Tender For special Repair To Roof Treatment Of Otm Bldg No T-29,P-25,P-43,T-23 & P-75 Of Sikh Regt And Provn Of 01Xtoilet Block At Jcos Mess Of Fd Regt At Dipatoli Under Ge Dipatoli
Tender Value
43.95 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
15 days left
EMD
87900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Roof Treatment Of Otm Bldg No T-29,P-25,P-43,T-23 & P-75 Of Sikh Regt And Provn Of 01Xtoilet Block At Jcos Mess Of Fd Regt At Dipatoli Under Ge Dipatoli
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down steel tubing and connection of 15 mm bore complete all as directed at site |
| 2 | S&F steel tubing for 15 mm bore medium grade and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc complete all as directed at site all as specified & directed |
| 3 | All as per item No 3 here in before but for refixing only with new fittings . |
| 4 | Taking up or down steel tubing and connection of 20 mm bore complete all as directed at site |
| 5 | S&F steel tubing for 20 mm bore medium grade and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc complete all as directed at site all as specified & directed |
| 6 | All as per item No 5 here in before but for refixing only with new fittings. |
| 7 | M&L for roof treatment over in-accissible roofs by complete removal of existing old treatment and treated with following specifications:(a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab.(b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC (as per manufacturer instruction) on roof slab.(c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface.(d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction.(e) Applying two coat of aluminium paint over bituminous surface of membrane. complete all as specified and directedNote:- WPC all be Paid Separately under relevant item. |
| 8 | Supply only integral water proofing compound.ISI Marked |
| 9 | M&L for repair and rendering 10mm thick in CM 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed. |
| 10 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on wall of any height of bldigs all as specified and directed. |
| 11 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately |
| 12 | M&L for cleaning and removing all scale and dirt etc, from 1000 ltr tanks and from mouths of circulating pipes etc,complete all as specified and directed. |
| 13 | S & F in repair 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms). Complete all as specified & directed |
| 14 | Dismantling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed. |
| 15 | Surface dressing in soft loose soil n exc 15 cm deep and getting out. Complete all as directed |
| 16 | Excavating in trenches n.exe. 1.5 m width and n.exe. 1.5 m in depth for foundation in soft/loose soil & getting out. Complete all as directed |
| 17 | Returning filling in , including spreading ,levelling watering & well ramming in layers not exc 25 cm. Complete all as directed |
| 18 | Removing excavated material n exc 50 m & depositing where directed at a level n exc 1.5 m.Complete all as directed |
| 19 | M&L for cement concrete with PCC type D2 1:4:8 using 40mm graded stone aggregate as in foundation. Complete all as specified & directed |
| 20 | M&L for M25 RCC design mix using 20 mm graded stone aggrete for raft foundation footing ,bases of columns, plinth beams & mass concrete. |
| 21 | M&L for M25 RCC design mix using 20 mm graded stone aggrete for columns, pillars,posts and struts. |
| 22 | M&L for M25 RCC design mix using 20 mm graded stone aggrete for beams, cantilevers, lintels over 1.5 m span. |
| 23 | M&L for M25 RCC design mix using 20 mm graded stone aggrete for slabs supported on walls/ beams and coloumns in floors roofs, landing and the like. |
| 24 | M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete. |
| 25 | M&L for mild steel TMT bar 5 mm dia and over upto and including 10mm dia in strrups as in including cutting, bending and binding with mild steel not less than 0.9 mm dia (annealed) all as directed complete. |
| 26 | Form work for foundation footing , bases of columns &plinth beams similar work vertical or batter. |
| 27 | Form work for side of pillars, posts, columns & similar works vertical or batter. |
| 28 | Form work to side & soffits of floor or roof beams lintels & similar works. |
| 29 | Form work to side & soffits of suspended roof slab or similar works not exceeding 200 mm thick. Flat Rough finished surface of concrete. |
| 30 | M&L for brick work with burnt old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius and all as directed. |
| 31 | M&L for brick work with burnt old size bricks built in cement mortar 1:4 straight or curved on plan to any radius in half brick thick walls complete all as specified & directed. |
| 32 | M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) mixed with WPC ( WPC shall be measured & paid separately) |
| 33 | M&L for rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth. all as specified & directed |
| 34 | M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement all as specified & directed |
| 35 | Supply only integral water proofing compound.ISI Marked |
| 36 | M&L for rendering 5mm thick on concrete Surfaces in cement mortar 1:3 finished even and smooth on ceiling. all as specified & directed |
| 37 | M&L for 75 mm thick pcc 1:3:6 type C2 using 40mm graded stone aggregate as in plinth course as directed by engineer in charge.all as specified & directed |
| 38 | M&L for sand filling under floors or in foundations including watering and conosoldiation.all as directed |
| 39 | M&L for broken stone or boulders of hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface. Complete all as specified & directed |
| 40 | M&L for 75mm thick PCC type D2 1:4:8 using (40mm gradded stone aggregate) as in sub base. |
| 41 | M&L for non skid ceramic colour tiles 7 to 8 mm thick area each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in net cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM 1:6 . complete all as specified & directed |
| 42 | M&L for Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl rendering 10 mm thick in CM 1:4. complete all as specified & directed. |
| 43 | M&L for 20 mm thick screed bed or bedding layer of cement mortar (1:4) for laying floor finishes . Complete all as specified & directed |
| 44 | M&L for cement concrete prepolished chequered 30 cm x 30 cm & 25 mm thick set and jointed & pointed in neat cement slurry with grey cement and pigment in floors complete all as specified & directed. |
| 45 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification & as directed. |
| 46 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed. |
| 47 | S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including 4mm thick glass/ss wire mesh necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed |
| 48 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section. ISI marked |
| 49 | S&F aluminium alloy 200mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed. |
| 50 | S&F 100mm MS butt hinges medium weight. All as specified & directed |
| 51 | S&F aluminium handle cast type anodised 150mm size. Completed all as specified & directed |
| 52 | S&F 15mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor .completed all as specified & directed |
| 53 | All as per item No 52 here in before but 20mm bore |
| 54 | S&F 20 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed. Complete all as specified & directed |
| 55 | S&F Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positiion complete in all respect as specified & directed |
| 56 | S&F 15mm bore bib tap cast copper alloy fancy type cromium plate with crutch or butter fly handdle screwed down for iron pipe but fancy type. Complete all as specified & directed |
| 57 | S&F 15mm bore stop cock/angle cock cast copper alloy screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete all as specified & directed |
| 58 | S&F PVC connector 600mm long with brass coupling in both ends screwed down for iron pipe. Complete all as specified & directed |
| 59 | S&F10 litre capacity PVC type low level flushing cistern with inlet ball valve, float and handle/push flush type brackets etc complete all as specified & directed |
| 60 | S&F Vitreous China squatting pan \\"Orissa\\" patern size 630x450mm white with integral foot rest (Excluding flushing cistern & flush pipe) all as specified & directed |
| 61 | S&F 15mm bore pillar tap fancy type castcopper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe etc complete all as specified & directed |
| 62 | S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified & directed |
| 63 | S&F vitreous china wash basin white, flat back, size 550x400mm excluding taps , waste ,but including barkets.all as specified & directed |
| 64 | S &F Vitreous china urinals, bowl typeflat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws. all as specified & directed |
| 65 | S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (miniumum weight 60 gms) all as specified & directed |
| 66 | S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 45 gms) all as specified & directed |
| 67 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromimum plated brass screws and cup washers. all as specified & directed |
| 68 | S&F 100mm dia PTMT grating.all as specified & directed |
| 69 | S&F 75 mm thick PVC (SWR pipes single socketed in any length with rubber ring joints laid in trenches or floors.all as specified & directed |
| 70 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls.all as specified & directed |
| 71 | S & F 110 mm bore PVC (SWR) bends of any radius.all as specified & directed |
| 72 | S & F 110 mm bore PVC (SWR) Vent Cowl. all as specified & directed |
| 73 | Hoisting & fixing 500 litres Rotational moulded polythylene water stroage tanks (cylindrical vertical with closed top) hoisted & fixed in position all position all as specified in SSR part -I incl all necessary fittings.all as specified & directed |
| 74 | S&F 20 mm dia ball valves, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms) complete, screwed for iron pipes or brasas ferrule and fixed. all as specified & directed |
| 75 | M&L for three coat of white wash on wall surface including preparation of surface.all as specified & directed |
| 76 | M&L for two coats of cement base paint over a coat of primer on newly wall surface including preparation of surface.all as specified & directed |
| 77 | M&L for two coats of white wash on ceiling surface including preparation of surface.. |
| 78 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size not less than 25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box and suitable size modular plate for fitting switch, socket etc complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 79 | (a) One light point controlled by one, one way switch 5 Amps |
| 80 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 81 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 82 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 83 | All as per item No 2 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 84 | S & F for modular Switch flush type single pole 5/6 amp, one way single module 230 Volts complete all as specified and directed at site. |
| 85 | S & F for modular Switch flush type single pole 15/16 amp, 230 Volts complete all as specified and directed at site. |
| 86 | S & F for modular socket outlet 2/3 pin, 5/6 Amp (2 module) 230 Volts complete all as specified and directed at site. |
| 87 | S & F for modular socket outlet 2/3 pin, 06/16 Amp (2 module) 230 Volts complete all as specified and directed at site. |
| 88 | S & F for Ceiling rose, surface Bakelite with 3 terminals PVC ISI marked for batten fitting complete all as specified & directed |
| 89 | S & F wall mounted Industrial grade LED tube light fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high tranmissitvity diffuser, luminous efficacy not less than 120 lumen/watt,THD <10% , Glare Free, natural white, power factor greater than 0.95, Color Temp 6500K(Cool white), CRI 80, In-built surge protection of 4 KVA, 230 volts complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 mm from ceiling rose to fitting complete all as specified and as directed. |
| 90 | S & F for Industrial grade Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP66 & IK07 for security light fitting luminaire (120 lm/watt), with toughened glass, CRI>80, Power Factor >0.95 with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 91 | S & F for energy efficient exhaust fan Copper winding of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection & body earth connection with ceiling rose and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. |
| 92 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with push/slide locking system including filling any blank slot with blanking plates & necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 93 | S & F MCB SPN 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 94 | S & F MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 95 | Supply & Laying ,connecting, testing and commissioning of XLPE LT UG cable of size 10 sqmm 2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as specified & directed. |
| 96 | Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified & directed |
| 97 | Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified. |
| 98 | Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick all as specified & directed |
| 99 | Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement all as specified & directed |
| 100 | Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed |
| 101 | S& F GI pipe light grade 40 mm dia of for cable connection with all fitting and fixed complete to walls andceilings or laid in floors/wall complete all as specified and directed by Engineer-in-Charge. |
| 102 | M&L for GI electrode chemical earthing, pipe in pipe technology of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit to achive earth resistance value less than or equal to 3 Ohm & EN voltage < 02 V,pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and primary conductor is inserted into secondray conductor having 80 MM dia. The primary conductor is inserted into secondory conductor and space between secondary and primary conductor of earthing electrode should becrystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel, and total depth should not less than 3.50 meters. Around the earth electrode earth pit borehole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC Contains mixture of Silica sulphate,Alumina, Iron Oxide, titanium Oxide, Calcium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 Cl chamber cover all as directed by Engineer-in-Charge.( Note : If less than 3 Ohm result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.) S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender