Tender For Provn Of Parking Sheds For Arff Vehicles Near Atc Bldg At 46 Wg Under Ge (Af) Nal
Tender Value
35.94 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
0 days left
EMD
72000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Parking Sheds For Arff Vehicles Near Atc Bldg At 46 Wg Under Ge (Af) Nal
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note :- All demolished material / debries will be disposed off out side the Air force station Nal with out any extra cost to the govt. Contractor should arrange dumping site to dispose off material. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable, pipe, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but not exceeding 3.00m in depth ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 4 | Traeting the top surface of filled earth at the rate of 5 ltrs of emulsion per Sqm of surface complete all as specified and directed. |
| 5 | M & L Cement concrete in foundations, filling and mass concrete Type 2, 1 : 3 : 6 (using 40 mm graded agg) complete all as specified and directed. |
| 6 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat & rough finished surfaces of concrete complete all as specified and directed. |
| 7 | M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 8 | M & L for Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 9 | M&L for RCC M-25 (Design Mix), in foundations, including rafts, footings, foundation beams. Plinth beams, bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 10 | Returning, filling in including spreding levelling watering in hard and dense soil complete all as specified and directed. |
| 11 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surface complete all as specified and directed. |
| 12 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square or rectangular for rough finished surface complete all as specified and directed. |
| 13 | M&L for RCC M-25 (Design Mix), Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 14 | M&L for RCC M-25 (Design Mix), in pillars, posts, struts, piers, columns etc complete all as specified and directed. |
| 15 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) for rough finished surface complete all as specified and directed. |
| 16 | M & L for RCC M -25 (Design Mix) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed. |
| 17 | M & L for Brickwork in CM 1:6 with old size burnt bricks, straight or curved on plan exc 6 m mean radius, built in complete all as specified and directed. |
| 18 | M&L for preparing Priming surfaces and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surface and laid APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 19 | Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished the surfaces even and smooth without using extra cement with using 3% water proofing (By weight of cement) or as specified by manufacturer (WPC measured and paid separatley) complete all as specified and directed. |
| 20 | Supply only integarl water proofing compound complete all as specified and directed. |
| 21 | M & L for rendering 15mm thick in two layers, on fair faces of brick work or concrete surfaces first layer 10mm with CM 1:6 and second layer 5mm with CM 1:4 finished the surfaces even and smooth without using extra cement with using 3% water proofing compound (By weight of cement) on 5mm thick layer or as specified by manufacturer (WPC used for top layer of 5mm thick measured and paid separatley) complete all as specified and directed. |
| 22 | M & L for rendering 10mm thickon fair faces of brick work or concrete surfaces with CM 1:6 finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 23 | M & L for rendering 5mm thick on fair faces of brick work or concrete of ceiling surfaces with CM 1:3 finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade/camouflage pattern (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepartion of surface complete all as specified and directed. |
| 25 | M & L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed. |
| 26 | M&L for preparation of new plaster or concrete surface of ceiling by applying three coats of white wash complete all as specified and directed. |
| 27 | M&L for Cement concrete type D2, 1:4:8( 40 mm graded agg) 100mm thick as in sub base of flooring complete all as specified and directed. |
| 28 | M & L for cement concrete work in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre,thickness of concrete 25 cm or less complete all as specified and directed. |
| 29 | M & L for 75mm thick Cement concrete for plinth protection type C2, 1:3:6 (using 40 mm graded aggregate) complete all as specified and directed. |
| 30 | M & L for forming contraction(dummy) joints 30mm deep x 10 mm wide filled with sealing compound garde 'A' complete all as specified & directed. |
| 31 | M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compund Grade 'A' complete all as specified and directed. |
| 32 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and directed. |
| 33 | M & L for preparation of newly App Membrance Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of Aluminium Paint solar reflective complete all as specified and directed. |
| 34 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surface of concrete complete all as specified and directed. |
| 35 | Surface exc. not exc 30 cm deep & averaging 15cm in soft soil complete all as specified and directed. |
| 36 | M&L for fine sand for filling under floors/tiles/paver blocks or in foundations including watering and consolidation complete all as specified and directed. |
| 37 | M&L for precast concrete coloured interlocking paver block rubber moulded, vibratory finished of approved shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and no pigment, M-40 Grade of approved colour and design complete all as specified and directed |
| 38 | M&L for PCC 1:2:4 type B-1 ( using 20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified and directed. Please Enable Macros to View BoQ information |
| 39 | M&L for PCC 1:2:4 type B-1 ( using 20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender