps and with painting (SD - 457). |
| 62 | Supply and fixing of 450mm 18\\" wall fan with stainless steel bracket on wall with connection (Data-5). |
| 63 | Supply and fixing of 8 module surface mounting box with combined cover plate plastic fixed with 6 Nos 6A 1 way switch and 1 no 6A Universal Plug with connections (Data-6). |
| 64 | Supply and fixing of 12 module surface mounting box with combined cover plate plastic fixed with 8 nos 6A 1 way switch and 2 nos 6A Universal Plug with connections (Data-7). |
| 65 | Supply and fixing of 1 no. 6A two module 5 pin socket, 1 no. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End (SD-374). |
| 66 | Supply and fixing of 1 no. 6/16A two module socket, 1 no. 16A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End (SD-398). |
| 67 | Supply and fixing of 450mm (18\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall (SD-118). |
| 68 | Supply and fixing of louvers shutters arrangements for 450mm (18\\") sweep (light duty) AC exhaust fan (Data-8). |
| 69 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD-520). |
| 70 | Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (Metal) with 1 No. 63A 4P MCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD-566). |
| 71 | Supply and fixing of 20A DP MCB switch in suitable pole sheet steel enclosure with earth connection on wall (Data-9). |
| 72 | supply and Run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in the existing UPVSC casing capping pipe on wall and ceiling with painting of suitable colour (Data-10). |
| 73 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in the existing UPVSC casing capping pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour (Data-11). |
| 74 | Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour (SD-58). |
| 75 | Supply and Laying of 2 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good (Data-12). |
| 76 | Supply and clamping of 2 x 16 sq.mm. PVC armoured LTUG cable on post or on wall with MS clamp (SD-200). |
| 77 | Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection (SD-161). |
| 78 | Supply and clamping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD-206). |
| 79 | Supply and fixing of 63A Three Phase 500V 4 pole Change Over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only (SD-656). |
| 80 | Supply and fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only (SD-640). |
| 81 | Supply and fixing of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1 no 63Amps 30 MA 4 pole RCD/RCB (higher end) with suitable connection link earth connection complete (SD-131). |
| 82 | Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection (SD-165). |
| 83 | Supply and fixing of 8\\" x 6\\" PVC synthetic box with 4 way connector for cable connection (Data-13).. |
| 84 | Supply and fixing of 65mm (2-1/2\\") dia GI Pipe (class-B) of 6 mts length with 300mm x 300mm x 6mm base plate duly welded at the bottom with concreting with construction of masonry pedestal with necessary clamps to hold the LTUG Aluminium Service Cable with painting of suitable colour (Data-14). |
| 85 | Supply and Run of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD-372). |
| 86 | Earthing as per the ISI Specification with an earth electrode of 2.10 metre Class 'B' GI pipe not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD-221). |
| 87 | Sub total |
| 88 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender