Tender For Widening And Strengthening Work On The Asut-Mirzapur-Mahul-Belwai Road (Mdr-158E) In Azamgarh District, From Chainage 4.000 To 11.800.(Including 5Year Maintenance Cost)
Tender Value
12.59 Crore
Estimated cost
Bid Submission
06 Nov 2026
9 days left
EMD
25.18 Lakhs
Bank guarantee accepted
Document Fee
5590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Azamgarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Widening And Strengthening Work On The Asut-Mirzapur-Mahul-Belwai Road (Mdr-158E) In Azamgarh District, From Chainage 4.000 To 11.800.(Including 5Year Maintenance Cost)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for road work in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading tipper triming bottom and side slop in accordance with requirement of lime, grade and cross section and transporting of the embankment loctiong within all lift and lead. as per MoRTH specification No. 301 (Including all taxes but excluding GST) |
| 2 | Construction of Embankment with Material deposited from Roadway Cutting:- Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2 As per MoRTH specification No. 305 (Including all taxes but excluding GST) |
| 3 | Construction of Embankment with Material obtained from road side without lead) :- Construction of embankment with approved materials obtained from borrowpits with all lifts and leads, transporting to site , speading grading to required slope and compating to meet requirement of table 300-2 (without lead) (Data Book Sr. No. 3.16) material obtained from right way (Without lead) As per MoRTH specification No. 305 (Including all taxes but excluding GST) |
| 4 | Construction of Embankment with Material obtained from Borrowpits :- Construction of embankment with approved materials obtained from borrowpits with all lifts and leads, transporting to site , speading grading to required slope and compating to meet requirement of table 300-2 from 1.00 Km. distance (Including all taxes but excluding GST) |
| 5 | G.S.B Grade-1Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density complete as per MoRTH specification No. 401 (Including all taxes but excluding GST) |
| 6 | Cement Treated Crushed Stone Base (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate mixed with 4% cement to crushed stone treated base specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per MoRTH specification No. 403 (Including all taxes but excluding GST) |
| 7 | Wet Mix Macadam (Plant Mix Method)Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As per MoRTH specification No. 406 (Including all taxes but excluding GST) |
| 8 | Prime CoatProviding and applying primer coat with bitumen emulsion slow setting on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per clause 502 of MoRTH specifications (Including all taxes but excluding GST) |
| 9 | Tack Coat 1st on Bituminous Surface Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @ 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. As per MoRTH specification No. 503 (Including all taxes but excluding GST) |
| 10 | Bituminous Concrete Grading-IIndProviding and laying bituminous concrete with HotMix HMP 60-80 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 (B) complete in all respects. Using Bitumen (Including all taxes but excluding GST) |
| 11 | Construction of subgrade and earthen shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement to Table 300-2 as per MoRTH specification No. 305 (without lead). (Including all taxes but excluding GST) |
| 12 | Construction of subgrade and earthen shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement to Table 300-2 (from 1 Km. distance) (Including all taxes but excluding GST) |
| 13 | Earth work in excavation Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material As per MoRTH specification No. 304 (Including all taxes but excluding GST) |
| 14 | PCC Grade M-15Plain cement concrete M15 in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and complacted by vibration including curing for 14 days. Foundation. As per MoRTH specification No. 2100 (Including all taxes but excluding GST) |
| 15 | RCC Grade M20RCC Grade M20 (Using Concrete Mixer) As per MoRTH specification No. 1500, 1600, 1700 (Including all taxes but excluding GST) |
| 16 | RCC Grade M-30Provinding and laying cement concrete M-30 grade excluding reinforcement complete as per drawing and techincal specifications No. 1500, 1600 & 1700 (Including all taxes but excluding GST) |
| 17 | HYSD BarSupplying, fitting and placing HYSD bar reinforecement in super-structure complete as per drawing and technical specifications. As per MoRTH specification No. 1600 (Including all taxes but excluding GST) |
| 18 | Providing and laying of R.C.C. Hume pipe NP-3 900 mm dia complete as per direction of engineer in charge (Including all taxes but excluding GST) |
| 19 | BRICK WORK 1:3Brick masonry work in 1 : 3 in substructure complete excluding pointing and plastering as per drawing and Technical Specifications No. 1300 & 2200 (Including all taxes but excluding GST) |
| 20 | Struck PointingStruck Pointing with cement mortar (1:3 ) on brick work in substructure as per technical specifications No. 1300 & 2200 (Including all taxes but excluding GST) |
| 21 | Providing and Laying ordinary Km stone |
| 22 | Providing and Laying ordinary 5th Km stone |
| 23 | Providing and Laying Hectometer stone |
| 24 | Maintenance of 1st year after completion of work @0% of total work amount of item 1 to 26 |
| 25 | Maintenance of 2nd year after completion of work @0.25% of total work amount of item 1 to 26 |
| 26 | Maintenance of 3rd year after completion of work @0.50% of total work amount of item 1 to 26 |
| 27 | Maintenance of 4th year after completion of work @0.75% of total work amount of item 1 to 26 |
| 28 | Maintenance of 5th year after completion of work @1.00% of total work amount of item 1 to 26 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender