Tender For Repair/ Renovation Of Quarter Near Moti Market ( A-10)
Tender Value
5.79 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
0 days left
EMD
11580
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Renovation Of Quarter Near Moti Market ( A-10)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 100mm pine wood plain tongued, including wooden plugs complete with necessary screws and priming coat on unexposed surface,10mm thick. |
| 2 | Providing and fixing flat pressed 3 layer particle board medium density exteriorgrade (Grade I) or graded wood particle board IS : 3087 marked, to frame,backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 12 mm thick |
| 3 | French spirit polishing :Two or more coats on new works including a coat of wood filler |
| 4 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded andprepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texturelaid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high glossfinish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment ofmatching shade complete. |
| 6 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x510 mm bowl depth 200 mm. |
| 7 | Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion holdfasteners including necessary filling up of gaps at junctions, at top, bottom andsides with required PVC/neoprene felt etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 8 | Providing and fixing 12mm thick prelaminated particle board flat pressed threelayer or graded wood particle board conforming to IS: 12823 Grade 1 Type II inpanelling fixed in aluminium doors, windows shutters and partition frames withC.P. brass / stainless steel screws etc. complete as per architectural drawings anddirections of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides. |
| 9 | Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of engineer-in-charge . (Cost ofaluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 10 | Providing and fixing of transparent UV- stabolized 16mm triple layer polcarbonate sheet with carriage complete. |
| 11 | Providing and fixing stainless fancy handle of approved make fixed with SS Screws complete as per direction of Engineer-in -charge. |
| 12 | Providing and fixing Hydraulic hinge of approved quality for thick door with stainless steel screws complete ( Full Kabza) |
| 13 | Providing and fixing flat pressed 3 layer particle board medium density exteriorgrade (Grade I) or graded wood particle board IS : 3087 marked, to frame,backing or studding with screws etc. complete (Frames, backing or studding to bepaid separately): 18 mm thick |
| 14 | Providing and Fixing 12mm thick prelaminated flooring of approved brand as per the direction of engineer incharge(complete job AC4 including carriage.) |
| 15 | Providingand fixingwater closet squattingpan (Indian typeW.C. pan )with100mmsandcast IronPorStrap,10litrelowlevelwhiteP.V.C. flushingcisternwithmanuallycontrolleddevice(handlelever)conformingtoIS:7231,withallfittingsandfixturescomplete includingcuttingandmakinggoodthewallsandfloors wherever required : 17.1.1 WhiteVitreouschinaOrissapatternW.C.panof size580x440mmwithintegral type foot rests. |
| 16 | Providing and fixing Sunmica laminate Sheet for furniture ( Complete job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender