Tender For Execution Of Work Under Upgradation Prcurement Of Heritage Assste. & N.E.C. To Development Of The Surronding Area And Boundary Wall With M.S Grill At Rock Cut Temple At (M.P.)
Tender Value
85.05 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
15 days left
EMD
2.12 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandsaur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Work Under Upgradation Prcurement Of Heritage Assste. & N.E.C. To Development Of The Surronding Area And Boundary Wall With M.S Grill At Rock Cut Temple At (M.P.)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass brush wood, trees and saplings of girth up to 30cm measured at a height of 1m. above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish with lead up to 50m and lift up to 1.5m, complete in all respects, in all kind of soil. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 3 | Dismantling M.S. welded wire mesh (jali) from existing frames/posts, including cutting, removing and stacking the dismantled material within a lead of 50meters, complete as per specification and direction of Engineer-in-charge. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 4 | Earth work in excavation by mechanical means / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out excavated soil and disposal of surplus excavated soil as directed within a lead of 50meters complete as per CPWD speficiations and direction of Engineer-in-charge. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 5 | Providing and laying plain cement concrete (PCC) 1:2:4 (1 cement, 2 coarse sand (Zone-III) derived from natural sources, 4 graded stone aggregate 20mm nominal size derived from natural sources), including mixing, laying compacting, finishing and curing, complete in all respects. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 6 | Providing random rubble masonry (RRM) with hard stone in foundation and plinth, including levelling up with cement mortar 1:6 (1 cement, 6 coarse sand), complete in all respects. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 7 | Providing and laying coursed rubble masonry (CRM) with hard stone (First sort) in superstructure above plinth level and up to floor five level laid in cement mortar 1:6 (1 cement, 6 coarse sand), including dressing of stones, laying in regular coursed with proper, materials tools and plants required to complete the work as per specifications and as directed by the Engineer-in-charge. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 8 | Providing, fabricating and fixing M.S. grill framing with 50x5mm M.S. flat all around and vertical members of 16x16mm M.S. square bars, 1.20m high, fixed at 100mm centre to centre spacing, including, drilling, hoisting, fixing in position, making all necessary joints, applying one coat of approved steel primer, and completing the work in all respects as directed by the Engineer-in-charge. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 9 | Providing and laying plain cement concrete (PCC) of mix coping on Top of wall 1:2:4 (1 cement, 2 coarse sand (Zone-III) derived from natural sources; 4 graded stone aggregate of 20mm nominal size derived from natural sources), including mixing, laying, compacting, vibrating, finishing and curing, complete in all respects as per specifications and as directed by the Engineer-in-charge. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture and required shade to give an even finish, including preparation of surface by cleaning, removing dust, grease, rust and other foreign materials, complete. The work shall include application of one coat of approved primer/under coat of suitable shade followed by two or more coats of synthetic enamel paint on new work, complete as per specifications and direction of Engineer-in-charge. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 11 | Providing and applying flush/ruled pointing on stone masonry with cement mortar 1:3 (1 cement, 3 fine sand), completing the work in all respects as per specifications and as directed by the Engineer-in-charge. . (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 12 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/ structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock systems with M. S. tubes, M..S. tube challis M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required if feasible for inspection of work at required locations with essential safety features for the workmen etc, complete as per directins and approval of Engineer-in-charge. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 13 | Providing and fixing M. S. double leaf gate fabricated with M. S. angel 50x50x6mm frame, 16x16mm M.S. square bars, M. S. flats/ bracing members, hinges, tower bolts, handles, locking arrangement etc, welded in built up sections including cutting, welding, hoisting, fixing in position and applying on coat of approved steel primer complete as per approved design and direction of Enginner-in-charge. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) |
| 14 | Providing and fixing 100mm dia, PVC pipe weep holes through masonry boundary wll at 2.00 m centre to centre spacing, including cutting/ making openings, fixing the pipe with outward slope of 1.20, sealing around the pipe with cement mortar and making good the masonry/plaster surface, complete in all respects as directed by the Engineer-in-charge. (This provision is inclusive of GST hence no GST Amount is to be quoted by the Bidder) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender