Tender For Special Repair To Bldg No T-10 At D Zone And Provn Of Sewage Disposal System At Near Bldg No P-605 Of A Sector At Rms.
Tender Value
41 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
18 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wokha → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No T-10 At D Zone And Provn Of Sewage Disposal System At Near Bldg No P-605 Of A Sector At Rms.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Taking down chowkhat or frames not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed. |
| 3 | Taking down chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutter from the frame) complete all as specifed and directed. |
| 4 | Taking down shutter not exceeding 1 Sqm each complete all as specifed and directed. |
| 5 | Taking down shutter of any description exceeding 1.0 Sqm not exceeding 2Sqm each complete all as specifed and directed. |
| 6 | Dismantling of chicken wire lathing complete all as specified and as directed. |
| 7 | M&L for PCC 1:4:8 Type D-2(using 40mm graded stone aggregate) 75 mm thick as in sub base finished even and rough complete all as specified and as directed. |
| 8 | M&L PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) 25mm thick as in sub base of flooring finished even and fair using extra cement complete all as specified and as directed. |
| 9 | M&L for PCC (1:4:8) type D-2, 100 mm thick (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 10 | M&L for coloured non skid ceramic tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm screed bed or bedding layer in cement mortar 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 11 | M&L coloured non skid ceramic tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick backing coat in cement mortar 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 12 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade od tiles laid over and including 15mm screed bed or bedding layer in cement mortar 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 13 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10mm thick cement mortar (1:4) backing coat including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | M & L for chequered cement concrete tiles of size not less than 300x300x25mm thick any description jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including 20mm thick screed bed or bedding layer of cement mortar CM (1:4) for laying floor finishes complete all as specified and as directed. |
| 15 | S & F in repairs Pre-painted galvatume aluminum zinc coating GI based trapezoidal corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 16 | S & F in repairs Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 17 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A including dismantling of old one from its position all as specified and as diretced. |
| 18 | S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality-A all as specified and as diretced. |
| 19 | S&F steel work in tubular trusses, post, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified and as directed. |
| 20 | S&F MS screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nuts, length of bolt exceeding 10cm and not exceeding 15 cm long dia of neck 11 to 15 mm complete all as specified and as directed. |
| 21 | M&L for 2nd class hard wood scantling as in framed work etc clean sawn including dismantling of old from its place complete all as specified and directed. |
| 22 | All as per item 21.00 above but except timber complete all as specified and directed. |
| 23 | S & F in repairs 4 mm thick of size 600x600mm HPSC (High Pressure Steam Cured) pre-painted self embossed, textured designer board E-Board Classic to be fixed or laid with GI frame grid/section size 600mm x 600mm with main runner 38x24x0.9 mm thick, cross tee 8.6x24x0.9mm and wall angle 19 x19x0.9mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and as directed. |
| 24 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 25 | M&L in repairs for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed. |
| 26 | S&F in repairs for 4 mm thick veneered decorative Plywood (no of ply 05), grade-I (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work complete all as specified and directed. |
| 27 | S&F in repairs 25mm thick and 200 mm width second class hard wood boarding , plained one side with butt joints as in eaves boards complete all as specified and directed. |
| 28 | M&L for 75 mm thick PCC 1:3:6 type C-2 , using 40 mm graded stone aggregates as in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed |
| 29 | M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed. |
| 30 | S&F factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed. Please Enable Macros to View BoQ information |
| 31 | S&F factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender