Tender For Repair & Renovation Of Tourism Development Office At Mayurbhanj In Mayurbhanj District.
Tender Value
21.97 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
4 days left
EMD
21970
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of Tourism Development Office At Mayurbhanj In Mayurbhanj District.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Dismantalling & Removing Doors ,Windows & Ventilators Including Frames,Hinges etc.as per the direction of Engineer-in-charge. |
| 3 | Ground Floor |
| 4 | First Floor |
| 5 | Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead |
| 6 | Ground Floor |
| 7 | First Floor |
| 8 | Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 9 | Ground Floor |
| 10 | First Floor |
| 11 | Dismantling and removing 2.5cm thick grading concrete from roof slab, cleaning the surface, lowering and removing the debris within 50m lead. |
| 12 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 13 | Ground Floor |
| 14 | First Floor |
| 15 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 16 | Ground Floor |
| 17 | First Floor |
| 18 | Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 19 | Providing scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge. |
| 20 | Ground Floor |
| 21 | First Floor |
| 22 | Providing fitting, laying and fixing of vitrified tile flooring using Colour printed tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 1200mmx600mm special plane / printed series of approved quality of Matt digital with slip shield Grande Matika Beige Light SS of Somany or equivalent having base price of the tile Rs. 80 -90 / sqft in all floors on 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge. |
| 23 | Ground Floor |
| 24 | First Floor |
| 25 | Providing Granite stone prepolished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 26 | Providing fitting, laying and fixing of vitrified tile flooring using Colour printed tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 600mmx600mm special plane / printed series of approved quality of Matt digital Moroccan Tiznit Bianco of Somany or equivalent having base price of the tile Rs. 80 -90 / sqft in all floors on 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in- Charge. |
| 27 | Ground Floor |
| 28 | First Floor |
| 29 | Providing 1200mmx600mm size special plain/printed series edge cut vitrified wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm of approved quality of Digital FP Grande Favara Crema FP of Somany or equivalent having base price of the tile Rs. 80 -90 / sqft in all floor approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in- charge |
| 30 | Ground Floor |
| 31 | First Floor |
| 32 | Supplying fitting and fixing in position Flush door using 32mm thick BWR Block Board of approved quality of Green / Mayur / Aeon or equivalent with providing 1mm sun mica (Royal touch) both sides of approved quality and as per drawing & design with all necessary brass fittings, door closer (Godrej, heavy duty) motrice lock (Godrej heavy duty), handle, door stopper etc including all required hardware with cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer –in-charge. |
| 33 | Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), for foundation & plinth with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 34 | Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), for superstructure with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 35 | Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 36 | Ground Floor |
| 37 | First Floor |
| 38 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge. |
| 39 | Ground Floor |
| 40 | First Floor |
| 41 | Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, ,es of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 42 | Ground Floor |
| 43 | First Floor |
| 44 | Providing & laying Plain Cement concrete (PCC ) of proportion (1:2:4) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect. |
| 45 | Finishing wall surface with acrylic wall putty (water based) of approved make and finished smooth on even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes with labour etc. complete as per direction of Engineer-in-charge. |
| 46 | Ground Floor |
| 47 | First Floor |
| 48 | Providing and applying 2 coats of plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free for foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, taxes, royalties, csaffolding, charge, (colour & shade to be approved before procurment & use) |
| 49 | Ground Floor |
| 50 | First Floor |
| 51 | Wall painting two coats with Weather coat paint exterior grade of approved make & approved shade over a coat of primer to make an even finished surface of walls of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastred surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T & P etc as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) |
| 52 | Ground Floor |
| 53 | First Floor |
| 54 | Painting two coat with approved synthetic enamel paint to new iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 55 | Ground Floor |
| 56 | First Floor |
| 57 | Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. |
| 58 | First Floor |
| 59 | Providing & fixing wooden door panelling with 12mm waterproof Ply (Mayur/Century/Green or equivalent) & 1mm thick laminate (Mayur/Century/Green or equivalent) of approved shade as per drawing and architecs instructions. complete |
| 60 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) core of block board with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete |
| 61 | Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures. complete.As per instruction of EIC(Rate as per SOR-2022) |
| 62 | Providing, fitting, fixing up false ceiling of approved design and drawing in all floors with G.I Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2’-0”x2’-0” to be suspended from ceiling by using 12.5mm thick Gypsum Board including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge |
| 63 | FURNITURE |
| 64 | Supplying and placing in position Main Table & ERU of the following specifications. Its size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. ERU size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. ( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 65 | Office Table1200 x 600 x 750Supplying and placing in position office Table of the following specifications. Its size shall be 1200 x 600 x 750.TABLE MATERIAL - The Table Panels are made from 18 ±0.5mm thk Pre- LaminatedExterior grade PLT ( Grade I,Type-II )(IS 12823) with PVC edgebanding on all sides.Drawer bottom panels are made up of 9mm thick (±1mm)Pre- laminated Particle Board.Locking has been provided on top drawer only.CONSTRUCTION - Table has provision of CPU monitor, Drawer and Sliding KBPT.The Table has a knock-down construction. ( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 66 | Providing, supplying and placing for Conference Full Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA methoddescribed in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.*HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H)*FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H)*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression.· Armrest top is mounted on Armrest structure made of glass filled Nylon.· Armrest Top is PU moulded over glass filled Nylon insert.ARMRESTS (THRILL Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features :· Up-Down adjustment–7 steps (7.0 ± 0.5cm range)· It has to & fro movement along with Swivel adjustment.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:· 360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustmentPNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment strok of 9.5 ± 0.3 cmPEDESTAL ASSEMBLY (THRILL EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors).TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.WIDTH (W): 77.0 CM. WIDTH (W): 76.1 CM.DEPTH (D): 76.1 CM.HEIGHT (H): 101.5-111.5 CM.SEAT HEIGHT (SH): 46.0-56.0 CM..( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 67 | Providing, supplying and placing of Mid Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam.SEAT SIZE: 51.8cm (W) x 49.7cm (D) BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm.BACK SIZE: 47.9 cm(W) x 66.9 cm (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25% compression.ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtopACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features360° revolving type Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfortTill tension adjustment can be operated in seating position5 position Tilt limiter giving option of variable sit angle to the chairSeat/back tilting ratio of 1:2 The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron)PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm.PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors).TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter.WIDTH (W) - 76.0cmDEPTH (D) - 76.0cmHEIGHT (H) - 95.5 cm- 105.5cmSEAT HEIGHT - 43.5 - 54.0cm.( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 68 | Providing, supplying and placing for Conference High Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA methoddescribed in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.*HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H)*FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H)*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression.· Armrest top is mounted on Armrest structure made of glass filled Nylon.· Armrest Top is PU moulded over glass filled Nylon insert.ARMRESTS (THRILL Exaecutive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features :· Up-Down adjustment–7 steps (7.0 ± 0.5cm range)· It has to & fro movement along with Swivel adjustment.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:· 360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustmentPNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment strok of 9.5 ± 0.3 cmPEDESTAL ASSEMBLY (THRILL EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors).TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.WIDTH (W): 77.0 CM. WIDTH (W): 76.1 CM.DEPTH (D): 76.1 CM.HEIGHT (H): 113.5-123.5 CM.SEAT HEIGHT (SH): 46.0-56.0 CM..( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 69 | Providing, supplying and placing of Visitor Chair. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D)BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm. (W) x 60.5cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. .TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube. Overall Dimensions of ChairSeat Height - 46.5cm.Height - 93.5cm.Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm. .( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 70 | PARTO Single Seater Sofa Leather Overall Size : Width : 92cm Depth : 87cm Height : 76cm Seating Height : 39.5cmSTITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575 ( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 71 | PARTO Three Seater Sofa Leather Overall Size : Width : 134cm Depth : 87cm Height : 76cm Seating Height : 39.5cmSTITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575 ( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 72 | Supplying Coffee Table 25mmX50mm CRC pipe (Powder Coated) 600mm/1200mm Height 450mm. 12mm toughened glass top colour- As per approval |
| 73 | Providing Godrej make Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. |
| 74 | Providing, supplying and placing of Waiting chair.SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness with circular perforations.The Side Bar is made of cold rolled M.S.sheet 0.12 ± 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts.SEAT SIZE : 50.0 cm (W) x 45.5 cm (D)BACK SIZE : 50.0 cm (W) x 56.0 cm (H)CROSS BEAM: It is made up of cold rolled steel with 0.2 ± 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end capsLEG: It is made up of cold rolled steel with 0.12 ± 0.013 cm thickness. It is powder coated. The legs are fitted with leveller cups covered with SS304 sheet.ARMREST: It is made of SS304 round tube of Ø 3.175 ± 0.03cm x 0.12 ± 0.013 cm thick formed to make an oblong shape.WIDTH (W): 173.5 CM. DEPTH (D): 74.0 CM.HEIGHT (H): 91.0 CMSEAT HEIGHT (SH): 44.0 CM. ( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 75 | Supplying Boucher Stand OR Literature Display.PLPB board to be provided as per approved designRequired sizes: H-900mmX W-600 mmX500 mm.( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 76 | Storage – Providing & Fixing: Pre-laminated particle board storage, 4'-0\\" W × 7'-0\\" H × 22\\" D, with 18 mm pre-laminated particle board construction and 9 mm back panel. Front with 2 shutters, each provided with mirror panel (5'-0\\" × 18\\"). Including handles, locks and all necessary hardware, complete providing and fixing as per approved design.( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 77 | SIDE Table & KING SIZE Bed – Providing & Fixing: Bed with 16 mm plywood top for mattress support and 16 mm plywood side structure. Bed sides and legs finished with mica/laminate as per approved photo/design. Back/headboard with cushioning and quilting, as per approved design/photo. Complete providing and fixing including required framing and finishing.( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 78 | MS Sloted Angel rack SIZE- 3'X6' – Providing & Fixing: Slotted angle rack with 1½\\" × 1½\\" MS angle (16 gauge) frame and 22 gauge MS shelves, complete with 5 shelves, including all required nuts, bolts and accessories, duly providing and fixing as per approved design. |
| 79 | Providing Classic Ortho 78*72*6, Mattress & Pillow with Cushion Superior multi-layer comfort that lasts long. With extra back support.( Make - Century/ Sleepwell/ Kurl-On etc) |
| 80 | PH WORKS |
| 81 | Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china Floor mounted rimless water closet of Hindware Flora make having cat no 20107 or equivalent type of approved make including supply of matching P/S trap to the wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:4) etc all complete including cost of WC pan, 15mm dia connection pipe ALD 803 AB, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. |
| 82 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Pedestal with wash hand basin of Hindware - Star white NEO make of size 55x40x80cm having CAT No. 11032(Pedestal) & CAT No. 10098 (Wash Basin) of approved make with Jaquar with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. |
| 83 | Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type Glass mirror of size 900mm x 600mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. |
| 84 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.- FUS - 29053 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 85 | Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.- FUS - 29041or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 86 | Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD-565 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 87 | Supplying all materials, labour, T&P and fixing standard sized CP Towel rail - 24\\" of Jaquar Cat. No.-AKP 35711PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 88 | Supplying all materials, labour, T&P and fixing standard sized CP Towel ring of Jaquar Cat. No.-ACN - 1121BN or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 89 | Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-AKP 35771P or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 90 | Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-AKP 35731P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 91 | Supplying all materials, labour, T&P and fixing Toilet paper holder of Jaquar Cat. No.-AKP 35751P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 92 | Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 93 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Pillar cock of Jaquar Cat. No.-FUS - 29001 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 94 | Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) |
| 95 | Providing and fixing white glazed Urinals 60 x 39 x 37 cm Hindware (Cat no- 60002 Eqv OF Cera/ parryware) including plumbing connections with CPVC pipefrom the water supply line to the urinal complete and concealed C.I. brackets, C.P. flush pipe, 15 mm Dia. 1no C.P. spreaders, 1 Nos. C.P. waste coupling with 1 Nos.waste pipe , 1 No PVC P/S Trap with stainless steel grating in floor. Jointing, making good the damages caused to walls & floors, painting the brackets etc. Necessary pipes between urinal & main supply line to be included in the rates. Range of single urinal basin. cost including all materials, labour,tax, T&P, lead, royality etc.work complete in all respects as per direction of Architect incharge. |
| 96 | Providing and fixing Urinal glass partition of Jaquar 1810-US of sizeH-9Ocm & width 45cm including cost of all labour T&P etc complete as per direction of Engineer -in- charge. |
| 97 | Supplying & Fixing Long body Bib cock of CP brass of Jaquar cat no- CON-107KN equivalent including making good the damages including tools, plant, all material,labour , scaffolding etc. complete in all respects. |
| 98 | Supplying & Fixing Short body Bib cock of CP brass of Jaquar cat no- FUS - 29037 or equivalent including making good the damages including tools, plant, all material,labour , scaffolding etc. complete in all respects. |
| 99 | Supplying & Fixing Concealed stop cock of CP brass Jaquar cat no-FUS - 29083K & ALD 083 equivalent including making good the damages including tools, plant, all material,labour , scaffolding etc. complete in all respects. |
| 100 | Supplying all materials, labour, T&P and fixing Wall mixture of Jaquar Cat.No-FUS-29281 or equivalent type of approved make etc complete including cutting the walls & making good the damages including cost of all materials as per specification and direction of the Er- in - Charge. |
| 101 | Supplying all materials, labour, T&P and fixing 100mm dia. Over head shower of Jaquar Cat no:- OHS-1709 & SHA-477 or equivalent type of approved make etc complete including cutting the walls & making good the damages including cost of all materials as per specification and direction of the Er- in - Charge. |
| 102 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type ) with all PVC fittings of Finolex /Prince/Supreme make as per IS 13592 to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. |
| 103 | 160mm dia PVC (SWR) pipe class \\"A\\" ( with wall thickness of 3.2mm to 3.8mm) |
| 104 | 110 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 2.20 mm to 2.70 mm) |
| 105 | 90 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 1.8 mm to 2.20 mm ) |
| 106 | Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of bedding for 160mm pvc pipes of the following internal diameter including curing complete as per specification |
| 107 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of AJAY/ ASHIRVAD/ ASTRAL / SUPREME / ORI-PLAST ETC) confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 108 | 20 mm nominal outer dia Pipes |
| 109 | Providing and fixing UPVC pipes of Schedule-80 ( AJAY/ ASHIRVAD/ ASTRAL / SUPREME / ORI-PLAST ETC) including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 110 | 25 mm nominal outer dia Pipes |
| 111 | 32 mm nominal outer dia Pipes |
| 112 | 50 mm nominal outer dia Pipes |
| 113 | Providing and fixing gunmetal fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects |
| 114 | 25mm dia |
| 115 | 32mm dia |
| 116 | 50mm dia |
| 117 | Cutting grooves in pucca floors and walls for taking GI/PVC /CPVC pipes including making good the damages caused with cost of all material,labour, scafolding, tools, plant, royalty etc. complete in all respects. |
| 118 | Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 119 | Supplying all materials,labours,T&P and constructing gully trap chamber of 250mmx 250mm inside size with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size hg chips,foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plaster in cement mortar (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mm x150mm size CI grating etc all complete as per approved drawing,specification and direction of Engineer-in-charge. |
| 120 | Providing & Constructing manhole chamber of following sizes including earth work in excavation, back filling,KB Brick masonary work four sides to make chamber, Plain Cement Concrete (1:2:4) 30cm depth in bottom of chamber with 1/2\\" down graded Crusher broken hard granite chips, inside cement plaster 12mm thick in CM 1:3 & neat cement punning , Top slab in RCC ( 1:2:4) 15cm thick with necessary centering & shuttering, TMT steel reinforcement @10 cm c/c both way, cast iron manhole cover with frame, making channel in floor of chamber with necessary slope complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge. |
| 121 | Plain manhole inside 900x800and 450mm deep with cast iron manhole and frame(light duty) rectangular type 450mmx610mm internal dimension. |
| 122 | Extra for ever additional depth of 100mm or part there of 900x800x450mm chamber |
| 123 | Plain manhole inside 1200x900and 900mm deep with cast iron manhole and frame(medium duty) circular 560mm internal dia , wt of cover and frame to be not less than 128kg. |
| 124 | Extra for ever additional depth of 100mm or part there of 1200x900x90mm chamber |
| 125 | ELECTRICAL FITTINGS & GUDGETS |
| 126 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision)/equivalent and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision)/equivalent of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. |
| 127 | GROUP-A |
| 128 | GROUP-B |
| 129 | GROUP-C |
| 130 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision)/equivalent .(Maximum 02 nos point in one circuit). |
| 131 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (vision)/equivalent .(Maximum 02 nos point in one circuit). |
| 132 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision)/equivalent |
| 133 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal/equivalent as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 134 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal/equivalent as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 135 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal/equivalent as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5) |
| 136 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI /V-Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal/equivalent as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB) (4X6+2X4) |
| 137 | Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB of suitable size as required as per direction of Engg.-in-Charge . |
| 138 | Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Havells/Anchor as required as per direction of Engg.-in-Charge. |
| 139 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision)/equivalent |
| 140 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. |
| 141 | Supplying, installation, testing and commssioning of 1200 mm sweep Copper wound BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix /Bajaj Turbo Pro 12DC5/equivalent ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge, |
| 142 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj/equivalent). |
| 143 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj/equivalent). |
| 144 | Supplying and fixing 6- 32 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. |
| 145 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 . the existing MCB DB complete with connections as per direction of Engg.-in-Charge. |
| 146 | Supplying and fixing 40Amps 4P 415 volts, MCB Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. |
| 147 | Supplying and fixing 63Amps 4P 415 volts MCB 415 volts, C series,10KA breaking capacity, Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB with connections as per direction of Engg.-in-Charge. |
| 148 | Supplying,installation,testing & commissioning Of Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as per direction of Engg. in charge. |
| 149 | Supplying & laying of 6 swg GI WIRE at 0.5m below the ground as strip earth electrode including connection/termination with nut ,bolt ,spring washer etc as required(jointing shall be done by over laping and with 2 sets of brass nut ,bolt & spring washer spaced at 50mm as required as per direction of Engg. in charge. |
| 150 | Supplying & laying of 25mm x 5 mm GI strip at 0.5m below the ground as strip earth electrode including connection/termination with nut ,bolt ,spring washer etc as required(jointing shall be done by over laping and with 2 sets of brass nut ,bolt & spring washer spaced at 50mm as required as per direction of Engg. in charge. |
| 151 | Supply, installation, testing and commissioning of LED Design based BIS approved LED Street Light with system power of 120W, CCT in 5700K as per ANSI) ,CRI>70, SDCM<3 , LEDs used should have a life of 50,000 burning hrs. & Lumen maintenance as per L70. The Luminaire System lumens should be >=19,200 Lumens @5700K. The fixture housing must be Made of ADC 12 PDC Aluminium housing for rapid thermal healing & Powder coated by Corrosion resistant Nano coating technology. Luminaire must have a Ingress protection of IP66 and Impact Resistance of IK08. The light engine should use Metal Core PCB with high grade aluminium (AL5052) and should have a thermal conductivity of >2W/mK. The fixture should have an UV stabilized Injection moulded special PC lens optics(Glass not allowed) ensuring low glare & best in class uniformity. The light and the driver compartment should be thermally isolated by a natural airgap. Luminaire housing and optical compartment both should carry OEM's logo embossed / engraved (no stickering is allowed). The luminaire must have Integral encapsulated high efficiency electronic thermally isolated driver having a Aluminium extrusion construction with rated voltage of 100-300V, power factor > 0.95, THD < 10%, with Inbuilt surge protection of min 6KV and upgraded with integrated IP67 protected SPD of 20KV/10KA surge protection with all necessary safety protection like mis-wiring, Over voltage, Short circuit, Reverse Polarity protection. . The compartment should be bottom openable for ease of maintenance at site. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. (Make: PHILIPS/WIPRO/BAJAJ/Crompton/PANASONIC/LT/HAVELLS) |
| 152 | Supply and fixing of 5kVA Voltage stabilizer (Make-V-Guard/Microtek |
| 153 | Supply and Installation of All In One Desktop-14th Gen, Intel Core i-5 Processor, Windows-11, Ms Office, 16GB Ram, 512 SSD, 23.8'' Display (3 Year Onsite Warranty) etc complete with all materials & labour as required as per the direction of Engineer-in Charge. HP (440G9) /equivalent |
| 154 | Supply and Installation of Luminous 600VA UPS etc complete with all materials & labour as required as per the direction of Engineer-in Charge. |
| 155 | Supply and Installation of water purifier with RO+UV+UF COPPER etc complete with all materials & labour as required as per the direction of Engineer-in Charge. Make-AQUAGUARD ENRICH GLORY/Equivalent |
| 156 | Supply and Installation of invertere having VA Rating 2000VA/24VPure Sine Wave Inverter,Support two battery,Running Appliances - LED bulb, Ceiling Fan,Television,Set Top Box & Room Cooler,Compatible with Tubular battery(80Ah - 250Ah)etc complete with all materials & labour as required as per the direction of Engineer-in Charge. Make-LUMINOUS EVO S 2300/Equivalent |
| 157 | Supply and Installation of inverter tabular battery 200AH with 60 month warranty etc complete with all materials & labour as required as per the direction of Engineer-in Charge. Make-LUMINOUS ILTT 25060/Equivalent |
| 158 | Supply and Installation of trolley for inverter and battery etc complete with all materials & labour as required as per the direction of Engineer-in Charge. Make-LUMINOUS TX100L/Equivalent |
| 159 | Supply of 4 MP IP Indoor AUDIO Dome Camera Specification : Image Sensor: 1/2.7 CMOS Image SensorEffective Pixels : 2688 (H) × 1520 (V) resolution at 25/30 fps.Smart Illumination & Starlight Sensor: Sharp and balanced footage even in ultra-low light.Angle Adjustment : Pan: 0°–360°, Tilt: 0°–78°, Rotation: 0°–360° Image Rotation : 0°/90°/180°/270° Video Compression : InstaStream, H.265, H.264 variants, MJPEGStream Capability : Support Triple StreamBuilt-in Audio — Integrated microphone for audio-enabled surveillance.Audio Compression: G.711a, G.711Mu, PCM, G.726, AACRAM :128 MBIR : Smart IR Secure Connectivity : PoE support and multi-layered cybersecurity.Certification : ISO 9001: 2015, ISO 20000-1 : 2018, ISO 14001 : 2015, ISO 45001 : 2018, ISO 50001:2018, CE, FCC, RoHS and BIS, STQC approvedMake- CP PLUS, PRAMA, HONEYWELL/EQUIVALENT |
| 160 | Supply of 4 MP IP AUDIO Outdoor Bullet Specification : Image Sensor: 1/2.9 CMOS Image SensorEffective Pixels : 2688 (H) × 1520 (V)Angle Adjustment : Pan: 0°–360°, Tilt: 0°–90°, Rotation: 0°–360°Image Rotation : 0°/90°/180°/270° Video Compression : Supports Instastream, H.265, H.264+, H.264, H.264H, H.264B, and MJPEG (sub-stream only)Back Light Compensation : WDR (120 dB), Day/Night (ICR), 3D‑NR, ROI, AWB, AGC, HLC, BLC, digital watermarkingStream Capability : Support Triple StreamDORI Distance: 85.4 m (Detect), 34.2 m (Observe), 17.1 m (Recognize), 8.5 m (Identify)Audio : Support Built-in MicAudio Compression: G.711a, G.711Mu, PCM, G.726, AACRAM : 128 MBROM : 128 MBIR : Smart IR Robust cybersecurity: AES‑256 encryption, configuration encryption, trusted boot/execution, HTTPS, IP/MAC filtering, account lockout, WSSE, syslogCertification : ISO 9001: 2015, ISO 20000-1 : 2018, ISO 14001 : 2015, ISO 45001 : 2018, ISO 50001:2018, CE, FCC, RoHS and BIS, STQC approvedCP PLUS, PRAMA, HONEYWELL/EQUIVALENT. |
| 161 | Supply of 8 Channel NVR Specification : Processor : Industrial-grade embedded micro-processorVideo Resolution : HDMI: 3840×2160, 1920×1080, 1280×1024, 1280×720 VGA: 1920×1080, 1280×1024, 1280×720Video Recording: Max 80 Mbps, 8MP/6MP/5MP/4MP/3MP/1080P/ 720P/ D1&etc.Decoding Capability: AI disabled: 1-channel 12MP@30 fps; 1-channel 8MP@30 fps; 2-channel 5MP@30 fps; 3- channel 4MP@30 fps; 6- channel 1080p@30 fps AI enabled: 1-channel 8MP@30 fps; 1-channel 5MP@30 fps; 2-channel 4MP@30 fps; 4- channel 1080p@30 fps Hard Disk: 2 SATA III ports, up to 10TB Each.Record Interval : 1~120 min (default: 60 min), Pre-record: 1~30 sec, Post-record: 10~300 sec Backup Mode : USB Device / Network Protocols: HTTP/HTTPS, TCP/IP, IPv4/IPv6, RTSP, UDP, NTP, DHCP, DNS, IP Filter, DDNS, RTSP, IP Search, P2P, ONVIF 2.4, SDK, CGIMake-CP PLUS, PRAMA, HONEYWELL/EQUIVALENT |
| 162 | Supply of 2TB Surveillance Hard Disk Specification : Interface : SATA 6Gb/sCache : 64MBBytes per Sector : 4096Operating (ambient, min) : 0°COperating (drive case, max) : 70°CMax Sustainable Transfer Rate : 180MB/sVoltage Tolerance, Inc. Noise (5V) : ±5%Load/Unload Cycles : 300,000Nonrecoverable Read Errors per Bits Read, Max : 1 per 10E14 Seagate / WD |
| 163 | Supply of 8 Port GIGABIT PoE SwitchSpecification : Network Standard: IEEE 802.3i 10BASE-T/IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3x Flow Control, IEEE 802.3af/at/bt Power over Ethernet Bandwidth: 20 GbpsTransmission Rate : 2000Mbps Full Duplex; 10 or 100 or 1000 Mbps Half DuplexNetwork Latency : (10 to 1000Mbps): ≥16μs (use the 64byte package size). Make. CP PLUS, D LINK, HI-FOCUS/EQUIVALENT |
| 164 | Supply of Cat-6 Cable (With PVC Pipe & Casing)Specification : Conductor: Solid Bare lectrolytic Grade CopperNominal Conductor Diameter : 23 AWGInsulation : Polyethylene (LDPE)Outer Sheath : PVC Sheath/ LSZHConductor Resistance of solid cable : 93.5Ω/1000 Mtr@20°C Max. Make- D Link/Equivalent |
| 165 | Supply of RJ45 Connector.D Link/Equivalent |
| 166 | Supply of Cat-6 Patch Cord. D LINK/Equivalent |
| 167 | Supply of IP Camera PVC Box. |
| 168 | 4U NVR RackDescription: Front Glass Door (tinted, Toughened) with Lock & Key 2 pairs of 19\\" Mounting Rails with Welded Side WallsAccessories : 1U Cable Manager (1), Hardware Packet (1 Pkt) 3Socket 5 Amp. Power Distribution Unit (1 No) Roof Mounted Fan Unit / 90 CFM /230V AC (1 No). Make-CP PLUS, PRAMA, HONEYWELL/EQUIVALENT |
| 169 | Installation & Service Charge (Lying of Cable, Installation and configuration of CCTV Camera, DVR) |
| 170 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . |
| 171 | 1.5 TR with 5 Star BEE Rating (LG-AS-Q20JWZE/ O General-ASGG18CGWA-B/ Daikin-FTKU50XV16/equivalent) |
| 172 | 2.0 TR with 5 Star BEE Rating (O General-ASGG24CGWA-B/ Daikin-FTKM60XV16/equivalent) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender