Tender For Water Supply Scheme For Residental Block And Hostel Block At Gdc Nubra Collage Nubra.
Tender Value
59.12 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
0 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Water Supply Scheme For Residental Block And Hostel Block At Gdc Nubra Collage Nubra.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) infoundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, includinggetting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m |
| 2 | Ordinary Rock |
| 3 | Hard Rock |
| 4 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot& cold water supply including all PP-R plain & brass threaded polypropylenerandom fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes thecost of cutting chases and making good the same including testing of jointscomplete as per direction of Engineer in Chajge.20mm dia |
| 5 | 25mm dia |
| 6 | 32mm dia |
| 7 | 40mm dia |
| 8 | Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends and fixing collars with cement mortar 1:2including cost of all materials, labour curing including cost of specifications 500mm dia NP3pipes for road crossings |
| 9 | Providing supply and fitting of ball valves class 1&2 conforming to IS 778/1986 with all necessary fittings required for the installation of ball valves in HDPE pipes complete job.40mm dia |
| 10 | 32mm dia |
| 11 | 25mm dia |
| 12 | 20mm dia |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating eachdeposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m |
| 14 | Excavating,Supply and filling of local earth (incld. Royalty) by mechnical transport upto alead of 5Km also including ramming and watering of earth in layers not exceding 20cm im trenches of foundation etc, complete. |
| 15 | Transportation of boring equipment,machine,tools to the new site of bore work ,fixing of complete camp by way of erection of equipment, tools ,accessories attachment fixing of tent for labour and stacking of material at borewell site.The job also includes levelling of ground, drilling machine and other charges on account of POL etc. a)For 1st shifting of boring machine and equipment |
| 16 | a)For 2nd shifting of boring machine and equipment |
| 17 | Drilling of bore hole with 125mm dia bit using ODEX method of drilling as per site condition up to depth in collapsible /rocky strata, conglomerate boulders pebbles, clay etc. Including cost of MS casing pipe consumable store, drilling bits POL etc. with the system of simultaneously lowering of 200 mm dia ID M.S. casing pipe of class B which shall be welded together |
| 18 | Commissioning and lowering of buit controllar in motor 3HP dual solar submersible pump set in 5inch dia tube well for clear accessories .PV test certificate IEC 61730 part 1and 2 IEC 61215 at standard temperature condition .PV array rating requirment minimum 960WPper HP .Number of modules /system as per system requirment .PV arry mounting arrangement .fixed (hot dip galvanised IS 4759).Type /capacity submersible 3HP minimum pump capacity 160LPM .PUMP SHALL BE A MULTISTAGE CENTRIFUGAL PUMP with radial or mixed flow impeller design suitable for clean to slightlycontaminated water with permissible sand content .EPOXY coated treatment to ferrous part for rust prevention and longer life non return valve fitted to discharge outlet to prevent backflow dynamically balanced impellers with shaft .SS-304 or higher as required .motor with inbuilt controller oil -cooled with submersible flat -sheathed copper conductor cable waterproof PVCof standard /reputed make as per requirment .Cable conductor size depending upon array current shall be provided from PV arrary to the pump. |
| 19 | Design ,supply and installation testing and comissioning of 2HP dual solar submersible pump ,(Grundfos or equivalent parameter specification and properties ) discharge of 2-5LPS and hgead of 96mtr nominal operating cell temperature (NOCT :45+/-20c),temperature co-efficient at NOCT (-0.286TO 0-4)Maximium power at NOCT,maximium power at STC, ,performance ration (79%to 82%)modual efficiency (21or more )required system peak output power with modual orinentation -south )400wp or above ,capacity per modual (Nano perc)numer cellin each modual (as per provided)certification standard (complance as per certification )numer of modual (as per provider )IP rating for modual (IP67)WEIGHT (KG)AND SIZE (LXHXWmm)of each modual as per provider )IP rating for VFD and DB (IP 54with additional encloseure /IP65)solar cell material (mono perc )percentage of depreciation in performance (as per provider )minimum ower neneration )(------)kwh /sq.m/dy product warrenty (vendorto declare)PV Modual (minimum 12year )VFD(minimum 2years)installation warrenty (minimum 2years) system performance guarantee (minimum till break even )RIO/break even (year )TCO in INR (20years )indicate \\"ve\\"for benefit )DP (year)Note vendor shall be responsible for solar power generation solar PV modual stainless steel solar submersible pump and motor ,motor controllar ,GI mounting structure set DC cable as persite requirment ,cable AC as per site requirment safety rop as per diameter of pump ,chain pully of 1ton capacity the job also include any other civil /mech item required to make the system functional. |
| 20 | Providing and fixing of materials for insulation of pipe with nitrile tube tapping with cello tap rockwool6''per side .wire mesh polythen tapping with cello tape alumunum sheet 26guage cadding with dia complete as per direction of engineer in -charge 40mm dia |
| 21 | Providing and and fixing of heat tape 33wstt on PPR pipes made of defored or chormelox or equlivent make as approved by engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender