Tender For Repair & Maintenance And Provision Of Wire Mesh In Windows In 120 Men Jawan Barrack Held In Charge Of 154 Bn Bsf At Bsf C Us Ambassa Under Shq Bsf Teliamura.
Tender Value
12.49 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
4 days left
EMD
24999
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khowai → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance And Provision Of Wire Mesh In Windows In 120 Men Jawan Barrack Held In Charge Of 154 Bn Bsf At Bsf C Us Ambassa Under Shq Bsf Teliamura.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :-For fixed portion-Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :-For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)-Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 3 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.-Upto 5mm depth and 5 mm width |
| 4 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.-Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 5 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.-For thickness of tiles 10 mm to 25 mm |
| 7 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:-White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 8 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 9 | Modified Estimated Cost after using Correction factor on DSR 2023 on acount of GST @ 0.973 |
| 10 | Add Cost Index @ 60% on DSR 2023 |
| 11 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.a) 3 x 1.5 sq. mm |
| 12 | b) 3 x 2.5 sq. mm |
| 13 | c) 1 x 1.5 sq. mm |
| 14 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.20 mm |
| 15 | Supplying and fixing following Piano type switch/ socket on the existing switch box/ cover including connections etc. as required.a) 5/6 Amp. Switch |
| 16 | b) 3 pin 5/6 Amp. Socket outlet |
| 17 | c) 15/16 A switch |
| 18 | d) 6 pin 15/16 A socket outlet |
| 19 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required. |
| 20 | Supplying and fixing PVC batten/ angle holder including connections etc. as required |
| 21 | Supplying and fixing of 300 mm sweep exhaust fan suitable for single phase, 50 Hz, 230 volts, AC supply in existing opening including making the hole to suit the size of above exhaust fan & S/F of louver / shutter including connection, testing and making connection with 1.5 sq.mm., FR, PVC insulated, copper conductor, single core cable and earthing etc. as required etc Havells ventil air DX White/crompton make equivalent to Bajaj / Crompton / Havells / Khaitan. |
| 22 | Providing and fixing of 20 Watt, 6500K LED decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack directly on ceiling/ wall, including round sheet,connections, testing and dismantling the existing complete etc. as required. make Havells/CG/ philips/ Syska |
| 23 | Providing and fixing of 5 Watt, 6500K LED decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack directly on ceiling/ wall, including round sheet,connections, testing and dismantling the existing complete etc. as required. make Havells/CG/ philips/ Syska |
| 24 | Providing and fixing of 18 Watt, 6500K surface round LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack directly on angle/batten holder , including connection,testing and dismantling the existing complete etc. as required. make Havells/CG/ philips/ Syska |
| 25 | Providing and fixing 09 watt LED lampwith extruded polycarbonate, environmental friendly, energy efficient ready to use pack directly on ceiling/ wall, including round sheet,connections, testing and dismantling the existing complete etc. as required. make Havells/CG/ philips/ Syska |
| 26 | Supplying, installation, testing and commissioning of 70 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire should have suitable for operation on voltage range 140-270V, 1Φ, 50Hz AC supply system, and a mechanical impact resistance rating of lk>=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 120 lm/W. The luminaire shall be designed for an average system life L70B50: 50000 hours and suitable for mounting on the pole bracket up to outer dia 50 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters. |
| 27 | Total Cost (BoQ1+BoQ2) |
| 28 | Civil work |
| 29 | Elect work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender