Tender For E-Tender For Repair And Renovation Of Ground Floor At Nabard, Tamil Nadu Regional Office, Chennai
Tender Value
70 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
11 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E-Tender For Repair And Renovation Of Ground Floor At Nabard, Tamil Nadu Regional Office, Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Demolition & Dismantling Work |
| 2 | Demolishing RCC Work |
| 3 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.The demolished area shall be fully enclosed with heavy-duty tarpaulin barricading to prevent the spread of dust and debris to adjoining occupied areas. The barricading shall be adequately supported with necessary framing, bracing, and fixing arrangements, complete in all respects, for safe and effective isolation of the work zone. |
| 4 | Core cutting work |
| 5 | Providing and making RCC slab core cutting/opening using suitable diamond core cutting machine of required diameter and depth including marking, machiune, labour, cutting blade, wate, removal of concrtete debis, safety arrangments and all incidental works, at location shown in the drawing or as direction of Engineer - in- charge. The demolished area shall be fully enclosed with heavy-duty tarpaulin barricading to prevent the spread of dust and debris to adjoining occupied areas. The barricading shall be adequately supported with necessary framing, bracing, and fixing arrangements, complete in all respects, for safe and effective isolation of the work zone. |
| 6 | Demolishing Brick Work |
| 7 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. The demolished area shall be fully enclosed with heavy-duty tarpaulin barricading to prevent the spread of dust and debris to adjoining occupied areas. The barricading shall be adequately supported with necessary framing, bracing, and fixing arrangements, complete in all respects, for safe and effective isolation of the work zone. |
| 8 | Dismantling of Flooring/ Dado/ Cladding Tiles |
| 9 | Dismantling manually or by mechanical means all type of existing Floor / Dado / Cladding Tiles including kitchen and vanity platform at all height and location. The contractor should take care that dismantling of structure should not cause any damage to the existing / adjacent structures near the building and even take care of dust control, noise control etc. Blasting is not permitted. All the work shall be carried out as instructed by Architect The rate to include carting away unserviceable material / debris to a place approved by Municipal Corporation. The work also includes levelling the ground after carting away. |
| 10 | Carraige of Material |
| 11 | Carriage charge for disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, stacking, unloading to approved municipal dumping ground/unobjectionable place as/direction of Engg- in-Charge beyond NABARD Premises for all leads and including all lifts |
| 12 | Civil Works |
| 13 | 230mm Brick Work |
| 14 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :With F.P.S.(non modular) bricks |
| 15 | 115 mm Brick Work |
| 16 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 17 | Plain Cement Concrete |
| 18 | Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement. |
| 19 | Design Mix |
| 20 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work using cement content as per approved design mix manufactured in fully automatic batching plant & transported to site of work in transit mixer for all leads having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing & reinforcement including cost of admixtures in recommended proportions as per IS:9109 to accelerate/ retard setting of concrete, improve workability without impairing strength & durability as per direction of Engineer-in-charge(Note :- Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix (if any) will be recoverable separately. No extra payment against extra cement if used shall be payable. |
| 21 | Shuttering |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 23 | Steel Reinforcement |
| 24 | Fe 550 D Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 25 | Chemical Rebarring |
| 26 | Drilling the holes into existing RCC structure viz. column, beam, slab etc. of appropriate diameter and depth equal to 10 times diameter of the bar to be inserted, thereafter, providing and inserting reinforcement bars and injecting the holes by approved quality chemical as per manufacturer's specification etc. complete as directed by Engineer-in-charge. Rate should include cost necessary scaffolding, staging etc. for execution of work at all heights and locations complete as per site conditions and provided drawings. |
| 27 | Ceiling Plastering |
| 28 | Providing and laying cement plaster on surfaces with fine sand including curing of 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)including necessary scaffolding, curing etc.complete as directed by the Engineer-in-charge. |
| 29 | Inner Plastering |
| 30 | Providing and applying in position average 12 mm thick smooth finish cement Plaster in cement mortar 1:6 to all inetrnal walls, using fine or Coarse sand and adding polypropylene fibre of approved quality in desired quantity per bag of cement as per manufacturers specifications complete. Rate includes providing chicken mesh to all joints of RCC members with Brick walls in all positions in proper line, level & plumb at all levels and heights with necessary scaffolding, cleaning of surfaces, raking outjoints, roughening of surfaces ,curing etc complete as directed at site. |
| 31 | External Plastering |
| 32 | Providing and laying in position external Sand Face Cement Plaster, average 18 mm thk, in two coats, at all heights with first coat of av. 12 mm thk in Cement Mortar 1:5 using natural silt free fine sand, and second coat of average 6 mm thickness in C.M. 1:3, including necessary stagging, scafolding, curing, roughening the first coat to recieve second coat of plaster etc, providing approved water proofing compound @1 kg per bag of cement or as specified by the manufacturer and adding polyproplyne fibre of approved make as per manufacturers specifications to prevent shrinkage cracks, complete as directed by the Engineer-in-charge. |
| 33 | Floorings |
| 34 | Vitrified Tile Flooring |
| 35 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size |
| 36 | Size of Tile 600x600 mmBasic Rate of Tile: ₹68.00/sq.ft. |
| 37 | Size of Tile 800 x 1600 mmBasic Rate of Tile: ₹130.00/sq.ft. |
| 38 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 39 | Size of Tile 600x600 mm |
| 40 | Size of Tile 800 x 1600 mm |
| 41 | Marble wall cladding |
| 42 | Providing and fixing 18–20 mm thick marble slabs over newly constructed wall, including 12–15 mm thick cement plaster backing in CM 1:4 mix, properly levelled and cured. Surface preparation including cleaning and levelling of the plastered wall, followed by marking for proper line, level and alignment. Marble slabs shall be measured, cut and prepared as per site dimensions, including backside cleaning and necessary edge/corner cutting. Marble fixing shall be carried out using suitable marble adhesive/mortar with an approximate 8–10 mm fixing bed, maintaining proper alignment, level and uniform joints, including required mechanical supports wherever necessary. All joints shall be properly filled with suitable joint filler/epoxy, followed by edge finishing, corner detailing, grinding and machine polishing of the marble surface to achieve a smooth and uniform finish. The completed marble wall cladding shall be thoroughly cleaned and handed over in finished condition, including all required skilled labour, loading and unloading, transportation of materials to and from the site, shifting of materials within the site, and necessary scaffolding/access arrangements, complete in all respects. Base Rate - Rs. 380 Sq/ft |
| 43 | Paver Tile |
| 44 | Providing and laying in position approved quality chamfered edge factory made, M-30 grade cement concrete interlocking Paver Tiles of size 300x300x50mm laid in required colour and pattern including laying 50 mm thick compacted bed of coarse sand, filling the joints with fine sand, finishing and sweeping extra sand etc. in footpath, compound area, driveway etc. complete as per the direction of Engineerin- charge. Rates to inclusive of cutting of paver tiles as per required size and pattern including wastage, transportation etc. complete. |
| 45 | Pre polished Granite Laying Work |
| 46 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Basic Rate: 160.00/Sft |
| 47 | Natural Leather Finish Granite for Steps |
| 48 | Providing and laying 20 mm thick natural leather-finish granite for steps, landings, lobby and ramp, of approved size, colour and pattern, laid in CM 1:3, including cutting, dressing, polishing, machine-cut anti-slip grooves on steps, nosing wherever necessary, and all materials, labour and incidentals, complete as per drawings, specifications and as directed by the Engineer-in-Charge. Basic Rate: 150.00/Sft |
| 49 | Teak wood frames |
| 50 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length, Second class teak wood. |
| 51 | Flush Door with Laminate Finish |
| 52 | Providing and fixing 35 mm thick flush door shutter with 1.0 mm thick approved laminate on both sides, fixed in 100 × 50 mm second class teakwood frame. Shutter shall have 10 mm thick glass vision panel at centre with first-quality teakwood beading and necessary horizontal/vertical decorative grooves with 6 × 6 mm SS rods, all as per approved design. Including 125 mm heavy-duty SS ball-bearing hinges, SS handles, SS tower bolts, mortise / Cylinder lock-1 No, floor-mounted SS door stopper, door closer and all necessary hardware/accessories. Exposed teakwood and shutter edges shall be neatly finished with enamel paint. All fixing, cutting, grooving, puttying and finishing shall be complete as per drawings and to the satisfaction of the Architect/Bank's Engineer. Door/frame make: Kutty/Sharon/Century; Hardware /accessories: Dorma/ Godrej or approved equivalent.Basic Rates: Shutter – ₹1860/m²; Laminate – ₹650/m². |
| 53 | Fully Glazed Door |
| 54 | Providing and fixing in position frameless glass door shutter made using 12mm thick toughened glass fixed to the partition (glazed / solid / gypsum partitions) using heavy duty floor spring with pivot of approved make including necessary cutting of floor and making the surfae good to its original position including all necessary Patch fittings of approved make and fixtures & hardwares.Approved make: DORMA Top Pivot - PT 24, Top Patch Fittings - PT 20, Bottom Patch fittings - PT 10, Floor Spring - BTS 75 V, Corner lock with strike plate and Euro Profile Cylinder - US 10, Handle - TG DIH600 - 600mm length) or equivalent brand fittings from Hettich / Hafele / as per sample approved by the Bank. |
| 55 | Inner Painting |
| 56 | Preparing surfaces including wall chasing for electrical works as instructed by bank and applying 1 coat of white cement, 2 Coats of Cement based Putty, 1 coat of primer and 2 Coat Premium acrylic emulsion paint of interior grade to all walls and ceiling of slabs, sides and soffit of beams etc., of coverage of 8 to 10 sqm per liter including all materials, labours, leads, lifts, scaffolding complete. |
| 57 | Puff Sheet Roofing |
| 58 | Providing and fixing of GI Colour coated 50mm PUF Sandwich for roofing complete with all necessary hardware, of approved brand and manufacture. Basic Rate : Rs.110.00 / Sft. |
| 59 | GI Gutter |
| 60 | Supply and fixing of GI gutter 150mm with downpipe mounted by steel brackets, fixed with suitable G.I screw, water resistant sealent applied in joint end caps fixed at ends. |
| 61 | ACP Cladding |
| 62 | Supplying and fixing aluminium composite cladding of exterior grade with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary door provisions, accessories complete in all respects including all labour, scaffolding charges etc., complete for finished item of work. ACP Cladding - 4 mm thick. |
| 63 | WPC Louvered Panel |
| 64 | Supply and fixing of exterior-grade WPC louvered panels of 12 mm of bank approved brand, including all necessary aluminum framing/supports, brackets, fasteners, cutting, drilling, alignment, finishing, and installation complete as per approved drawings and specifications. |
| 65 | PEB Work |
| 66 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, all complete as per approved drawing. |
| 67 | Structural Steel Painting |
| 68 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 69 | SS Glass Handrail |
| 70 | Providing and fixing in position Toughened Glass Railing with Stainless Steel framework to Staircase, Balconies, etc. 1000 mm height from Finished floor level comprising of 50mm dia 1.60 mm thick Glossy finished SS Pipe handrail supported on 25/32mm dia. Circular or square, 2.0mm thick (14 Gauge) SS hollow pipes balustrade placed at 900mm centre to centre (or actual division as per site conditions), mounted on SS 304 grade solid base plate 100mm x 8mm and fixed to floor / staircase treads with the help of dash fasteners (HILTI / FISCHER make) including providing and fixing 12mm thick toughened glass panels of required between balustrades using appropriate specially developed high strength SS brackets/patch fittings complete as per Architectural drawings and as directed at site by the Engineer-incharge. |
| 71 | Interior Works |
| 72 | Gypsum False Ceiling |
| 73 | Providing and fixing false ceiling at all height including providing and fixing of frame work made galvanized M.S. sections as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long |
| 74 | Fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of Engineer in charge including cost of painting the false ceiling with two coats of acrylic emulsion paint over a two coat of putty. |
| 75 | 12.5 mm thick tapered edge gypsum moisture resistant board |
| 76 | Gypsum Partition |
| 77 | Providing and fixing in position 75 mm Gyp Board partitions, including curved partitions, comprising approved quality GI channel framing of 0.50 mm thick horizontal channels, 50 mm wide with 32 mm equal flanges, rigidly fixed to floor and ceiling using suitable screws and nylon plugs; 0.50 mm thick vertical channels, 48 mm wide with 34 mm and 36 mm flanges, fixed within the horizontal channels at 610 mm c/c with metal screws at 450 mm c/c; including intermediate horizontal channel supports/stiffeners at vertical intervals not exceeding 1.20 m, with additional supports at door openings, cut-outs and curved portions, complete as per OEM specifications. Providing and fixing 12.50 mm thick approved quality Gyp Boards on both sides of the framework with staggered joints, using 25 mm dry wall screws at 300 mm c/c, including 0.90 mm thick, 99 mm wide GI channels with 9.5 mm flanges at all horizontal board joints, fixed to studs with metal-to-metal flat-head screws. The work shall also include jointing and finishing of Gyp Boards with approved OEM jointing tape, jointing compound, 25 mm × 25 mm × 0.5 mm angle beads at corners, joint finisher, etc., followed by application of full wall putty along with two or more coats of approved quality acrylic emulsion paint over two coats of approved primer, complete in all respects as per manufacturers’ specifications and directions of the Engineer-in-Charge.Basic Rate : |
| 78 | Slimline Glass Partition |
| 79 | Providing and fixing 12mm thick straight toughened glass full height partitions comprising as under:(i) Framing:- Made using 80 x 18mm, approved make, powder coated aluminium sections of SLIM LINE series at floor and false ceiling level as per manufacturers' specifications.(ii) Door Frames/Openings: Made using 105x25mm, approved make, powder coated aluminium WIDE LINE sections for Door Frame. The two vertical sections of the frame shall be extending upto false ceiling level and horizontal section shall be provided at door top level. The rate shall be inclusive of all fittings and accessories viz. stake1, stake3 and wedge 3G/B from FFL to the bottom of false ceiling height.(iii) Glazing:- Providing 12mm thick toughened clear glass panels of approved make to the frame sections fixed properly as per manufacturers' specifications including sealing glass joints using approved silicon sealant on both side.(iv) Fixing flush stop of size 20mmx15mm for door frame visible joint, grooves of size 12 mm etc complete. |
| 80 | Ply Panelling with Veneer Finish |
| 81 | Providing & fixing in position full height 12mm BWR ply partitions finished with 4mm Veneer of approved design Made out of 50mm x 50mm, 1.2 mm thick hollow aluminium square sections at spacing not exceeding 600 mm. Applying 2 or more coats of approved matching shade and finish, melamine polish to the partitions including door openings/cutouts edges etc. as per sample approved complete.The rate shall include cost of required hardware, necessary transportaition, execution of work at all heights and locations including all lead, lift, wastage, statutory liabilities etc. complete. |
| 82 | Ply Panelling with Fin Veneer Finish |
| 83 | Providing & fixing in position full height 12mm BWR ply partitions finished with 4mm Veneer of wall fins approved dimensions and design Made out of 50mm x 50mm, 1.2 mm thick hollow aluminium square sections at spacing not exceeding 600 mm. Applying 2 or more coats of approved matching shade and finish, melamine polish to the partitions including door openings/cutouts edges etc. as per sample approved complete.The rate shall include cost of required hardware, necessary transportaition, execution of work at all heights and locations including all lead, lift, wastage, statutory liabilities etc. complete. |
| 84 | Ply Panelling with Laminate Finish |
| 85 | Providing full height partitions of height made of 50mm x 25mm x 1.2mm thick extruted Aluminium hollow section, placed not exceeding 600mm centre to centre bothways.The frame work to be cladded with 12mm thick BWR ply to aluminium frame work finished with 1.00 mm thick approved quality and shade laminate using approved adhesive in approved pattern & design including provifding grooves as per architectural drawing and as directed at site by Engineer-in-Charge |
| 86 | Ply Panelling with Poly marble sheet Finish |
| 87 | Providing and fixing wall panelling of required height, made of 50 × 25 × 1.2 mm thick extruded aluminium hollow sections, placed at maximum 600 mm c/c both ways, forming the framework. The framework shall be clad with 12 mm thick BWR plywood and finished with 3.0 mm thick approved quality Poly Marble sheet of approved make, colour and shade, fixed with approved adhesive in approved pattern/design, including grooves as per architectural drawings and as directed by the Engineer-in-Charge, complete in all respects. |
| 88 | Pre polished Teak Wood Beading |
| 89 | Supply, fabrication, and fixing 37mm pre polished wooden beading over surfaces, including cutting to size, fixing with adhesive and nails/screws, mitered joints at corners, finishing (as required), and all necessary tools and accessories. |
| 90 | 100 mm Gypsum Cornice |
| 91 | Providing and fixing 100 mm wide decorative gypsum cornice at the wall and ceiling junction, made of high-strength reinforced gypsum of approved profile, fixed with approved gypsum adhesive, SS screws and GI clips/brackets wherever required. The joints shall be finished smooth with gypsum filler and the surface finished with one coat of primer and two coats of premium acrylic emulsion paint of approved colour and shade. The rate shall include supply, cutting, mitred joints, fixing, finishing, painting, all materials, labour, scaffolding, tools, transportation, wastage and completion of the work in all respects as directed by the Engineer-in-Charge. |
| 92 | 3M self-adhesive film |
| 93 | Providing and laying 3M self-adhesive film/sticker over glass wall panelling/MDF board, in approved plain or frosted finish, including surface preparation, necessary line/pattern cut-outs and NABARD logo, complete with materials, labour and finishing as per approved design and Architect’s approval. |
| 94 | PLUMBING |
| 95 | Under Counter Washbasin |
| 96 | Providing and fixing Jaquar Continental Under Counter Wash Basin, Model CNS-WHT-701, size 485×370×205 mm, rectangular, vitreous china, white, complete with overflow cap, fixing clamps/screws, template, sealant and all accessories, labour and connections, complete. |
| 97 | Bottle Trap |
| 98 | Supply and fixing 32 mm heavy quality C.P. Brass Bottle Trap with cleaning eye, extension piece and wall flange including all necessary fittings etc. complete as per the Architectural drawings, as specified, as per the manufacturer's specifications and as per the directions of the Engineer-in-Charge. |
| 99 | Pillar Cock |
| 100 | Providing and fixing 15 mm C.P. Brass Pillar Cock of approved quality with aerator, 450 mm long SS flexible braided hose pipe (with Nipple, Nut, O-Ring) with gasket, installation kit, all other fittings and fixtures as per the manufacturer's specification etc. complete as per the directions of the Engineer-in-Charge. |
| 101 | Angle cock |
| 102 | Providing and fixing chromium plated brass angle cock, heavy-duty type, 15 mm nominal bore, of approved quality and make, conforming to relevant IS standards, including all necessary nuts, washers, wall flanges, connections and accessories, complete as per manufacture specifications and as directed by the Engineer-in-Charge. |
| 103 | Kitchen Sink |
| 104 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required, Kitchen Sink with Drain board.Sink with drain board 510x1040mm bowl depth 250mm |
| 105 | Sink Mixture tap |
| 106 | Providing and fixing sink mixer with swinging casted spout- Jaguar make Florentine collection cat. No.-FLR-5163 or equivalent approved by Engineer-In- charge |
| 107 | SOIL WASTE AND RAIN WATER PIPES |
| 108 | Supplying, fixing, testing and commissioning of PVC Soil, waste and rainwater pipes(SWR) conforming to IS:13592 /1990-TypeB fitting6kgwith rubber ring (conformingtoIS:5382) joints inclusive of all necessary specials like bends, tee, offsets, door bends, junctions, cowlsetc., laidunder floor /fixed onwalls and in pipe shaft with proper pipe support like brackets, hangers, MS grip bolt setc., complete. The support shall be painted with two coats ofenamel paint. |
| 109 | 50 mm dia - Including wall chasing works |
| 110 | 75 mm dia - Waste / balcony rain water |
| 111 | 110 mm dia - Soil & Urinal |
| 112 | Supplying, installing, testing and commissioning of PVC Multi floor trap adapter with 110mm X75mm dia conection., |
| 113 | Providingand fixing Heavy class S.S. grating with cockroach/mosquito proof S.S. strainer of Chilly or equivalentmake, asapproved, (inclcockroachtrap) including setting in floor with cement mortar to match with floor finish as per architect requirements |
| 114 | INTERNAL WATER SUPPLY SYSTEM |
| 115 | Providingand fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00m spacing. This includes jointingof pipes & fittings with one step CPVC solvent cementand the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. |
| 116 | 20 mm nominal outer dia Pipes |
| 117 | 25 mm nominal outer dia Pipes |
| 118 | 32 mm nominal outer dia Pipes |
| 119 | Supplying, installing and testing and commissioning of approved make PN16 class Gunmertal ball valves with necessary unions etc.,complete in all respect. |
| 120 | 32 mm dia |
| 121 | Providingand fixingsquare-mouthS.W. gully trap classSP-1complete withC.I.grating brick masonry chamber with water tight C.I.cover with frame of 300 x300mm size(inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design:180x150mm size P type with common burntclay bricks of class Designation 7.5 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender