Tender For Repair, Painting And Polishing Of Map,Wooden & Steel Furniture Under Bso (E) Of Ge (East) Jabalpur
Tender Value
1.02 Crore
Estimated cost
Bid Submission
20 Nov 2026
23 days left
EMD
1.77 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Painting And Polishing Of Map,Wooden & Steel Furniture Under Bso (E) Of Ge (East) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031) Repair of Almirah large Steel with shelves as appended below : Removing of existing u/s fitting/ fixtures of Almirah large steel and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of 1mm thick CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL |
| 2 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)Leg |
| 3 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)Locking device with cover (except MS rod & lock) |
| 4 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)MS Rod 10 mm dia (except lock) to match with the existing locki arrangement of almirah |
| 5 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)Chromium plate handle |
| 6 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)MS Butt hings of size 75 mm |
| 7 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)Lock 6 lever with duplicate key Make:- Godraj /Harrison/Link |
| 8 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)MS cleats & pin or welding of shelf |
| 9 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)Shelves |
| 10 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)Shutter |
| 11 | Almirah large Steel with shelvesDrg No . (FD-67(M)/1031)Welding Spot |
| 12 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)Repair of Almirah medium Steel with shelves as appended below : Removing of existing u/s fitting/ fixtures of Almirah medium steel and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of 1mm thick CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL |
| 13 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)Leg |
| 14 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)Locking device with cover (except MS rod & lock) |
| 15 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)MS Rod 10 mm dia (except lock) to match with the existing locki arrangement of almirah |
| 16 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)Chromium plate handle |
| 17 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)MS hinges of size 75 mm |
| 18 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)Lock 6 lever with duplicate key Make:- Godraj /Harrison/Link |
| 19 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)MS cleats & pin or welding of shelf |
| 20 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)Shelves |
| 21 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)Shutter |
| 22 | Almirah Medium Steel with shelvesDrg No . (FD-67(M)/1032)Welding Spot |
| 23 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033) Repair of Almirah large Steel 1/2 H 1/2 sh appended below : Removing of existing u/s fitting/ fixtures of Almirah and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of 1mm thick CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL |
| 24 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)Leg |
| 25 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)Locking device with cover (except MS rod & lock) |
| 26 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)MS Rod 10 mm dia (except lock) to match with the existing locking arrangement of almirah |
| 27 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)Chromium plate handle |
| 28 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)MS hinges of size 75 mm |
| 29 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)Lock 6 lever with duplicate key Make:- Godraj /Harrison/Link |
| 30 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)MS cleats & pin or welding of shelve |
| 31 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)Shelves |
| 32 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)Shutter |
| 33 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)CP Hanging Rod with brackets |
| 34 | Almirah large Steel 1/2 H 1/2 shelves (FD-1033)Drg No . (FD-67(M)/1033)Welding Spot |
| 35 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) Repair of Almirah Medium Steel 1/2H 1/2Sh as appended below : Removing of existing u/s fitting/fixtures of Almirah and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of 1mm thick CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL/ Tisco |
| 36 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) Leg |
| 37 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) Locking device with Cover (except MS rod & lock) |
| 38 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah |
| 39 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) Chromium plate handle |
| 40 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) MS hinges of size 75mm |
| 41 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) Lock 6 lever with duplicate key Make:- Godrej / Harrison / Link |
| 42 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) MS cleats & pin or welding of Shelf |
| 43 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) Shelves |
| 44 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) Shutter |
| 45 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) CP Hanging Rod with brackets |
| 46 | Almirah medium Steel 1/2 H 1/2 shelves (FD-1034) Welding spot |
| 47 | Book case steel FD-1028/TP Repair of Book case steel as appended below : Removing of existing u/s fitting / fixtures of Book case steel and refixing / welding with new items and minor repair applying two coatss of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. (FD-1028/TP) |
| 48 | Book case steel FD-1028/TP Shelf MS sheet 1 mm thick |
| 49 | Book case steel FD-1028/TP Glass pane 5 mm thick of shutter |
| 50 | Book case steel FD-1028/TP Lock 6 lever with duplicate keys |
| 51 | Book case steel FD-1028/TP Steel Handle 100 mm long |
| 52 | Book case steel FD-1028/TP Complete base of Mild steel sheet |
| 53 | Book case steel FD-1028/TP Adjustment of shutter to easy functioning with necessary denting/ Welding to frame wherever required |
| 54 | Book case steel FD-1028/TP Welding spot |
| 55 | CHAIR CB STEEL WITH ARMS FD-75(M) Repairs to Chair CB (Tubular) Steel with arms (Chair CBA) for the following :- Removing old u/s fitting /Fixture of Chair CBA steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed.(FD-75M) |
| 56 | CHAIR CB STEEL WITH ARMS FD-75(M) Supply & Fix new flat iron Stiffeners 02 Nos each seat & back of Chair of size 20 mm wide and 3-4mm thick shall be welded to frame of chair perpendicular to side rail of approprate size on equal distance duly applying two coats of black paint over a coat of red oxide, all as spacified and directed by Egr in Chrge/GE |
| 57 | CHAIR CB STEEL WITH ARMS FD-75(M) Welding to frames wherever required at cracked/broken portion |
| 58 | CHAIR CB STEEL WITH ARMS FD-75(M) Supply & Fix PVC cap |
| 59 | CHAIR CB STEEL WITH ARMS FD-75(M) Supply & Fix PVC Stud with screw |
| 60 | CHAIR CB STEEL WITH ARMS FD-75(M) Supply & Fix Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat of 9 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality . Seat fixed with 4 nos of screw all as spacified and directed by EIC. |
| 61 | CHAIR CB STEEL WITH ARMS FD-75(M) Supply & Fix Complete back 50 mm thick synthetic foam of 32 density made to shape for back of 9 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality . Back fixed with 4 nos of screw all as spacified and directed by EIC. |
| 62 | CHAIR CB STEEL WITH ARMS FD-75(M) Supply & Fix 20 mm thick synthetic foam of 32 density made to shape for wooden handle and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality. |
| 63 | CHAIR CB STEEL WITHOUT ARMS FD-75(M)Repairs to Chair CB (Tubular) Steel without arms (Chair CB) for the following :- Removing old u/s fitting /Fixture of Chair CB steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed.(FD-75M) |
| 64 | CHAIR CB STEEL WITHOUT ARMS FD-75(M) Supply & Fix new flat iron Stiffeners 02 Nos each seat & back of Chair of size 20 mm wide and 3-4mm thick shall be welded to frame of chair perpendicular to side rail of approprate size on equal distance duly applying two coats of black paint over a coat of red oxide, all as spacified and directed by Egr in Chrge/GE |
| 65 | CHAIR CB STEEL WITHOUT ARMS FD-75(M) Supply & Fix new flat iron Stiffeners 02 Nos each seat & back of Chair of size 20 mm wide and 3-4mm thick shall be welded to frame of chair perpendicular to side rail of approprate size on equal distance duly applying two coats of black paint over a coat of red oxide, all as spacified and directed by Egr in Chrge/GE |
| 66 | CHAIR CB STEEL WITHOUT ARMS FD-75(M) Supply & Fix PVC cap |
| 67 | CHAIR CB STEEL WITHOUT ARMS FD-75(M) Supply & Fix PVC Stud with screw |
| 68 | CHAIR CB STEEL WITHOUT ARMS FD-75(M) Supply & Fix Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat of 9 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality . Seat fixed with 4 nos of screw all as spacified and directed by EIC. |
| 69 | CHAIR CB STEEL WITHOUT ARMS FD-75(M) Supply & Fix Complete back 50 mm thick synthetic foam of 32 density made to shape for back of 9 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality . Back fixed with 4 nos of screw all as spacified and directed by EIC. |
| 70 | Chair Varandah (FD-256) Repairs to Chair Varandah for the following :- |
| 71 | Chair Varandah (FD-256) Removing of old usnsv cane from Chair Varandah and prepare the conduit structure for painting by scrapping the old surface by grinder and painting with white synthetic enamal paint over a coat of white primer complete as directed- |
| 72 | Chair Varandah (FD-256) Weaving the seat, back and Handle of Chair Varandah in Godrej pattern with 4 mm wide approved quality cane on steel surface of chair complete all as specified and as directed. |
| 73 | Chair Varandah (FD-256) Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new PVC/ rubber shoe best quality in the same position as directed. |
| 74 | Chair Varandah (FD-256) Supply and fixing 20 mm dia 16 gauge MS conduit pipe including welding /smoothening of joints and painted surface applying two coat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed |
| 75 | Chair Varandah (FD-256) Welding to frames wherever required at cracked/broken portion |
| 76 | Chair Computer TP Repairs to Chair Computer (Various Size) for the following :- Removing old u/s fitting /Fixture of Chair Computer and supply and fixing new items All complete specified shown on drawing and directed. |
| 77 | Chair Computer TP Complete Seat made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth (not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 78 | Chair Computer TP Complete Back made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 79 | Chair Computer TP Arms rest of spot PVC superior quality complete |
| 80 | Chair Computer TP PVC Base Five stare alongwith wheels |
| 81 | Chair Computer TP Revolving wheels |
| 82 | Chair Computer TP Hydrolic System with assasarry (Air spot) |
| 83 | Chair Computer TP S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality |
| 84 | Chair Computer TP S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality |
| 85 | Chair Computer TP Welding to frames wherever required at cracked/broken portion |
| 86 | Chair Revolving Executive Med Back (TP) Repairs to Chair Revolving Executive Med back (Various Size) for the following :- Removing old u/s fitting /Fixture of Chair and supply and fixing new items All complete specified shown on drawing and directed. |
| 87 | Chair Revolving Executive Med Back (TP) Complete Seat made of 9 mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth/ rexine cloth (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 88 | Chair Revolving Executive Med Back (TP) Complete Back made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth/ rexine cloth (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 89 | Chair Revolving Executive Med Back (TP) Arms rest of black integral skin polyurethane reinforced with MS insert complete |
| 90 | Chair Revolving Executive Med Back (TP) PVC Base Five stare alongwith wheels. |
| 91 | Chair Revolving Executive Med Back (TP) Revolving wheels |
| 92 | Chair Revolving Executive Med Back (TP) Hydrolic System with assasarry (Air spot) |
| 93 | Chair Revolving Executive Med Back (TP) S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth tapestry cloth / rexine cloth of approved colour, taxture and quality. |
| 94 | Chair Revolving Executive Med Back (TP) S&F back cover for back and shall be stitched with superior quality tapestry cloth tapestry cloth / rexine cloth of approved colour, taxture and quality. |
| 95 | Chair Revolving Executive Med Back (TP) Welding to frames wherever required at cracked/ broken portion. |
| 96 | Chair Revolving Executive High Back (TP) Repairs to Chair Revolving High Back (Various Size) the following :- Removing old u/s fitting / Fixture of Chair Revolving /Chair revolving High back and supply and fixing new items all complete specified & directed (TP) |
| 97 | Chair Revolving Executive High Back (TP) Complete Seat made of 9 mm thick hot prassed plywood with moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry rexine cloth/ spot leather (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 98 | Chair Revolving Executive High Back (TP) Complete Back made of 9 mm thick hot prassed plywood with moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry rexine cloth/ spot leather (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 99 | Chair Revolving Executive High Back (TP) Arms rest of black integral skin polyurethane reinforced with MS insert complete. |
| 100 | Chair Revolving Executive High Back (TP) Steel Base 5 star alongwith wheels |
| 101 | Chair Revolving Executive High Back (TP) Wheels |
| 102 | Chair Revolving Executive High Back (TP) Hydrolic System with assessary (Air spot) |
| 103 | Chair Revolving Executive High Back (TP) S&F Seat cover for seat and shall be stitched with superior quality rexine cloth/ spot leather of approved colour, taxture and quality. |
| 104 | Chair Revolving Executive High Back (TP) S&F back cover for back and shall be stitched with superior quality rexine cloth/ spot leather of approved colour, taxture and quality. |
| 105 | Chair Revolving Executive High Back (TP) Welding to frames wherever required at cracked/broken portion |
| 106 | Chair Steel Visitor TPRepairs to Chair Steel Visitor for the following :- Removing old u/s fitting /Fixture of Chair Executive visitor (Chair Writing Steel) such as seat,back etc and supply and fixing new items All complete specified shown on drawing and directed |
| 107 | Chair Steel Visitor TP Complete Seat made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 108 | Chair Steel Visitor TP Complete back made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth(Not less than Rs 350/- per meter) of approved colour, taxture & quality |
| 109 | Chair Steel Visitor TP S&F Seat support mild steel strip 450mm x 20 mm x 03 mm with screw applying two coats of Synthetic enamel paint over a coat of red oxide. |
| 110 | Chair Steel Visitor TP Arns rest complete |
| 111 | Chair Steel Visitor TP Welding to frames wherever required at cracked/ broken portion |
| 112 | Chair Steel Visitor TP S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality |
| 113 | Chair Steel Visitor TP S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality |
| 114 | Charpoy GI Pipe (FD- 220/220 (R) Repairs to Charpoy GI Pipe for the following (FD-220/ 220 (R) :- |
| 115 | Charpoy GI Pipe (FD- 220/220 (R) Taking out broken/ u/s long rails from Charpoy GI pipe and Supply and fixing new long rails 1940 mm long duly threaded at both end out of GI tube 32mm dia medium grade all as spacified and directed. |
| 116 | Charpoy GI Pipe (FD- 220/220 (R)Taking out u/s short rails from Charpoy GI pipe and making short rails for GI charpoy made out of from broken long rails obtained from Charpoy including cutting & threading rails and fixing in replacement all as spacified and directed. |
| 117 | Charpoy GI Pipe (FD- 220/220 (R) Taking out u/s legs from Charpoy GI pipe and making legs for GI charpoy made out of from broken short rails obtained from Charpoy including cutting & threading rails and fixing in replacement all as spacified and directed. |
| 118 | Charpoy GI Pipe (FD- 220/220 (R)Taking out u/s check nut from Charpoy and S&F new check nuts of 6 mm wide,32 mm dia |
| 119 | Charpoy GI Pipe (FD- 220/220 (R)Taking out u/s GI elbow from Charpoy and S&F new GI elbow 32mm mm dia |
| 120 | Charpoy GI Pipe (FD- 220/220 (R)Removing of old existing u/s plytop from charpoy, tightening the frame and S&F new ply wood 12 mm thick comercial, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed |
| 121 | Charpoy GI Pipe (FD- 220/220 (R)Supply and fixing Stiffener 02 Nos in each charpoy of 40 mm wide and 6mm thick MS flat iron welded to GI Charpoy frame perpendicular to long rail of approprate size on equal distance duly applying two coats of black paint over a coat of red oxide,and 4 Nos of MS flat 100mmx25mmx6mm to be welded to the short rail for fixing ply wood all as spacified and directed. |
| 122 | Charpoy GI Pipe (FD- 220/220 (R)Welding to frames wherever required at cracked/broken portion all as directed |
| 123 | Locker Steel FD-1029Repairs to Locker Steel for the following :- Removing old u/s fitting /Fixture of Locker bed side steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed Make of 1mm thick CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL |
| 124 | Locker Steel FD-1029Leg |
| 125 | Locker Steel FD-1029Shelves |
| 126 | Locker Steel FD-1029Steel Butt Hinges 50mm |
| 127 | Locker Steel FD-1029Complete Shutter |
| 128 | Locker Steel FD-1029CP Hanging Rod ( conduct pipe) 20 mm dia 1.6 mm thick with Socket |
| 129 | Locker Steel FD-1029Chromium plated Handle 100mm / Haps & Staple |
| 130 | Locker Steel FD-1029Welding to frames wherever required at cracked/broken portion |
| 131 | Table office, officer ED-84 (M)/1003 Repair of Table office officer steel as appended below : Taking down existing U/S fitting/fixtures of Table office officer Steel and refixing/welding with new items and minor repair dully applying two coats of synthetic enamel paint over a coat of red oxide all complete specified shown on drawing and directed |
| 132 | Table office, officer ED-84 (M)/1003 Removing existing PL/Prelaminated MDF board top and S&F new top of 18 MM thick ISI marked 303 grade plywood shall be laminated with 1 mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm beadingall around the top |
| 133 | Table office, officer ED-84 (M)/1003 Lock 4 lever with duplicate key Make: Harison / Link / Godrej |
| 134 | Table office, officer ED-84 (M)/1003 Complete Drawers |
| 135 | Table office, officer ED-84 (M)/1003 Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed. |
| 136 | Table office, officer ED-84 (M)/1003 Rubber toe shoes . |
| 137 | Table office, officer ED-84 (M)/1003 Welding to frame wherever required |
| 138 | Table office, Clerk steel FD 84(M) / 1004Repair of Table office Clerk steel as appended below : Taking down existing U/S PL Board/steel fitting/fixtures of Table office Clerk Steel and refixing/welding with new items and minor repair dully applying two coats of synthetic enamel paint over a coat of red oxide all complete specified shown on drawing and directed |
| 139 | Table office, Clerk steel FD 84(M) / 1004Removing existing PL/Prelaminated MDF board top and S&F new top of 18 MM thick ISI marked 303 grade plywood shall be laminated with 1 mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm beadingall around the top |
| 140 | Table office, Clerk steel FD 84(M) / 1004Lock 4 lever with duplicate key Make: Harison / Link / Godrej |
| 141 | Table office, Clerk steel FD 84(M) / 1004Complete Drawers |
| 142 | Table office, Clerk steel FD 84(M) / 1004Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required |
| 143 | Table office, Clerk steel FD 84(M) / 1004Supply & Fix PVC toe shoes |
| 144 | Table office, Clerk steel FD 84(M) / 1004Welding to frame wherever required |
| 145 | Table Dining Ors steel FD-165Repairs to Table dining ORs for the following :- Removing old u/s fitting /Fixture of Table Dining ORs steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed.(FD-165) |
| 146 | Table Dining Ors steel FD-165Removing existing PL/Prelaminated MDF board top and S&F new top of 18 MM thick ISI marked 303 grade plywood shall be laminated with 1 mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm beadingall around the top |
| 147 | Table Dining Ors steel FD-165Leg |
| 148 | Table Dining Ors steel FD-165Cutting u/s portion of Leg and Supply and weld square tube 25mmx 25 mmx16 Guage 100mm long with existing Leg in base |
| 149 | Table Dining Ors steel FD-165Welding to frames wherever required at cracked/broken portion |
| 150 | Table Dining Ors steel FD-165S & F new rubber shoes in place of crecked and decayed shoes of leg |
| 151 | Table 900x600x760 with and without Drawer steel (FD- 1007/1008)Repair of Table 900x600x760 with and without Drawer steel as appended below : Taking down existing U/S Paticle board/steel fitting/ fixtures of Table 900x600mm with and w/o drawer Steel and refixing /welding with new items and minor repair all complete specified shown on drawing & directed (FD-1007/1008) |
| 152 | Table 900x600x760 with and without Drawer steel (FD- 1007/1008)Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beading all around the top |
| 153 | Table 900x600x760 with and without Drawer steel (FD- 1007/1008)Drawer made of 1 mm thick MS Sheet |
| 154 | Table 900x600x760 with and without Drawer steel (FD- 1007/1008)Brass lock for drawer with duplicate key |
| 155 | Table 900x600x760 with and without Drawer steel (FD- 1007/1008)Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required |
| 156 | Table 900x600x760 with and without Drawer steel (FD- 1007/1008)S & F new rubber shoes in place of crecked and decayed shoes of leg |
| 157 | Table 900x900x760 steel (FD- 1009)Repair of Table 900x900x760 steel as appended below : Taking down existing U/S fitting/ fixtures of Table 900x900mm Steel and refixing /welding with new items and minor repair all complete specified shown on drawing & directed (FD-1009) |
| 158 | Table 900x900x760 steel (FD- 1009)Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 159 | Table 900x900x760 steel (FD- 1009)S & F new rubber shoes |
| 160 | Bed hard Ply top FD- 246/247Repairs to Bed hard Ply top for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Bed hard ply top without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 161 | Bed hard Ply top FD- 246/247Leg |
| 162 | Bed hard Ply top FD- 246/247Long rail |
| 163 | Bed hard Ply top FD- 246/247Short rail |
| 164 | Bed hard Ply top FD- 246/247Stiffener |
| 165 | Bed hard Ply top FD- 246/247Head board frame Complete |
| 166 | Bed hard Ply top FD- 246/247Foot board frame Complete |
| 167 | Bed hard Ply top FD- 246/247Veneer ply with beading for Head Board |
| 168 | Bed hard Ply top FD- 246/247Veneer ply with beading for foot Board |
| 169 | Bed hard Ply top FD- 246/247Pywood 12mm thick BWR exterior grade as per IS 303 and fix with screws as in top of bed Make:- Kitply /Greenply/National ply |
| 170 | Bed hard Ply top FD- 246/247S&F triangle HW support for legs with rails of size 100 x 100x35mm mm with screw |
| 171 | Book Case - (FD- 237)Repairs to Book Case for the following:- Removing old u/s fitting /fixture of Book Case without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of French Polish all complete specified shown on drawing and directed. |
| 172 | Book Case - (FD- 237)Top of 18/19mm Prelaminated MDF Board |
| 173 | Book Case - (FD- 237)Side of 18/19mm Prelaminated MDF Board |
| 174 | Book Case - (FD- 237)Back of 6 mm thick plywood BWR Grade |
| 175 | Book Case - (FD- 237)Shutter made of 18/19 mm Prelaminated MDF Board with piano type hinges and steel bow handle of 100 mm long SS finish superior quality |
| 176 | Book Case - (FD- 237)Shelve made of 18/19 mm Prelaminated MDF Board |
| 177 | Book Case - (FD- 237)Bottom of 18/19 mm Prelaminated MDF Board |
| 178 | Book Case - (FD- 237)S&Fsteel handle of 100 mm long SS finish superior quality |
| 179 | Book Case - (FD- 237)Legs with supporting rails |
| 180 | Chair Writing FD-280 Repairs to Chair Writing for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Writing without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 181 | Chair Writing FD-280 Front leg |
| 182 | Chair Writing FD-280 Rear leg |
| 183 | Chair Writing FD-280 Front rail |
| 184 | Chair Writing FD-280 Side / rear rail |
| 185 | Chair Writing FD-280 Back rest (Back batten) |
| 186 | Chair Writing FD-280 Arm rest |
| 187 | Chair Writing FD-280 Side stiffener |
| 188 | Chair Writing FD-280 Centre stiffener |
| 189 | Chair Dining FD- 279Repairs to Chair Dining for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Dining without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 190 | Chair Dining FD- 279Front leg |
| 191 | Chair Dining FD- 279Rear leg |
| 192 | Chair Dining FD- 279Front rail |
| 193 | Chair Dining FD- 279Side rail |
| 194 | Chair Dining FD- 279Rear rail |
| 195 | Chair Dining FD- 279Back Batten |
| 196 | Chair Dining FD- 279Side Stiffener |
| 197 | Chair Dining FD- 279Centre Stiffener |
| 198 | Chair Wooden Bottom without arms FD -225, FD- 285Repairs to Chair Wooden Bottom without arms for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Wooden Bottom without arms without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 199 | Chair Wooden Bottom without arms FD -225, FD- 285Seat of chair wooden bottom made out of 6mm thick commercial plywood BWR type |
| 200 | Chair Wooden Bottom without arms FD -225, FD- 285Front leg |
| 201 | Chair Wooden Bottom without arms FD -225, FD- 285Rear leg |
| 202 | Chair Wooden Bottom without arms FD -225, FD- 285Front rail |
| 203 | Chair Wooden Bottom without arms FD -225, FD- 285Side rail |
| 204 | Chair Wooden Bottom without arms FD -225, FD- 285Rear rail |
| 205 | Chair Wooden Bottom without arms FD -225, FD- 285Back rest |
| 206 | Chair Wooden Bottom without arms FD -225, FD- 285Side Stiffener |
| 207 | Chair Wooden Bottom without arms FD -225, FD- 285Centre Stiffener |
| 208 | Chair Easy FD- 229Repairs to Chair Easy for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Easy without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 209 | Chair Easy FD- 229Front / Rear leg |
| 210 | Chair Easy FD- 229Arm rest |
| 211 | Chair Easy FD- 229Side rail of seat |
| 212 | Chair Easy FD- 229Rear rail of seat |
| 213 | Chair Easy FD- 229Front rail of seat |
| 214 | Chair Easy FD- 229Side rail of back |
| 215 | Chair Easy FD- 229Upper rail of back |
| 216 | Chair Easy FD- 229Bottom rail of back |
| 217 | Chair Easy FD- 229Bottom stiffener of Back |
| 218 | Chair Easy FD- 229Bottom stiffener front |
| 219 | Chair Easy Cushioned FD -358Repairs to Chair Easy Cushioned for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Easy Cushioned without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 220 | Chair Easy Cushioned FD -358Front / Rear leg |
| 221 | Chair Easy Cushioned FD -358Arm rest with Cushioned |
| 222 | Chair Easy Cushioned FD -358Side rail of seat |
| 223 | Chair Easy Cushioned FD -358Rear rail of seat |
| 224 | Chair Easy Cushioned FD -358Front rail of seat |
| 225 | Chair Easy Cushioned FD -358Side rail of back |
| 226 | Chair Easy Cushioned FD -358Upper rail of back |
| 227 | Chair Easy Cushioned FD -358Bottom rail of back |
| 228 | Chair Easy Cushioned FD -358Bottom stiffener of back |
| 229 | Chair Easy Cushioned FD -358Bottom stiffener of front |
| 230 | Chair Easy Cushioned FD -358Removing of old unsv Cushion from chairs and S&F new approved quality 75mm thick 40 density foam coverd with velvet/ tapestry cloth not less then 400/- per meter as size and shape of seat/ back existing chair all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop) |
| 231 | Chair Easy Cushioned FD -358Removing of old unsv Cushion from chairs and S&F new approved quality 75mm thick 40 density foam coverd with velvet/ tapestry cloth not less then 400/- per meter incl 12mm plywood as size and shape of seat/back existing chair as size and shape of seat existing chair all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop) |
| 232 | Peg Table FD- 277/ 236/ 384 Repairs to Peg table for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Peg Table without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 233 | Peg Table FD- 277/ 236/ 384 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 234 | Peg Table FD- 277/ 236/ 384 Legs |
| 235 | Peg Table FD- 277/ 236/ 384 Long Rail |
| 236 | Peg Table FD- 277/ 236/ 384 Short Rail |
| 237 | Peg Table FD- 277/ 236/ 384 Side stiffener |
| 238 | Peg Table FD- 277/ 236/ 384 Center stiffener |
| 239 | Peg Table FD- 277/ 236/ 384 Supply & fix triangle HW support for legs with rails of size 40 x 40 mm with screw |
| 240 | Side baord (FD- 241)Repairs to Side board for the following:- Removing old u/s fitting /fixture of side board without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of French Polish all complete specified shown on drawing and directed. (FD-241) |
| 241 | Side baord (FD- 241)Removing existing Pre-laminated board top and S & F new Top of 18/19mm thick Prelaminated MDF Board Exterior Grade, decorative choice alongwith 5mm thick , first class hard wood, weading. |
| 242 | Side baord (FD- 241)Side of 18 mm Prelaminated MDF Board |
| 243 | Side baord (FD- 241)Back of 6 mm thick plywood BWR Grade |
| 244 | Side baord (FD- 241)Shutter made of 18mm Prelaminated MDF Board with piano type hinges and steel bow handle of 100 mm long SS finish superior quality |
| 245 | Side baord (FD- 241)Shelve made of 18mm Prelaminated MDF Board |
| 246 | Side baord (FD- 241)Drawers made of 18mm Prelaminated MDF Board with one knob 25 mm |
| 247 | Side baord (FD- 241)S&F new addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each coners at 75 mm height as directed. |
| 248 | Side baord (FD- 241)S&F new teakwood shaded knob 25mm dia |
| 249 | Side baord (FD- 241)Legs of 1st class teak wood. |
| 250 | Side baord (FD- 241)S&F Veneer (Teak wood Shed) for Top |
| 251 | Side baord (FD- 241)S&F Veneer (Teak wood Shed) for side |
| 252 | Side baord (FD- 241)S&F Veneer (Teak wood Shed) for shutter |
| 253 | Side baord (FD- 241)S&F Veneer (Teak wood Shed) for Drawer |
| 254 | Sofa Chair (Single seater) FD- 281/373Repairs to Sofa Chair (Single seater) for the following :-Dismantiling and taking out carefully the following UNSV damage parts /fitting / fixture of Sofa Chair (Single Seater) without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 255 | Sofa Chair (Single seater) FD- 281/373Arm rest |
| 256 | Sofa Chair (Single seater) FD- 281/373Leg |
| 257 | Sofa Chair (Single seater) FD- 281/373Bottom and upper rails for seat & backl frame |
| 258 | Sofa Chair (Single seater) FD- 281/373Side Rails for seat and back frame |
| 259 | Sofa Chair (Single seater) FD- 281/373Wooden Battens of Seat & Back |
| 260 | Sofa Chair (Single seater) FD- 281/373Wooden Bearers of Seat & Back |
| 261 | Sofa Chair (Single seater) FD- 281/373Supply & Fix New high density foam of size 530x560x100mm of density 40 duly coverred with tapestry cloth of approved quality and shown on drgs.Note - Tapastry cloth shall be of approved / good quality, shade and colour as approved by the Engr-in-Charge and rate shall not be less than Rs. 400/-meter). The unit rate quoted shall be deemed to include the cost of tapestry cloth.Make - Sleepwell / Kurlon, Dunlop) |
| 262 | Sofa Chair (Single seater) FD- 281/373Supply & Fix New, Tapastry cloth cover for foam of size 530x560x100mm. tapestry cloth of cover should be approved quality alonwith best quality plastic Zip over Tapestry cloth complete aas approved by the Engr-in-Charge (Note - Tapastry cloth shall be of shade and colour as approved by the Engr-in-Charge and rate shall not be less than Rs. 400/-meter). |
| 263 | Sofa Three seater FD- 281/373Repairs to Sofa Three Seater for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Sofa Three Seaterwithout disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 264 | Sofa Three seater FD- 281/373Arm rest |
| 265 | Sofa Three seater FD- 281/373Leg |
| 266 | Sofa Three seater FD- 281/373Bottom and upper rails for seat & back frame |
| 267 | Sofa Three seater FD- 281/373Side Rails for seat back frame |
| 268 | Sofa Three seater FD- 281/373Wooden Battens of Seat & Back |
| 269 | Sofa Three seater FD- 281/373Wooden Bearers of Seat & Back |
| 270 | Table Dressing Gents (FD- 230) Repairs to Table Dressing Gents for the following :- Removing old u/s fitting /Fixture of Table Dressing Gents without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of French Polish all complete specified shown on drawing & directed. |
| 271 | Table Dressing Gents (FD- 230) Top of 12 mm Prelaminated MDF Board |
| 272 | Table Dressing Gents (FD- 230) Bottom of 12 mm Prelaminated MDF Board |
| 273 | Table Dressing Gents (FD- 230) side of 12 mm Prelaminated MDF Board |
| 274 | Table Dressing Gents (FD- 230) Back of 12 mm Prelaminated MDF Board |
| 275 | Table Dressing Gents (FD- 230) Drawer with 25 mm knob |
| 276 | Table Dressing Gents (FD- 230) S&F new teakwood shaded knob 25 mm dia |
| 277 | Table Dressing Gents (FD- 230) Mirror 5 mm thick with 6mm thick plywood back side with key plate |
| 278 | Table Dressing Gents (FD- 230) S & F Mirror 5 mm thick |
| 279 | Table Dressing Gents (FD- 230) S&F Veneer (Teak wood Shed) for Top of Box |
| 280 | Table Dressing Gents (FD- 230) S&F Veneer (Teak wood Shed) for side of Box |
| 281 | Table Dressing Gents (FD- 230) S&F Veneer (Teak wood Shed) for Front side of Drawer |
| 282 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Repairs to Table 900x600x760 (Table 3'x2') with and without Drawer for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table 3'x2' with and witout drawer without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 283 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 284 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Leg |
| 285 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Long Rail |
| 286 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Side rail |
| 287 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Side Stiffener |
| 288 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Centre Stiffener |
| 289 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Bottom/ Side/ Front/ Back of Drawer |
| 290 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Complete Drawer with 25 mm Knob |
| 291 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Teakwood sheded Knob for drawer 25mm |
| 292 | Table 900x600x760 (Table 3'x2') with and without Drawer(Drg No.: FD- 224, 283, FD- 231, FD- 284) Supply & fix triangle HW support for legs with rail of size 50 x 50 mm with screw |
| 293 | Table 900x900x760 (Table 3'x3') (Drg No.: DB- 4120 / FD- 291) Repairs to Table 900x 900x760 (Table 3'x3') for the following :- Dismantiling and taking out carefully the followingunsv damage parts /fitting / fixture of Table 3'x3' without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all specified shown on drawing. |
| 294 | Table 900x900x760 (Table 3'x3') (Drg No.: DB- 4120 / FD- 291) Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 295 | Table 900x900x760 (Table 3'x3') (Drg No.: DB- 4120 / FD- 291) Legs |
| 296 | Table 900x900x760 (Table 3'x3') (Drg No.: DB- 4120 / FD- 291) Rails |
| 297 | Table 900x900x760 (Table 3'x3') (Drg No.: DB- 4120 / FD- 291) Supply & fix triangle HW support for legs with rails of size 50 x 50 mm with screw |
| 298 | Table 600x600x760 (Table 2'x2') (Drg No. : FD -293Repairs to Table 600x600x760 (Table 2'x2') for the following :- Dismantiling and taking out carefully the followingunsv damage parts /fitting / fixture of Table 3'x3' without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all specified shown on drawing . |
| 299 | Table 600x600x760 (Table 2'x2') (Drg No. : FD -293Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 300 | Table 600x600x760 (Table 2'x2') (Drg No. : FD -293Legs |
| 301 | Table 600x600x760 (Table 2'x2') (Drg No. : FD -293Rails |
| 302 | Table 600x600x760 (Table 2'x2') (Drg No. : FD -293Supply & fix triangle HW support for legs with rails of size 50 x 50 mm with screw |
| 303 | Table Dining 6 Person ( FD -239, FD- 273)Repairs to Table Dining 6 person for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining 6 Person without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 304 | Table Dining 6 Person ( FD -239, FD- 273) Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 305 | Table Dining 6 Person ( FD -239, FD- 273)Legs |
| 306 | Table Dining 6 Person ( FD -239, FD- 273)Long Rail |
| 307 | Table Dining 6 Person ( FD -239, FD- 273) Short Rail |
| 308 | Table Dining 6 Person ( FD -239, FD- 273)Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw |
| 309 | Table 5' x 2' - 10\\" FD- 139Repairs to Table 5'x 2'-10\\" for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table 5' x2'-10\\" without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 310 | Table 5' x 2' - 10\\" FD- 139Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 311 | Table 5' x 2' - 10\\" FD- 139Leg |
| 312 | Table 5' x 2' - 10\\" FD- 139Long Rail |
| 313 | Table 5' x 2' - 10\\" FD- 139Short Rail |
| 314 | Table 5' x 2' - 10\\" FD- 139Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw |
| 315 | Table 6' x 3' - 6\\" (HFD- 2054)Repairs to Table 6'x3'-6\\" for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table 6'x3'-6\\" without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 316 | Table 6' x 3' - 6\\" (HFD- 2054)Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 317 | Table 6' x 3' - 6\\" (HFD- 2054)Legs |
| 318 | Table 6' x 3' - 6\\" (HFD- 2054)Long Rail |
| 319 | Table 6' x 3' - 6\\" (HFD- 2054)Short Rail |
| 320 | Table 6' x 3' - 6\\" (HFD- 2054)Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw |
| 321 | Table Dining 8 Person (FD -239, FD -273)Repairs to Table Dining 8 person for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining 8 Person without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 322 | Table Dining 8 Person (FD -239, FD -273)Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 323 | Table Dining 8 Person (FD -239, FD -273)Legs |
| 324 | Table Dining 8 Person (FD -239, FD -273)Long Rail |
| 325 | Table Dining 8 Person (FD -239, FD -273)Short Rail |
| 326 | Table Dining 8 Person (FD -239, FD -273)Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw |
| 327 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Repairs to Table Office Clerk Wooden 1380x850x760mm for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Office Clerk Wooden without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 328 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 329 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Leg |
| 330 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Long Rail |
| 331 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Short Rail |
| 332 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Short Stiffener |
| 333 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Long Stiffener |
| 334 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Bottom / Side / Front/ Back of Drawer |
| 335 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Complete Drawer with 25 mm knob |
| 336 | Table Office Clerk Wooden (1380 x 850 x 760 mm) Drg No. : DB -4120 Teakwood sheded Knob for drawer 40mm |
| 337 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Repairs to Table 1520x860x760mm for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table 1520x860x760mm without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 338 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 339 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Leg |
| 340 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Long Rail |
| 341 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Short Rail |
| 342 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Short Stiffener |
| 343 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Long Stiffener |
| 344 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Bottom / Side / Front / Back of Drawer |
| 345 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Complete Drawer with 40mm knob |
| 346 | Table ( 1520 x 860 x 760 mm) Drg No. : FD -1010 Supply & fix triangle HW support for legs with rails of size 100x 100 mm with screw |
| 347 | Table Writing FD -33(M), FD -275 Repairs to Table Writing for the following :- Dismantiling and taking out carefully the following unsv damage parts /fitting / fixture of Table Writing without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish complete specified shown on drawing and directed. |
| 348 | Table Writing FD -33(M), FD -275 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 349 | Table Writing FD -33(M), FD -275 Legs |
| 350 | Table Writing FD -33(M), FD -275 Long Rail |
| 351 | Table Writing FD -33(M), FD -275 Short Rail |
| 352 | Table Writing FD -33(M), FD -275 Short Stiffener |
| 353 | Table Writing FD -33(M), FD -275 Long Stiffener |
| 354 | Table Writing FD -33(M), FD -275 Side of Box of 18/19 mm Pre laminated Praticle Board |
| 355 | Table Writing FD -33(M), FD -275 Bottom of Box of 18/19 mm Pre laminated Praticle Board |
| 356 | Table Writing FD -33(M), FD -275 Shelve of Box of 18/19 mm Pre laminated Praticle Board |
| 357 | Table Writing FD -33(M), FD -275 Shutter made of 18/19 mm Pre laminated Particle Board with piano type hinges and teakwood shad knob 25mm dia |
| 358 | Table Writing FD -33(M), FD -275 Complete Drawer with 25 mm knob |
| 359 | Table Writing FD -33(M), FD -275 Back of box of 6mm plywood |
| 360 | Table Writing FD -33(M), FD -275 Brass Lock for drawer with duplicate keys |
| 361 | Table Writing FD -33(M), FD -275 Teakwood sheded Knob for drawer 35mm |
| 362 | Table Writing FD -33(M), FD -275 Supply and fixing Veneer 1mm thick (Teak wood Shed) for shutter of Box |
| 363 | Table Writing FD -33(M), FD -275 Supply and fixing Veneer 1mm thick (Teak wood Shed) for side of Box |
| 364 | Table Writing FD -33(M), FD -275 Supply & fix triangle HW support for legs with rails of size 50x 50 mm with screw |
| 365 | Teapoy FD -34(M), FD -232, FD -278Repairs to Teapoy for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Teapoy without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 366 | Teapoy FD -34(M), FD -232, FD -278Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 367 | Teapoy FD -34(M), FD -232, FD -278Legs |
| 368 | Teapoy FD -34(M), FD -232, FD -278Long Rail |
| 369 | Teapoy FD -34(M), FD -232, FD -278Short Stiffener |
| 370 | Teapoy FD -34(M), FD -232, FD -278Supply & fix triangle HW support for legs with rails of size 50 x 50 mm with screw |
| 371 | Table Centre FD -235, FD -274Repairs to Table Centre for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Centre without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of French Polish all around glossy finish all complete specified shown on drawing and directed. |
| 372 | Table Centre FD -235, FD -274Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 373 | Table Centre FD -235, FD -274Legs |
| 374 | Table Centre FD -235, FD -274Long Rail |
| 375 | Table Centre FD -235, FD -274Short Rail |
| 376 | Table Centre FD -235, FD -274Short Stiffener |
| 377 | Table Centre FD -235, FD -274Bottom Stiffener |
| 378 | Table Centre FD -235, FD -274Supply & fix triangle HW support for legs with rails of size 40 x 40 mm with screw |
| 379 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)Repair of Almirah Large Steel 1/2H 1/2 Sh as appended below : Removing of existing u/s fitting/fixtures of Almirah and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of 1mm thick CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL |
| 380 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)Leg |
| 381 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)Locking device with cover (except MS rod & lock) |
| 382 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah |
| 383 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)Chromium plate handle |
| 384 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)MS hinges of size 75mm |
| 385 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)Lock 6 lever with duplicate key ( Make- Harison/ Link /Godrej). |
| 386 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)MS cleats & pin or wealding |
| 387 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)Shelves |
| 388 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)Shutter |
| 389 | Almirah Large Steel 1/2 H 1/2 Shelves (FD/E6/MAP/18)CP Hanging Rod with brackets |
| 390 | Bed Hard IP Plytop (FD/E6/MAP/08 (R))Repair of Bed Hard IP Plytop as appended below : Removing of existing u/s fitting/fixtures of Bed Hard and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of MS rectegular pipe: Tata/ Jindal/ Surya/ Prakash/ SAIL |
| 391 | Bed Hard IP Plytop (FD/E6/MAP/08 (R))Plywood 12 mm thick 7 ply commercial BWR grade ISI Marked complete all as shown in drg and as directed. |
| 392 | Bed Hard IP Plytop (FD/E6/MAP/08 (R))18/19 mm thick exterior grade Prelaminated Particle board of footboard |
| 393 | Bed Hard IP Plytop (FD/E6/MAP/08 (R))18/19 mm thick exterior grade Prelaminated Particle board of Headboard |
| 394 | Bed Hard IP Plytop (FD/E6/MAP/08 (R))Long rail made out of MS rectegular pipe size as per drg duly painted complete all as per drg. |
| 395 | Bed Hard IP Plytop (FD/E6/MAP/08 (R))Short rail of head / footboard made out of MS rectegular pipe size as per drg duly painted complete all as per drg. |
| 396 | Bed Hard IP Plytop (FD/E6/MAP/08 (R))Legs made out of MS rectegular pipe size as per drg duly painted complete all as per drg. |
| 397 | Bed Hard IP Plytop (FD/E6/MAP/08 (R))PVC Shoe of best quality. |
| 398 | Bed Hard IP Plytop (FD/E6/MAP/08 (R))Welding to frames wherever required at cracked/broken portion |
| 399 | Bin linen Multipurpose (FD/E6/MAP/09)Repairs to Bin linen Multipurpose for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Bin linen Multipurpose without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and 18/19mm thick Per laminated MDF board minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing |
| 400 | Bin linen Multipurpose (FD/E6/MAP/09)Top as shown on drawing and as directed. |
| 401 | Bin linen Multipurpose (FD/E6/MAP/09)Door/shutter. |
| 402 | Bin linen Multipurpose (FD/E6/MAP/09)Sliding channel of drawer |
| 403 | Bin linen Multipurpose (FD/E6/MAP/09)Shelve |
| 404 | Bin linen Multipurpose (FD/E6/MAP/09)Sides |
| 405 | Bin linen Multipurpose (FD/E6/MAP/09)Back |
| 406 | Bin linen Multipurpose (FD/E6/MAP/09)Complete Drawer |
| 407 | Bin linen Multipurpose (FD/E6/MAP/09)Steel bow handle of 100 mm long SS finish superior quality complete all as shown in drawing and as directed. |
| 408 | Bin linen Multipurpose (FD/E6/MAP/09)S&F new addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each coners at 75 mm height as directed. |
| 409 | Chair Computer (FD/E6/MAP/01)Repairs to Chair Computer MAP for the following :- Removing old u/s fitting /Fixture of Chair Computer and supply and fixing new items All complete specified shown on drawing and directed. |
| 410 | Chair Computer (FD/E6/MAP/01)Complete Seat made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 411 | Chair Computer (FD/E6/MAP/01)Complete Back made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth |
| 412 | Chair Computer (FD/E6/MAP/01)Arms rest of spot PVC superior quality complete |
| 413 | Chair Computer (FD/E6/MAP/01)PVC Base Five stare alongwith wheels |
| 414 | Chair Computer (FD/E6/MAP/01)Revolving wheels |
| 415 | Chair Computer (FD/E6/MAP/01)Hydrolic System with assasarry (Air spot) |
| 416 | Chair Computer (FD/E6/MAP/01)S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality |
| 417 | Chair Computer (FD/E6/MAP/01)S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality |
| 418 | Chair Computer (FD/E6/MAP/01)Welding to frames wherever required at cracked/broken portion |
| 419 | Chair Dining ORs (FD/MAP -II/05) Repairs to Chair Dining ORs for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Dining ORs without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing and directed. |
| 420 | Chair Dining ORs (FD/MAP -II/05) Front leg |
| 421 | Chair Dining ORs (FD/MAP -II/05) Rear leg |
| 422 | Chair Dining ORs (FD/MAP -II/05) Front rail |
| 423 | Chair Dining ORs (FD/MAP -II/05) Side rail |
| 424 | Chair Dining ORs (FD/MAP -II/05) Rear rail |
| 425 | Chair Dining ORs (FD/MAP -II/05) Back rest |
| 426 | Chair Dining ORs (FD/MAP -II/05) Side Stiffener |
| 427 | Chair Dining ORs (FD/MAP -II/05) Centre Stiffener |
| 428 | Chair Dining ORs (FD/MAP -II/05) Removing u/s PVC sheet from chairs dining and replacing new PVC Sheet with screw alongwith additional wooden stiffiner support to sheet as directed by Engr-in-Charge.(Make:os Sheet : Amco/ Cello/ Neelkamal) |
| 429 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Repairs to Chair Dining Cushioned (Offr) for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Dining Cushioned (Offr) without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing and directed. |
| 430 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Front leg |
| 431 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Rear leg |
| 432 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Front rail |
| 433 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Side rail |
| 434 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Rear rail |
| 435 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Back rest |
| 436 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Side Stiffener |
| 437 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Centre Stiffener |
| 438 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Removing of old unsv Cushion from chairs dining Cushion and S&F new approved quality 75mm thick 40 density foam coverd with /velvet/tapestry cloth not less then 350/- per meter as size and shape of seat existing chair dining cushion all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop) |
| 439 | Chair Dining Cushioned (Offr) FD/MAP -II/04 Removing of old unsv Cushion with plywood from chairs dining Cushion and S&F new approved quality 75mm thick 40 density foam coverd with velvet/tapestry cloth not less then 350/- per meter incl 12mm plywood as size and shape of seat existing chair dining cushion all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop) |
| 440 | Chair Dining Long Back FD-357Repairs to Chair Dining Long Back for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Dining Long Back without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing and directed. |
| 441 | Chair Dining Long Back FD-357Front leg |
| 442 | Chair Dining Long Back FD-357Rear leg |
| 443 | Chair Dining Long Back FD-357Front rail |
| 444 | Chair Dining Long Back FD-357Side rail |
| 445 | Chair Dining Long Back FD-357Rear rail |
| 446 | Chair Dining Long Back FD-357Side Stiffener |
| 447 | Chair Dining Long Back FD-357Centre Stiffener |
| 448 | Chair Dining Long Back FD-357Removing of old unsv Seat Cushion from chairs dining and S&F new approved quality 75mm thick 40 density foam coverd with velvet/tapestry cloth not less then 350/- per meter as size and shape of seat existing chair dining cushion all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop) |
| 449 | Chair Dining Long Back FD-357Removing of old unsv Back Cushion from chairs dining and S&F new approved quality 75mm thick 40 density foam coverd with velvet/tapestry cloth not less then 350/- per meter as size and shape of seat existing chair dining cushion all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop) |
| 450 | Chair Dining Long Back FD-357Removing of old unsv complete seat with plywood from chairs dining and S&F new seat approved quality 75mm thick 40 density foam coverd with velvet/tapestry cloth not less then 350/- per meter incl 12mm plywood as size and shape of seat existing chair dining all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop) |
| 451 | Chair Dining Long Back FD-357Removing of old unsv complete back with plywood from chairs dining and S&F new seat approved quality 75mm thick 40 density foam coverd with velvet/tapestry cloth not less then 350/- per meter incl 12mm plywood as size and shape of back existing chair dining all as specified and directed by Engr-in-Charge(Make:Sleepwell/ Curlon/Dunlop) |
| 452 | Chair School with Hand Board FD/E6/MAP/05Removing of old unsv complete back with plywood from chairs dining and S&F new seat approved quality 75mm thick 40 density foam coverd with velvet/tapestry cloth not less then 350/- per meter incl 12mm plywood as size and shape of back existing chair dining all as specified and directed by Engr-in-Charge(Make:Sleepwell/ Curlon/Dunlop) |
| 453 | Chair School with Hand Board FD/E6/MAP/05Complete Writing Pad made of 18 mm thick Per laminated MDF board alongwith 5mm thick wooden beading and fixing with chair handle with suitable hinges. |
| 454 | Chair School with Hand Board FD/E6/MAP/05Welding to frames wherever required at cracked/broken portion all as directed |
| 455 | Chair School with Hand Board FD/E6/MAP/05Supply & fix New PVC Seat and Back including taking out old unserviceable seat and back complete all as specified and as shown on drawing. |
| 456 | Chair School with Hand Board FD/E6/MAP/05Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed. |
| 457 | Chair School with Hand Board FD/E6/MAP/05Supply and fixing 25 mm dia 16 gauge MS conduit pipe including welding /smoothening of joints and painted surface applying two coat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed |
| 458 | Chair Varandah (FD/E6/MAP -II/06)Repairs to Chair Varandah for the following :- |
| 459 | Chair Varandah (FD/E6/MAP -II/06)Removing of old usnsv PVC seat & back from Chair Varandah and prepare the conduit structure for painting by scrapping the old surface by grinder and painting with white synthetic enamal paint over a coat of white primer complete as directed. |
| 460 | Chair Varandah (FD/E6/MAP -II/06)S&F New PVC Seat & Back of Chair Varandah as specified and as directed. |
| 461 | Chair Varandah (FD/E6/MAP -II/06)Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new PVC/ rubber shoe best quality in the same position as directed. |
| 462 | Chair Varandah (FD/E6/MAP -II/06)Supply and fixing 20 mm dia 16 gauge MS conduit pipe including welding /smoothening of joints and painted surface applying two coat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed |
| 463 | Chair Varandah (FD/E6/MAP -II/06)Welding to frames wherever required at cracked/broken portion |
| 464 | Chair Writing (FD/E6/MAP/12)Repairs to Chair Writing for the following :- Removing old u/s fitting /Fixture of Chair writing Steel such as seat,back etc and supply and fixing new items All complete specified shown on drawing and directed |
| 465 | Chair Writing (FD/E6/MAP/12)Complete Seat made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 466 | Chair Writing (FD/E6/MAP/12)Complete Back made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm 32 density made to shape for shall be stitched with superior quality tapestry cloth (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 467 | Chair Writing (FD/E6/MAP/12)S&F Seat support mild steel strip 450mm x 20 mm x 03 mm with screw applying two coats of Synthetic enamel paint over a coat of red oxide. |
| 468 | Chair Writing (FD/E6/MAP/12)Arms rest complete. |
| 469 | Chair Writing (FD/E6/MAP/12)S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 470 | Chair Writing (FD/E6/MAP/12)S&F back cover for seat and shall be stitched with superior quality tapestry cloth (Not less than Rs 350/- per meter) of approved colour, taxture and quality |
| 471 | Charpoy IP Hardtop MAP ( FD/MAP -II/01) Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of CHARPOY IP HARDTOP without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, minor repair all complete specified shown on drawing and directed. |
| 472 | Charpoy IP Hardtop MAP ( FD/MAP -II/01) Plywood top of 12 mm thick 7 ply commercial BWR grade ISI Marked complete |
| 473 | Charpoy IP Hardtop MAP ( FD/MAP -II/01) Long rail made out of MS rectegular pipe duly painted without distrubing shaape and size of charpoy complete all as per drg. |
| 474 | Charpoy IP Hardtop MAP ( FD/MAP -II/01) Short rail made out of MS rectegular pipe duly painted without distrubing shaape and size of charpoy complete all as per drg. |
| 475 | Charpoy IP Hardtop MAP ( FD/MAP -II/01) Legs made out of MS rectegular pipe duly painted without distrubing shaape and size of charpoy complete all as per drg |
| 476 | Charpoy IP Hardtop MAP ( FD/MAP -II/01) M&L for taking out old unserviceable PVC Shoe and S&F new PVC shoe of best quality. |
| 477 | Charpoy IP Hard top MAP ( FD/MAP -II/01) Welding to frames wherever required at cracked/broken portion all as directed |
| 478 | Charpoy Folding IP with Hard top FD -388 (R)Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of CHARPOY Folding IP HARDTOP without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, minor repair all complete specified shown on drawing and directed. |
| 479 | Charpoy Folding IP with Hard top FD -388 (R)Plywood 8/9 mm thick commercial BWR grade ISI Marked complete all as shown in drg and as directed. |
| 480 | Charpoy Folding IP with Hard top FD -388 (R)M&L for taking out old unserviceable PVC Shoe and S&F new PVC shoe of best quality. |
| 481 | Charpoy Folding IP with Hard top FD -388 (R)Welding to frames wherever required at cracked/broken portion all as directed |
| 482 | Dressing Mirror Gents (FD/E6/MAP/16)Repairs to Dressing Mirror Gents (MAP) for the following :- Removing old u/s fitting /Fixture of Dressing Gents (MAP) with Mirror without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of Melamine polish all complete specified shown on drawing & directed. |
| 483 | Dressing Mirror Gents (FD/E6/MAP/16)Top of 12 mm Per laminated MDF board |
| 484 | Dressing Mirror Gents (FD/E6/MAP/16)Bottom of 12 mm Per laminated MDF board |
| 485 | Dressing Mirror Gents (FD/E6/MAP/16)side of 12 mm Per laminated MDF board |
| 486 | Dressing Mirror Gents (FD/E6/MAP/16)Back of 12 mm Per laminated MDF board with two key plate |
| 487 | Dressing Mirror Gents (FD/E6/MAP/16)Complete Mirror 5 mm thick of size 760x360mm with 6mm thick plywood |
| 488 | Dressing Mirror Gents (FD/E6/MAP/16)Mirror 5 mm thick size 760x360mm |
| 489 | Dressing Mirror Gents (FD/E6/MAP/16)Glass Shelve |
| 490 | Dressing Mirror Gents (FD/E6/MAP/16)S & Fix New Magnatick Lock |
| 491 | Rack Shoe Steel (FD -MAP/02)Repairs to Rack shoe steel for the following:- Taking down existing U/S fitting/fixtures of Shoe Rack and refixing/ welding and minor repair applying two coats of synthetic enamel paint over one coat of red oxide, all complete as specified and asspecified |
| 492 | Rack Shoe Steel (FD -MAP/02)Net Shelve |
| 493 | Rack Shoe Steel (FD -MAP/02)Welding to frame wherever required complete all as directed. |
| 494 | Rack Shoe Steel (FD -MAP/02)Rubber Shoe |
| 495 | Rack Shoe Steel (FD -MAP/02)Supply and fixing 25 mm dia 16 gauge MS conduit pipe including welding /smoothening of joints and painted surface applying two coat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed |
| 496 | Sofa Chair (Single seater) FD -FD/MAP -II/02Repairs to Sofa Chair (Single seater) for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Sofa Chair (Single Seater) without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing and directed. |
| 497 | Sofa Chair (Single seater) FD -FD/MAP -II/02Arm rest |
| 498 | Sofa Chair (Single seater) FD -FD/MAP -II/02Leg |
| 499 | Sofa Chair (Single seater) FD -FD/MAP -II/02Bottom and upper rails for seat & back frame |
| 500 | Sofa Chair (Single seater) FD -FD/MAP -II/02Side Rails for seat and back frame |
| 501 | Sofa Chair (Single seater) FD -FD/MAP -II/02Wooden Bearers of Seat & Back |
| 502 | Sofa Chair (Single seater) FD -FD/MAP -II/02Complete Seat Plywood 12mm thick |
| 503 | Sofa Chair (Single seater) FD -FD/MAP -II/02Complete back Plywood 12mm thick |
| 504 | Sofa Chair (Single seater) FD -FD/MAP -II/02Supply & Fix New high density foam of size 530x560x100mm of density 40 duly coverred with tapestry cloth of approved quality and shown on drgs. Note: Tapastry cloth shall be of approved / good quality, shade and colour as approved by the Engr-in-Charge and rate shall not be less than Rs. 350/-meter). Make - Sleepwell / Kurlon, Dunlop) |
| 505 | Sofa Chair (Single seater) FD -FD/MAP -II/02Supply & Fix New, Tapastry cloth cover for foam of size 530x560x100mm. tapestry cloth of cover should be approved quality along with best quality plastic Zip over Tapestry cloth complete as approved by the GE (Note - Tapastry cloth shall be of shade and colour as approved by the GE and rate shall not be less than Rs. 350/-meter). |
| 506 | Sofa Three seater (FD- FD/MAP -II/02)Repairs to Sofa Three Seater for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Sofa Three Seater without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing and directed. |
| 507 | Sofa Three seater (FD- FD/MAP -II/02)Arm rest |
| 508 | Sofa Three seater (FD- FD/MAP -II/02)Leg |
| 509 | Sofa Three seater (FD- FD/MAP -II/02)Bottom and upper rails for seat & back frame |
| 510 | Sofa Three seater (FD- FD/MAP -II/02)Side Rails for seat and back frame |
| 511 | Sofa Three seater (FD- FD/MAP -II/02)Wooden Bearers of Seat & Back |
| 512 | Sofa Three seater (FD- FD/MAP -II/02)Complete Seat Plywood 12mm thick |
| 513 | Sofa Three seater (FD- FD/MAP -II/02)Complete back Plywood 12mm thick |
| 514 | Table Bed Side Steel (MAP) FD/E6/MAP/15(R) REPAIR TO TABLE BED SIDE STEEL: Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Tabloe Bed side without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality,all complete specified shown on drawing |
| 515 | Table Bed Side Steel (MAP) FD/E6/MAP/15(R) Replacement of unsv/broken MS square pipe with new 18mm MS square pipe duly black painted all as per drg. |
| 516 | Table Bed Side Steel (MAP) FD/E6/MAP/15(R) Top/ Side/Base of made to 18/19mm thick Per laminated MDF board exterior grade with 4 mm thick teakwood edging all around all as per drawing |
| 517 | Table Bed Side Steel (MAP) FD/E6/MAP/15(R) Upper drawer of table bed side with telescopic channel all as per drawing. |
| 518 | Table Bed Side Steel (MAP) FD/E6/MAP/15(R) Lower drawer of table bed side with telescopic channel all as per drawing. |
| 519 | Table Bed Side Steel (MAP) FD/E6/MAP/15(R) Hard rubber shoe of best quality, as specified and as shown on drg. |
| 520 | Table Bed Side Steel (MAP) FD/E6/MAP/15(R) MS handle cromium plated on both the drawers complete all as per drg. |
| 521 | Table Bed Side Steel (MAP) FD/E6/MAP/15(R) Back as per drg. |
| 522 | Table Bed Side Steel (MAP) FD/E6/MAP/15(R) Welding to frames wherever required at cracked/broken portion all as directed |
| 523 | Table Dressing Ladies (MAP) (FD/MAP- II/07)Repairs to Table Dressing Ladies (MAP) for the following :- Removing old u/s fitting /Fixture of Table Dressing Ladies MAP without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of Melamine polish all complete specified shown on drawing & directed. |
| 524 | Table Dressing Ladies (MAP) (FD/MAP- II/07)Looking mirror of thikness 5mm, electro copper plated, totally free from distortion and duly framed in teakwood all around complete |
| 525 | Table Dressing Ladies (MAP) (FD/MAP- II/07)Back ply made of 4mm thick commercial plywood complete |
| 526 | Table Dressing Ladies (MAP) (FD/MAP- II/07)S&F vertical member made of 1st class teak wood of size made to shape of table dressing and duly planed and wrought on all side |
| 527 | Table Dressing Ladies (MAP) (FD/MAP- II/07)Shutter made of Per laminated MDF board exterior grade 18/19 mm thick including 4mm thick teak wood edging all around complete |
| 528 | Table Dressing Ladies (MAP) (FD/MAP- II/07)Sides made of MDF board exterior grade 18/19mm thick complete |
| 529 | Table Dressing Ladies (MAP) (FD/MAP- II/07)Top made of pre-laminated Per laminated MDF board exterior grade 18/19mm thick complete all as shown on drawing and as directed. |
| 530 | Table Dressing Ladies (MAP) (FD/MAP- II/07)S&F new heavy duty revolving nylon wheel superior quality in base of stool of table dressing ladies |
| 531 | Table Dressing Ladies (MAP) (FD/MAP- II/07)Telescopic channel for drawer of table dressing ladies made of superior quality duly fixing with screws |
| 532 | Table Dressing Ladies (MAP) (FD/MAP- II/07)Cushions shall be 360x310x75mm of 40 density covered with superior quality tapestry (shall not be less than RS: 350.00 per mtr) colour & shade as approved by GE. Rest all as per drg. |
| 533 | Table Dressing Ladies (MAP) (FD/MAP- II/07)Complete Base of stool alongwith Wheels |
| 534 | Table Dining 4 Person 1200x900x760mm (FD/MAP- II/03)Repairs to Table Dining 4 person for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing and directed. |
| 535 | Table Dining 4 Person 1200x900x760mm (FD/MAP- II/03)Removing existing PL board top and S&F new Top of 18 MM thick ISI marked 303 grade plywood shall be laminated with 1 mm sunmica sheet (Colour and shed as approved by GE) alongwith 4/5mm beading all around the top. |
| 536 | Table Dining 4 Person 1200x900x760mm (FD/MAP- II/03)Legs |
| 537 | Table Dining 4 Person 1200x900x760mm (FD/MAP- II/03)Long Rail |
| 538 | Table Dining 4 Person 1200x900x760mm (FD/MAP- II/03)Short Rail |
| 539 | Table Dining 4 Person 1200x900x760mm (FD/MAP- II/03)Supply & fix triangle HW support for legs with rail of size 100 x 100 mm with screw |
| 540 | Table Dining 6 Person 1500x900x760mm (FD/MAP- II/03)Repairs to Table Dining 6 person for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing and directed. |
| 541 | Table Dining 6 Person 1500x900x760mm (FD/MAP- II/03)Removing existing PL board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1 mm sunmica sheet (Colour and shed as approved by GE) alongwith 4/5 mm beading all around the top. |
| 542 | Table Dining 6 Person 1500x900x760mm (FD/MAP- II/03)Leg |
| 543 | Table Dining 6 Person 1500x900x760mm (FD/MAP- II/03)Long Rail |
| 544 | Table Dining 6 Person 1500x900x760mm (FD/MAP- II/03)Short Rail |
| 545 | Table Dining 6 Person 1500x900x760mm (FD/MAP- II/03)Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw |
| 546 | Table Dining 8 Person 1800x900x760mm (FD/MAP- II/03)Repairs to Table Dining 8 person for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing and directed. |
| 547 | Table Dining 8 Person 1800x900x760mm (FD/MAP- II/03)Removing existing PL board top and S&F new Top of 18 MM thick ISI marked 303 grade plywood shall be laminated with 1 mm sunmica sheet (Colour and shed as approved by GE) alongwith 4/5mm beading all around the top. |
| 548 | Table Dining 8 Person 1800x900x760mm (FD/MAP- II/03)Legs |
| 549 | Table Dining 8 Person 1800x900x760mm (FD/MAP- II/03)Long Rail |
| 550 | Table Dining 8 Person 1800x900x760mm (FD/MAP- II/03)Short Rail |
| 551 | Table Dining 8 Person 1800x900x760mm (FD/MAP- II/03)Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw |
| 552 | Table Computer (FD/E6/MAP/03)REPAIR TO TABLE COMPUTER FD/E6/MAP/03 for the following |
| 553 | Table Computer (FD/E6/MAP/03)Taking out old unserviceable top and S&F new top of made to shape out of 18/19mm thick prelaminated MDF board exterior grade with 4 mm thick teakwood edging all around all as per drawing. |
| 554 | Table Computer (FD/E6/MAP/03)S&F new keyboard shelf with telescopic channel of table computer all as per drawing |
| 555 | Table Computer (FD/E6/MAP/03)S&F new drawer with telescopic channel of table computer all as per drawing. |
| 556 | Table Computer (FD/E6/MAP/03)S&F new hard rubber shoe of best quality, as specified and as shown on drg. |
| 557 | Table Computer (FD/E6/MAP/03)S&F new handle of drawer of best quality, as specified and as shown on drg. |
| 558 | TV Trolly (FD/E6/MAP/04(R))Repairs to TV Trolly for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of TV trolly without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, 18/19 mm thick Prelaminated Particle Board Exterior Grade, alongwith 5mm thick , first class hard wood, weading and minor repair applying two coats of Melamine polish all around glossy finish all complete specified shown on drawing and directed. |
| 559 | TV Trolly (FD/E6/MAP/04(R))Top of 18/19 mm thick Prelaminated MDF Board Exterior Grade,Make:- Kitply,/ Bhutan board / Ecoboard / Century Lam . |
| 560 | TV Trolly (FD/E6/MAP/04(R))Side |
| 561 | TV Trolly (FD/E6/MAP/04(R))Complete Base with Castor wheel 4 Nos |
| 562 | TV Trolly (FD/E6/MAP/04(R))Brass Handle |
| 563 | TV Trolly (FD/E6/MAP/04(R))Complete Shutter of 18/19 mm thick Prelaminated MDF Board Exterior Grade |
| 564 | TV Trolly (FD/E6/MAP/04(R))Complete Shutter of 5.5mm glass Shutter with Brass handle |
| 565 | TV Trolly (FD/E6/MAP/04(R))Shelfe of 18/19 mm thick Prelaminated MDFe Board Exterior Grade |
| 566 | TV Trolly (FD/E6/MAP/04(R))Castor Wheel |
| 567 | Teapoy Verandah (FD/E6/MAP/17)REPAIR TO TEAPOY VERANDAH FD/E6/MAP/17 for the following |
| 568 | Teapoy Verandah (FD/E6/MAP/17)Removing existing PL/MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top |
| 569 | Teapoy Verandah (FD/E6/MAP/17)Removing of unserviceable shoe and S & F new hard rubber shoes of best quality, as per drawing. |
| 570 | Hat Stand with mirror FD -233/361Repairs to Hat stand with mirror for the following :- Removing old u/s fitting/fixture of Hat stand with mirror without disturbing to the other parts and supply and fixing with new items of best quality and minor repair applying two coats of French Polish All complete specified shown on drawing and directed. |
| 571 | Hat Stand with mirror FD -233/361Complete base of 18 mm Prelaminated MDF Board with one side teak finish fixed with 5mm thick timber beading around the edging. |
| 572 | Hat Stand with mirror FD -233/361Peg huck of 100mm long Brass/ Chromium plated metal. |
| 573 | Hat Stand with mirror FD -233/361Mirror 5- 5.5 mm thick electro copper plated mirror totally free from distortion with suitablen beading. |
| 574 | Various Type of Chairs Recanning of Various Type of Chairs Removing of old cane from various chairs such as Chair dining, chair writing, chair easy,chair CB office , chair Tubular Steel,stool dressing CB etc.and replacing the same with new 2mm wide half round (oval shape) white plastic cane,weaving,in Godrej pattern with 4mm wide for side border all as specified. (Make:Maharashtra Cane/shah/premier) |
| 575 | Various Type of TablesRemoving of old PVC shoe from various Type of Tables such as Table dining 4/6/8 person, Table Writing, table 3'x2' with /witout drawer,Table 3'x3' , table 2'x2' Table office Clerk Sofa etc and replacing the same with new 25mm dia and 20 mm high be screwed to bottom of legs all as specified |
| 576 | Various Type of Chairs Removing of old PVC shoe from various Type of Chairs such as Chair dining, Chair Writing, Chair Easy, Chair WB, Chaier CB, Chair dining JCO /OR, Chair Dining Offr, Chair Dining Long Back etc and replacing the same with new 20 mm dia and 10 mm high be screwed to bottom of legs all as specified an das directed. |
| 577 | M&L for preparing & polishing Material & Labour for preparing & polishing of new or old wooden and wood based materials of any description and of any lenghth and width and applying Melamine polish to furniture articles as specified with one or more coat till glossy finish achieved All as specified in particular specifications and as shown on drawing and as directed by EIC for the following wooden furniture:- |
| 578 | M&L for preparing & polishingFD-245/ 246Bed Hard Ply Wood Top |
| 579 | M&L for preparing & polishingFD- 237BooK Case |
| 580 | M&L for preparing & polishingFD/E6/MAP/09Bin Soil Multipurpose |
| 581 | M&L for preparing & polishingFD- 228/279Chair Dining |
| 582 | M&L for preparing & polishingFD/MAP -II/05Chair Dining ORs |
| 583 | M&L for preparing & polishingFD/MAP -II/04Chair Dining Offr |
| 584 | M&L for preparing & polishingFD- 357Chair Dining Long Back |
| 585 | M&L for preparing & polishingFD- 229Chair Easy |
| 586 | M&L for preparing & polishingFD- 358Chair Easy Cushioned |
| 587 | M&L for preparing & polishingFD- 225/285Chair wooden bottom without Arm |
| 588 | M&L for preparing & polishingFD- 250/280Chair Writing |
| 589 | M&L for preparing & polishingFD/MAP- II/16Dressing Mirror Gents |
| 590 | M&L for preparing & polishingFD- 233Hat stand w/mirror |
| 591 | M&L for preparing & polishingFD- 236 /277Peg table |
| 592 | M&L for preparing & polishingFD- 241Side Board |
| 593 | M&L for preparing & polishingFD- 281Sofa Chair single seater |
| 594 | M&L for preparing & polishingFD- 282Sofa Two seator |
| 595 | M&L for preparing & polishingFD- 282Sofa Three seator |
| 596 | M&L for preparing & polishingFD/MAP- II/02Sofa Chair single seater |
| 597 | M&L for preparing & polishingFD/MAP- II/02Sofa three seater |
| 598 | M&L for preparing & polishingFD- 224/ 283Table 900x600x760mm (3' x 2') with drawer |
| 599 | M&L for preparing & polishingFD- 284/ 55(M)Table 900x600x760mm (3' x 2') without drawer |
| 600 | M&L for preparing & polishingFD- 291Table 900x900x760mm (3' x 3') |
| 601 | M&L for preparing & polishingFD- 293Table 600x600x760mm (2' x 2') |
| 602 | M&L for preparing & polishingFD- 248 FD- 276Table bed side |
| 603 | M&L for preparing & polishingFD- 235 FD- 274Table centre |
| 604 | M&L for preparing & polishingFD/MAP- II/03Table dining 4 person |
| 605 | M&L for preparing & polishingFD/MAP- II/03Table dining 6 person |
| 606 | M&L for preparing & polishingFD/- 239/ 273Table dining 6 person |
| 607 | M&L for preparing & polishingFD- 2139Table 5' x 2'-10\\" |
| 608 | M&L for preparing & polishingHFD- 2054Table 6' x 3'-6\\" |
| 609 | M&L for preparing & polishingFD- 239/273Table dining 8 person |
| 610 | M&L for preparing & polishingFD/MAP- II/03Table dining 8 person |
| 611 | M&L for preparing & polishingFD- 230Table dressing gents |
| 612 | M&L for preparing & polishingFD- 251Table dressing ladies |
| 613 | M&L for preparing & polishingFD/MAP- II/07Table dressing ladies Map with stool |
| 614 | M&L for preparing & polishingDB- 4120Table office cleark |
| 615 | M&L for preparing & polishingFD- 1010Table 1520x860x760mm |
| 616 | M&L for preparing & polishingDB- 249/275Table writing/ table writing medium |
| 617 | M&L for preparing & polishingDB- 278/232Teapoy |
| 618 | Removing dents, bends welding to broken portion rectifying all minor defects and repairs. Material and labour for preparation of new and old steel surface (inside & outside surface) including doors shelves and legs. Providing 1st class glossy finish synthetic enamel spray paint (Colour approved by GE) obtaining optimum glossy finish surface over a coat of red oxide primer wherever required . Make:- Asian / Berger / Jenson & Nicholson / Shalimar. |
| 619 | FD/E6/MAP/18Almirah large Steel 1/2 H 1/2 shelves (In dule tone Colour approved by GE)) |
| 620 | FD/E6/MAP/18Almirah large Steel 1/2 H 1/2 shelves (Outside Only) |
| 621 | FD-67(M)/1031Almirah large Steel with shelves |
| 622 | FD-67(M)/1031Almirah large Steel with shelves (Outside Only) |
| 623 | FD-67(M)/1031Almirah large Steel with shelves (In Dule tone colour approved by GE) |
| 624 | FD-67(M)/1032Almirah Midium Steel with shelves |
| 625 | FD-67(M)/1032Almirah Midium Steel with shelves (Outside only) |
| 626 | FD-67(M)/1032Almirah Midium Steel with shelves (In Dule tone colour approved by GE) |
| 627 | FD- 1033Almirah large Steel 1/2 H 1/2 shelves (In dule tone Colour approved by GE)) |
| 628 | FD- 1033Almirah large Steel 1/2 H 1/2 shelves (Outside Only) |
| 629 | FD- 1034Almirah Med Steel 1/2 H 1/2 shelves (In dule tone Colour approved by GE)) |
| 630 | FD- 1034Almirah Med Steel 1/2 H 1/2 shelves (Outside Only) |
| 631 | FD/E6/MAP/08(R) Bed Hard IP Plytop |
| 632 | FD-1028/TPBook case steel (Outside only) |
| 633 | FD-1028/TPBook case steel (In dule tone Colour approved by GE)) |
| 634 | FD- 75(M)Chair CB steel with arms |
| 635 | FD- 75(M)Chair CB steel without arms |
| 636 | TPChair Visitor |
| 637 | FD/E6/MAP-II/05Chair School with Hand Board |
| 638 | FD/E6/MAP/12Chair writing |
| 639 | FD- 388 (R) Charpoy Folding IP |
| 640 | FD/MAP- II/02Charpoy IP Hardtop |
| 641 | FD- 1038Rack Six tier steel |
| 642 | FD- 220FMN set for Charpoy |
| 643 | FD- 107/1021Desk Steel |
| 644 | FD- 1029Locker bed side steel |
| 645 | FD- 1029Locker bed side steel (outside Only) |
| 646 | FD- 1029Locker bed side steel (In dule tone Colour approved by GE)) |
| 647 | Fd/E6/MAP/02(R) Rack shoe Steel |
| 648 | FD-81(M)/409Stool steel |
| 649 | FD- 97(M)Side rack with tray FD-97(M) |
| 650 | FD/E6/MAP/15 (R) Table Bed Side |
| 651 | FD-84 (M) /1003Table office Officer steel |
| 652 | FD-84 (M) /1003Table office Clerk steel |
| 653 | FD- 165Table dining Ors Steel |
| 654 | FD- 1009Table 900x900mm Steel |
| 655 | FD- 1008Table 900x600x760 with Drawer steel |
| 656 | FD- 1009Table 900x600x760 without Drawer steel |
| 657 | FD/E6/MAP/17Teapoy Varandah |
| 658 | TPRack Size 6'x8'x3.2' |
| 659 | TPRack Enclosed 3mx1mx3m |
| 660 | FD- 69(M)Book shelf open Large steel |
| 661 | Schedule of credit amount of Rs 110526.25 to be deducted during AOC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender