Tender For Provn Of 15 X Security Lights With Pole In Otm Bldg And 02 X Urinal Block At 17 Czw 03 X Bathrooms For Single Jcos Near Bldg No P-22 To P-25, Ladies Toilet Near Bldg No T-5 Of Echs And Toilet Block For Or Living In Aro Narangi Under Ge Nar
Tender Value
32.67 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
15 days left
EMD
65358
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 15 X Security Lights With Pole In Otm Bldg And 02 X Urinal Block At 17 Czw 03 X Bathrooms For Single Jcos Near Bldg No P-22 To P-25, Ladies Toilet Near Bldg No T-5 Of Echs And Toilet Block For Or Living In Aro Narangi Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft / Loose etc complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed. |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out in soft / loose soil etc complete al as specified and as directed. |
| 4 | Spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required etc complete all as specified and as directed. [Notes : Earth reqd for filling under floor obtained from Item No. 01] |
| 5 | Removing excavated soil not exc 50.00 mtre and depositing where directed at a level not exc 1.5 mtr above the starting point etc complete all as specified and as directed. |
| 6 | Matrial and Labour for Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surfac etc all as specified and as directed. |
| 7 | Matrial and Labour for plain cement concrete (1:4:8) type D-2, with using 40 mm graded stone aggregates as in foundations and mass concrete etc complete all as specified and as directed. |
| 8 | Matrial and Labour for cement concrete (1:3:6) type C-2 (using 20mm graded aggregate) as in hold fast of chowkat etc complete all as specified and as directed. |
| 9 | Matrial and Labour for cement concrete (1:2:4) type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 10 | Matrial and Labour for providing plain cement concrete (1:2:4) type B-0 with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 11 | Matrial and Labour for Pre-cast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes / drain cover etc) and similar work including necessary form work and set in CM (1:6) etc complete all as specified and directed. |
| 12 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. |
| 13 | Matrial and Labour Reinforced cement concrete (Nominal mix) Type B-1 (1:2:4) with using 20 mm graded stone aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 14 | Matrial and Labour Reinforced cement concrete (Nominal mix) Type B-1 (1:2:4) with using 20 mm graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. |
| 15 | Supply only Liquid water proofing compound. |
| 16 | Matrial and Labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and as directed. |
| 17 | Matrial and Labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) etc complete all as specified and as directed. |
| 18 | Matrial and Labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc complete all as specified and as directed. |
| 19 | Matrial and Labour for Damp proof course 40 mm thick in cement concrete (1:2:4) type B-0 to horizontal or vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m etc complete all as specified and as directed. |
| 20 | Matrial and Labour for 18 to 20 mm thick (Z Black) Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl grinding the edges half round incl polishing etc complete all as specified and as directed. |
| 21 | Matrial and Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to etc complete all as specified and as directed. |
| 22 | Matrial and Labour for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with rough finished etc complete all as specified and as directed. |
| 23 | Supply and fix Steel windows with side hung shuters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded completed all as specified and as directed. |
| 24 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 25 | Supply and fixing factory made uPVC coloured Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) [Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made] |
| 26 | Supply and fix door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed. |
| 27 | Supply and fix for solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integrar skin with suitable metal stiftner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed(Note: Door frame shall be water proof, Termite proof, elegant and should have excellent screws holding strength to fix hinges and holds the doors property for a long life) |
| 28 | Supply and fix factory made solid PVC moulded door shutter with wood tree EPS, 28 to 30mm thick (tiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc complete all as specified and as directed. |
| 29 | Supply and fix Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed. |
| 30 | Supply and fix 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed. |
| 31 | Supply and fix butt hinges of 75 mm size, medium weight, cold rolled mild steel and fixed etc complete all as specified and as directed. |
| 32 | Supply and fix 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed. |
| 33 | Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple etc complete all as secified and as directed. |
| 34 | Matrial and Labour for framed work as in grills, grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters walks ways, railing framed work of water tanks and similar work etc complete all as specified and as directed. |
| 35 | Matrial and Labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W (Gde E- 250) quality A etc complete all as specified and as directed. |
| 36 | Supply and fix Steel work as in tubular trusses as in col, rafters, purlins etc. complete using ERW or induction butt welded tubes etc complete all as specified and as directed. |
| 37 | Matrial and Labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed. |
| 38 | All as per item No 37 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed. |
| 39 | Supply and fix Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 40 | Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 41 | Supply and fix 7 to 8 mm hollow profile thickness thick PVC Coloured Sheet (any Shape, coloured, pattern as approved ) suitably placed in false ceiling/Walls incl making sunken side corner, design as directed etc incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE) |
| 42 | Supply and fix 9mm Aluminium composite panel, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work and facia etc omplete all as specified and as directed. |
| 43 | Matrial and Labour for 75 mm thick PCC (1:3:6), type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 44 | Matrial and Labour for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed. |
| 45 | Matrial and Labour for cement concrete type B-0 (1:2:4) (12.5mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed. |
| 46 | Matrial and Labour for Rendering 10 mm thick in CM (1:4) for backing coat of tiles / dado etc complete all as specified and as directed. |
| 47 | Matrial and Labour for Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes etc complete all as specified and as directed. |
| 48 | Matrial and Labour Glazed ceramic tiles (Coloured) as in vertical surface 600X1200mmX7 to 9 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed. |
| 49 | M & L for Non - skid joint free matt finished ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 50 | Matrial and Labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished and smooth without using extra cement etc complete all as specified and as directed. |
| 51 | Matrial and Labour for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 52 | Matrial and Labour for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface mixed with water proofing compound where ever is reqd as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately |
| 53 | Supply and fix 18/19mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, Kitchen shelves and modular kitchen shutter, shelves, drawers etc over 0.90 mm thick decorative laminate type 1, of surface finish (both side of shutter), colour and pattern as approved, fixed with approved adhesive as per maker's instructions etc complete all as specified and as directed. |
| 54 | Supply and fix Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified. |
| 55 | Supply and fix 200 mm size powder coated Stainless steel handle fit to modular section etc complete all as specified and as directed. |
| 56 | Matrial and Labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed. |
| 57 | Matrial and Labour for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 58 | Matrial and Labour for preparation Newly plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed. |
| 59 | Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed. |
| 60 | Matrial and Labour for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 61 | Supply and fix vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. |
| 62 | Supply and fix Oval shpaped vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 63 | Supply and fix Viterous China urinals, Full Stall stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 32 mm dia bore 600 mm long LDPE incl 32mm dia bore waste coupling etc complete all as specified and as directed. |
| 64 | Supply and fix Oval shpaped vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste Coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 65 | Supply and fix PVC deo flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc 15 mm dai bore PVC connection 450 mm long complete all as specified and as directed. |
| 66 | Supply and fix 15 mm pillar taps tall body chromium plated cast copper alloy fancy type complete all as specified and as directed. |
| 67 | Supply and fix in repairs 15 mm dia bore Brass Brass CP mixer (Wall, Sink and Basin mixer) for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 68 | Supply and fix overhead round rain shower 8\\" Iwith out armns) of 15 mm bore dia etc complete all as specified and as directed. |
| 69 | Supply and fix 15 mm Centre hole Basin mixture W/o Pop Up all as specified and as directed. |
| 70 | Supply and fix 15 mm dia bore Bib Cock long body with wall falnges of Cat Part No - P-6808 of Marco series of Prayag incl fixing etc complete all as specified and as directed. |
| 71 | Supply and fix 15 mm dia bore CP fancy type long body Angular stoop cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of Cat Part No - P-6808 of Marco series of Prayag etc complete all as specified and as directed. |
| 72 | Supply and fix Bib Cock 2 way double handle with CP flange fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc of Cat Part No - P-6812 of Marco series of Prayag etc complete all as specified and as directed. |
| 73 | Supply and fix in bevelled edge looking mirror 7 to 8 mm thick area exc 1.0 sqm but not exc 1.50 sqm mirror of selected quality glass fixed with 4 nos of Studs incl polishing the edges etc complete all as specified and as directed. |
| 74 | Supply and fix 15 mm dia bore Brass health faucet with 1.00 mtr tube & hookd incl fixing etc of Cat Part No -CPHF-6 of Prayag etc complete all as specified and as directed. |
| 75 | Supply and fix Jet Spreay SS-20 (Butterfly) with 1.0 mtr tube incl fittings of Cat Part No -CPJ-5 of Prayag etc complete all as specified and as directed. |
| 76 | Supply and fixCorner Glass Shelf (with brass bracket Bracket) of 200mm long of Cat Part No - DAP-29 of prayag series incl fixing etc complete all as specified and as directed. |
| 77 | Supply and fix Glass Shelf 300mm Long of Cat Part No - CPA-32 of Prayag Series series incl fixing etc complete all as specified and as directed. |
| 78 | Supply and fix ABS soap dish with brass stand of Cat Part No -CAP-4 of Parayag series incl fixing etc complete all as specified and as directed. |
| 79 | Supply and fix Stainless Steel Towel Rail Cubix of Cat Part No - CPA-46 of Prayag series incl fixing etc complete all as specified and as directed. |
| 80 | Supply and fix Brass Towel ring with Round Flange of Cat Part No - CPA-2 of Prayag Jaquar series incl fixing etc complete all as specified and as directed. |
| 81 | Supply and fix GI Tubes, 15 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 82 | Supply and fix GI Tubes, 20 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 83 | Supply and fix rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed. |
| 84 | Supply and fix 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 85 | Supply and fix 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed. |
| 86 | Supply and fix 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed. |
| 87 | Supply and fix 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed. |
| 88 | Supply and fix 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed. |
| 89 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed. |
| 90 | Supply and fix PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed. |
| 91 | Supply and fix 110 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed. |
| 92 | Supply and fix 75 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed. |
| 93 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed. |
| 94 | Matrial and Labour for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 95 | Matrial and Labour for laying of 150mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed. |
| 96 | Matrial and Labour Polyethylene Septic Tank of 5 user, Black Colour, Diameter of pipe 850mm, length 2000, wall thickness 10mm, no of chamber 03 nos , no of maholes 0-2 nos, size of manhole 300mm dia with 110mm dia int let and out let pipe with Provn of Air Vent pipe incl fixing arrangement etc complete all as specified and as directed Notes : Excn, PCC RFR and Removal shall be measured and paid sepaterly under relevant items |
| 97 | Matrial and Labour Soakage wells excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20x1.5 mtr dia etc complete all as specified and as directed. |
| 98 | Matrial and Labour Polyethylene Septic Tank of 15 user, Black Colour, Diameter of pipe 1000mm, length 2800, wall thickness 10mm, no of chamber 03 nos , no of maholes 0-2 nos, size of manhole 550mm dia with 110mm dia int let and out let pipe with Provn of Air Vent pipe incl fixing arrangement etc complete all as specified and as directed Notes : Excn, PCC RFR and Removal shall be measured and paid sepaterly under relevant items |
| 99 | Matrial and Labour Soakage wells excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80x3.00 mtr dia etc complete all as specified and as directed. |
| 100 | Matrial and Labour for sand cushining / sand covering for under ground cable protection and consolidated and compacted with clean dry sand complete all as specified and directed. |
| 101 | Matrial and Labour for Sub class ‘B’ old size well burnt brick laid flate in trenches over the cable for protection of LT cable complete all as specified and as directed. |
| 102 | Matrial and Labour for PCC (1:3:6) type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in mass concrete including necessary form work for coping to the new/existing Steel Poles complete all as specified and directed. |
| 103 | M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 4 core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 104 | Material and labour for erection of steel tubular steel tubular swaged pole type 410 SP - 31 (9.00 metres long) including cast iron base plate, finial taper plug and and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 105 | Supply and fixing in replacement of high-quality LED street Light with a minimum system lumen of 12600 Lm (+/-5%) and system wattage not exceeding 90W (+/- 5%) with a nominal system efficacy of ≥140 lumen/watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI≥70. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminium, to withstand extreme environments. The name of the brand should be embossed/engraved and should not be mentioned using sticker/screen printing. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be a minimum IP66 and impact resistance shall be IK10. The Luminaire should have a minimum 10KV/10KA SPD duly bolted in the Luminaire. The luminaire should be of Class B Serviceability. The Driver should be asphalt potted and should be a BIS approved driver. The driver shall have operating voltage of 120V to 270V, PF≥0.95 @ full load, THD≤10% @ full load. The driver should be capable to withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. The luminaire driver, it’s SPD shall be of the same make/manufacturer as that of LED luminaires complete all as specifed and directed. |
| 106 | Matrial and Labour for connection of junction box to street light luminaire using wiring with two runs (P-N) of single core 1.5 Sqmm (nominal area) FR PVC insulated and unsheathed multi-stranded copper conductor cable 1100 volts grade and one run of FR PVC insulated and unsheathed multi-stranded copper conductor of size 1.5sqmm single core as earth continuity wire drawn through PVC conduit(Heavy grade) and tiding the same by aluminium strip with the pole complete all as specified and directed. (Note : Two single core 1.5 Sqmm cable and one single core 1.5 Sqmm earth conductor cable and one run of PVC conduit shall be measured as one run) |
| 107 | Supply and fix CPRI approved street light panel of suitable dimension outdoor type, powder coated,dust and vermin proof IP-55,prewired , operates on three phase made with 1.6mm thick CRCA sheet with locking arrangement duly painted. having auto/manual selector switch, including MS flat iron clamp (Clamp shall be 40X 5mm ), nuts bolts & washers for fixing arrangement with pole and connecting incoming/outgoing cable with suitable size of lugs and comprising the following.(i) MCB , Four Pole of capacity 32 Amps ,C-curve of breaking capacity 10kA-2 Nos ( one for I/C and another for O/G)(ii) Astronomical timer(Astro mini ) 110-240VAC, 1 Phase . Cat Part No. T2DDT7 of L&T or equivalent in Havells/C &S (iii) 3 Pole power contactor of Current rating MNX 45 Amps , with inbuilt surge suppressor and RoHS compliant. (iv) LED type red indicator lamp (v) Auto/ Manual selector switch(vi)2A, SP, 10kA MCB- 01 Nos (For timer protection) |
| 108 | M& L for Manual boring under roads/hard standing by reqd T&P without disturbing the top surface of the road for throughing the cable in GI Pipe of n exc 80 mm dia all as specified and directed. |
| 109 | Matrial and Labour for GI pipe light grade 40mm bore dia with all fittings to be laid in trenches or in floors,including taking down rusted one complete all as specified and as directed. |
| 110 | Supply and fixing of street light bracket made of GI pipe 40 mm bore light grade(bend to shape) , 2 metre long and fixed with Ms flat iron clamp(clamp shall be 40 X 5mm), nuts, bolts and washers on pole complete all as specified and directed. |
| 111 | Supply and fix street light junction box of size 205 x 255 x 112mm made of high quality polycarbonate with IP-66 protection (Dust and vermin proof according to IEC-60529) Totally insulated made of halogen and silica free recyclable material having high quality gasket made out of polyurethane with MCB, DP, 10KA, 6 Amps to be fixed on Din rail , with locking arrangement with cable gland suitable upto 25 to 35 sqmm cable and necessary fixing arrangements such as clamps, nuts, bolts etc all as specified & directed by Engr-in-Charge. Make : Hensel Cat No -KF-1616B. |
| 112 | Matrial and Labour in repair earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6 mm thick burried directly in ground (Earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvanised earth lead by means of bolts nuts, check nuts and washers of galvanised iron or steel using GI strips 32 X 6mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earth test point all as specified or indicated including GI pipe 40mm bore(dia) for earth lead protection ' light grade', GI pipe 20mm Bore(dia) ' Medium grade' for watering including necessary excavation any type of soil, RCC chamber cover plate, wire mess, funnel, etc complete and testing on completion. |
| 113 | Matrial and Labour Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surface for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed. |
| 114 | All as per item serial No 113 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches. |
| 115 | Supply and fix switch modular type 6 Amp 240 Volts single one way (ISI marked). |
| 116 | Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 117 | Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as directed. |
| 118 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 119 | Supply and fixing in repair LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 120 | Supply and fix in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 121 | Supply & fix MCB DB of sheet metal enclosure double door SPN 4 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed. |
| 122 | Supply and fix MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) |
| 123 | Supply and fix in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) |
| 124 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 125 | Supply and fix in repair/replacement LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed. |
| 126 | Matrial and Labour for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 127 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009. |
| 128 | Supply and fix steel tubes medium grade galvanised 20 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as directed. |
| 129 | Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed. |
| 130 | Cutting existing steel tubing of 40mm for alterations or additions (Each cut measured) complete all as directed by engineer-in-charge. |
| 131 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified. Please Enable Macros to View BoQ information |
| 132 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender