Tender For Repair/ Maintenance Of Lt Distribution System And Other Allied Misc Connected Works For Pocket ‘A At Jasai Mil Stn Under Ge (A) Barmer
Tender Value
30 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
14 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Lt Distribution System And Other Allied Misc Connected Works For Pocket ‘A At Jasai Mil Stn Under Ge (A) Barmer
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of depriciated cross arms (Clamp, nut bolts )/ channels/ supports etc care fully from site and setting aside for reuse or for taking credit all as specified and directed. |
| 2 | Material and labour for steel structure, cross arms, bracing supports ,clamps, back plates febricated from structrual steel sections incl. nuts, bolts, washers, welding ,bending cold or hot drilling holes for bolts in any size and shape all as directed Including one primer coat, one under coat and one finishing coat of synthetic enamel steel paints incl preparation of surface all as directed. |
| 3 | Dismantling of ACSR conductor of any type and size from existing PCC/Steel poles at various locations all as directed by Engr - in - charge at site. |
| 4 | Material and labour in replacement of ACSR conductor straightening properly on insulators and binding with aluminum taps /binding wire /conductor jumper etc complete all as directed by Engr- In- Charge. |
| 5 | Dismantling of insulators of any size/type from existing PCC/Steel poles all as directed by Engr - in - charge at site. |
| 6 | Supply and fix pin type porcelain insulator, vitreous brown insulator including one galvanised mild steel spindle with two GI washer and one GI Nuts 100 mm height 65 mm dia for 1100 volts grade incl taking down old unsv insulator from PCC/Steel pole complete all as specified and directed by Engr-in-Charge. . |
| 7 | Supply and fix shackle type porcelain vitreous Brown insulator 1100 volt grade 75 mm in height and 90 mm dia including galvanised mild steel strap of size 31mm x 3mm , 12 mm dia insulators bolts, washers and nuts complete all as specified. |
| 8 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m depth for taking out, laying of cables etc and getting out in soft/loose soil incl connected items complete all as specified and directed by Engr-in-Charge. |
| 9 | Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth (soil) all as specified and directed by Engr-in-Charge. |
| 10 | Removing excavated material (soil) to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed by Engr-in-Charge. |
| 11 | Supply and spreading clean dry (Tibba) Sand including watering and consolidation in trenches for cushioning/cable protection all as specified and directed by Engr-in-Charge. Note : Punned thickness shall be measured and paid |
| 12 | Supply and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables in trenches for cable protection of U/G cables with width equal to length of bricks complete all as specified and directed |
| 13 | M&L for PCC (1:2:4) type B1, using (20mm graded stone aggregate) for coping of poles including necessary form work etc complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for providing PCC 1:3:6 type C2, Using 40mm graded aggregate for Cement concrete in foundations, filling and mass concrete including necessary form work etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 15 | M&L for providing PCC 1:3:6 type C2, Using 40mm graded aggregate for Cement concrete in foundations, filling and mass concrete including necessary form work etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender