Tender For Provn Of Guard Room And Certain Other Works Under Age B/R Iii At Chandimandir
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Nov 2026
10 days left
EMD
87300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Guard Room And Certain Other Works Under Age B/R Iii At Chandimandir
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n.exc 15cm deep in any type of soil complete all as specified and directed |
| 2 | Excavation in trenches in any type of soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc. or for shafts, wells cesspits, manholes, pier hole etc. and getting out, complete all as specified. |
| 3 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified. |
| 4 | Removal excavated soil to a distance exceeding 50 metre but n.exc 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified & directed. |
| 5 | providing cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate, as in foundations, filling and mass concrete etc., complete all as specified and as directed |
| 6 | Reinforced cement concrete, type A-1, 1:1½:3 (nominal mix), using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 7 | Reinforced cement concrete, type A-1, 1:1½:3 (nominal mix), using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 8 | Reinforced cement concrete, type A-1, 1:1½:3 (nominal mix), using 20mm graded crushed stone aggregate) as in Chajja and similar works, all as specified. Note : Reinforcement and form work shall be measured and paid separately |
| 9 | Reinforced cement concrete, type A-1, 1:1½:3 (nominal mix), using 20mm graded crushed stone aggregate)as in Beams, cantilevers, bressummers, lintels over 1.5m span , all as specified and directed. |
| 10 | Reinforced cement concrete type A-1, 1:1½:3 (nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 11 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , all as specified and directed. |
| 12 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surface of flat concrete complete all as specified and directed. |
| 13 | Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified. |
| 14 | Form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed. |
| 15 | Form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20cm wide and side of RCC / PCC bends in walls , horizontal or sloping and similar work. |
| 16 | MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 17 | Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally as in stirrups for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified & directed. |
| 18 | Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 19 | Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed. |
| 20 | Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed. |
| 21 | Rendering 15mm thick in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 22 | Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 23 | Rendering 15mm thick in Cement and Sand mortar 1:4 over fair faces of brick / concrete ,finished even and smooth without using extra cement, using water proofing compound, including necessary scaffolding & safety arrangement for plaster upto & including 4 storey building complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 24 | Rendering 5mm thick in CM 1:3 on fair faces of concrete/brick surfaces as in ceiling, chajja, facia or similar positions , finished fair and smooth complete all as specified and directed. |
| 25 | Earth filling under floor including spreading and levelling in in layers n.exc 25cm thick complete all as specified & directed. |
| 26 | Hard core of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed. |
| 27 | 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. |
| 28 | 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. |
| 29 | Plinth protection 75 mm thick Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate finished even and fair over 75mm hard core laid to slope of 1 in 12. It shall be laid in alternate bays, each bay not to exceed 2.5 m in length including making expansion joint 7 filling with mastic bitumen, Complete all as specified and directed. |
| 30 | 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and fair complete all as specified and directed. |
| 31 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 32 | Vitrified ceramic tile Dark Shade 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick cement mortar (1:6) screed bed for floor finishes complete all as specified. |
| 33 | Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 34 | Glazed ceramic coloured tiles of size 300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over and including 10 mm thick bedding layer in CM 1:4 complete all as specified and directed. |
| 35 | 20mm thick Granite work (of any type table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, set in 20mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite compelte including moulding on front edge all as specified and directed. |
| 36 | Kota Stone Slab flooring, 18-20mm thick (one piece), best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed. |
| 37 | Supply only integral water proofing compound complete all as specified & directed. |
| 38 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, including taking down old existing frame all complete as per architectural drawings and the directions of Engineer-in-ChargeNote :-(i) Weight of the aluminium section only shall be measured and paid.(ii) Aluminium doors/ window/ventilator to be fixed to jambs with cadmium plate screw(iii) The rate shall be inclusive or neoprene beadings, handles, hinges, screws etc weight of fittings/ fixture will not be measured for arriving the weight of aluminium section.(iv) Glass panes and panels shall be measured & paid separately under respective items. Design shall be approved from Engineer-in-Charge. |
| 39 | 4 mm thick ordinary quality sheet glass, and glazing with oil putty in square / rectangular n. exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 40 | Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed. |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge |
| 42 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 43 | Pressed steel frame for doors with single rebates of size 125 x 60mm including necessary fixing lugs/hold fasts, hinges, lock strike plate, including filling hollow frame with PCC (1:3:6), etc. (thickness the sheet is 1.25 mm), (cost of hinges & shop coat primer included), complete all as specified & directed. |
| 44 | Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed. |
| 45 | 35mm thick of second class hard wood glazed and Skeleton shutter open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc.; Size of members of shutters as specified in SSR Part 1, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 46 | Mild steel butt hinges, 100mm long fixed to steel chowkhats by welding, bolting, riveting etc, complete all as specified & directed. |
| 47 | 150 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 48 | 150 mm aluminium handles cast type complete all as specified and directed. |
| 49 | Aluminum alloy, anodized, sliding door bolt 300mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 50 | 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as spcified and directed. |
| 51 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 52 | Preparation of new plastered surfaces of ceiling and applying three coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 53 | preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 54 | Two coats of synthetic enamel paint on steel surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 55 | Preparation of new surfacs and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 56 | RCC pipes class NP2 200mm dia bore, with collars, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed. |
| 57 | Plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including cradle of pipe, haunching against pipe after the pipes are laid and tested , complete all as specified and directed. |
| 58 | PVC (SWR) rain water pipe, 75mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2, , fixed to wall or in floors, complete all as specified and directed. |
| 59 | PVC (SWR) rain water pipe, 110mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2, , fixed to wall or in floors, complete all as specified and directed. |
| 60 | 75mm bore PVC (SWR) bend with access door any radius complete all as specified and directed. |
| 61 | 110mm bore PVC (SWR) bend with access door any radius complete all as specified and directed. |
| 62 | PVC (SWR) floor trap 75mm bore, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 63 | PVC (SWR) floor trap 110mm bore, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 64 | Steel water tubes, 15mm dia bore, medium grade, galvanized, with and including all fittings and fixed complete to walls ceiling or laid in floors, including cutting chases and making good in cement mortar 1:3 complete all as specified and directed. |
| 65 | Steel water tubes, 20mm dia bore, medium grade, galvanized, with and including all fittings and fixed complete to walls ceiling or laid in floors, including cutting chases and making good in cement mortar 1:3 complete all as specified and directed. |
| 66 | Vitreous china squatting pan \\"orissa\\" pattern, size 580 x 440 mm white, with integral foot rest including 'P' or 'S' trap, flush pipe (excluding flushing cistern) and making good to the floor complete all as specified & directed by Engineer-in-charge. |
| 67 | Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including PVC seat cover complete all as specified and directed as . |
| 68 | PVC valve less syphonic action flushing type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat pedastal pattern , complete all as specified & directed. |
| 69 | Vitreous China Urinal, Half stall type, white and including flushing cistern, flush pipe and waste pipe,complete all as specified & directed |
| 70 | Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete, all as specified and directed. |
| 71 | Bib tap, fancy type cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 72 | Wall mixer, mix for mixing hot or cold water, chromium plated suitable for 15mm bore GI pipe or union, complete all as specified and directed. |
| 73 | PVC connections 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed. |
| 74 | Towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), complete all as specified and directed. |
| 75 | Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, complete all as specified and directed |
| 76 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 77 | Stop valve, concealed type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 78 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, complete all as specified and directed. |
| 79 | Gun metal valve 20mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, complete all as specified and directed. |
| 80 | health faucet (ABS body) mild steel chromiu plated for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook incuding making connections and fixed in position, complete all as specified and directed. |
| 81 | 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, complete all as specified and directed. |
| 82 | Bevelled edge mirror size 600mm x 450 mm, 5mm thick of selected quality glass mounded on 5 mm thick PVC board fixed to wooden plugs with chromium plated brass screws and cup washer with aluminium channel of suitable section alround , all as specified & directed. |
| 83 | Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complte all as as specified and directed |
| 84 | 10mm thick rendering in Cement and Sand mortar 1:4 over roof slab finished even and fair mixed with water proofing compound, including dimantling of the existing roof slab / suken portion complete all as specified. (NOTE : WPC will be measrued and paid separately) |
| 85 | APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric laid over and including priming surfaces with primer of same manufacturer @0.400Litre/Sqm and laying APP membrane on Primed surface by torch application and sealing all joints and overlapping min 10cm, and applying a coat of blown grade hot bitumen 90/15 over the membrance @ 1.2 Kg/Sqm, applying two coats bituminous based aluminium paint @ 0.20 Kg/sqm over exposed APP sheet with complete all as specified & directed. |
| 86 | Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 87 | Treating the top surface of filled earth at the rate of 5 litres of emulsion per square Metre of surface complete all as specified and directed. |
| 88 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square Metre of surface area complete all as specified and directed. |
| 89 | Treating the backfill in contact with foundation at the rate of 7.5 litres ofemulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 90 | Treating the soil along the external perimeter of bldg below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 91 | Excavation in post holes (or similar hole) each in hard/dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed. |
| 92 | Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed. |
| 93 | Cement concrete type B-0, 1:2:4 using (12.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. (Cement concrete item shall be reinforced, where ordered. Reinforcement shall be measured and paid separately). |
| 94 | PCC (1:3:6) type C-20 using 40 mm graded stone aggregate as in surface channels, benching and drains complete all as specified and directed. |
| 95 | Factory made Precast RCC manhole covers of size 600mm x 1200mm, 80mm thick with plain faces, including reinforcement and MS frame, set in position in cement mortar 1:4 complete all as specified. |
| 96 | Framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work confirming to Fe-290, Gde-E-190 complete all as specified and directed. |
| 97 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified & directed by Engineer-in-Charge |
| 98 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 99 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 100 | Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed. |
| 101 | Demolition and breaking up drain pipes (Salt glazed ware etc) internal dia of pipe 200mm. Set in cement mortar including PCC packing in bed and hunching complete all as specified and directed (excavation and earth work shall be measured and paid separately). |
| 102 | Clearing and desilting of manholes of size n.exc 1.20m x 1.20m and depth n.exc 1.5m and removing the sludge to a distance exc 250m and n.exc 500m and depostied where directed in and including borrow pits and covering the borrow pits with 10 cms thick layer of soil, including pumping out liquid and liquid sludge if required , complete all as specified and directed. |
| 103 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, complete all as specified and directed. |
| 104 | Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar complete all as specified and directed. |
| 105 | Precast concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed |
| 106 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 107 | Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, over a coat of primer complete all as specified and directed. |
| 108 | Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed non metalic PVC conduit of suitable size but not less than 25mm dia with all fittings terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account. |
| 109 | All as per serial item 108 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed |
| 110 | All as per serial item 108 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed |
| 111 | All as per serial item 108 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor |
| 112 | Switch modular type (ISI marked), single pole, one way 6 Amps, one module (ISI marked), complete all as specified & directed. |
| 113 | Switch modular type (ISI marked), single pole, one way 16 Amps, one module (ISI marked), complete all as specified & directed. |
| 114 | Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose two module (ISI marked), complete all as specified & directed. |
| 115 | Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. |
| 116 | Modular switch type stepped fan regulator, single pole, 230 volt two module complete all as specified and directed. |
| 117 | Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge. |
| 118 | Lamp holder, PVC/Polycarbonate type with back plate modular type fixed on wall suitable for batten fitting ,complete all as specified and directed. |
| 119 | LED lamp 9 watts, B-22 type complete all as specified . |
| 120 | Sheet metal enclosure for double door vertical DBs made out of CRCA mild steel sheet surface with insulated material like polester with epoxy powder coated surface mounting VTPN 04 way 415 Volt ISI marked 250 Amps bus bar stove enameled dust and vermin proof, IP 54 protection, suitable for incorporation TP MCCB (V-tech) N3 frame upto 250 Amps, isolators and including connection with wire and cable etc complete all as specified and as directed by Engineer-in-charge. |
| 121 | MCCB 4 pole, 3 phase 415 volts of capacity 63 Amp, 16 KA with Ics = 100% Icu with adjustable thermal and magnetic release complete with proper copper thimble all as specified and directed. |
| 122 | MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 123 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp SP complete all as specified. |
| 124 | LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specified and directed. |
| 125 | LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 126 | Ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and provision of flexible copper cable 3 core from ceiling rose to fan complete all as specified and directed. |
| 127 | Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC conduit, complete all as specified and directed. NOTE : (i) Two runs of cable, one run of earth wire shall be considered as one running metre(ii) Cutting chases and PVC conduit will be measured and paid separtely(ii) colour code shall be Red for phase, Black for neutral and green for earth |
| 128 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed . |
| 129 | 25mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, Complete all as specified and directed . |
| 130 | LED building security light fitting 1 x 35 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection incl mounting bracket of suitable size and connection, complete all as specified and directed. |
| 131 | Electric water heater(vertical type geyser), capacity 25 litre, 2 KW BEE 5 Star rated AC single phase, including MS glass lined inner tank, glass coated heating element, high density PUF insulation, Anode rod protection, heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolts with all accessories such as safety valve, thermostat, NRV, connection piece, etc. making necessary inlet / outlet water connection, testing on load complete all as specified and directed. |
| 132 | Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways, complete all as specified & directed. |
| 133 | 32mm outer dia, double walled corrugated (DWC) HDPE duct pipe pipes of pressure rating 6 kgf/sq. cm conforming to IS 14930 Part-II with anti rodent and non flame propogating properties of approved colour with fittings for cable protection from approval make complete , all as specified and directed |
| 134 | Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm, 3.5 core, laid in trenches , sleeving through pipes of fixed on poles & wall or laid under floors inlcuding jointing with suitable size of alumunium lugs as specified and directed. |
| 135 | Supply, installation, commissioning of water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/40 litres complete all as specified and directed. MAKE : LG / VOLTAS / BLUE STAR / SAMSUNG / WHIRLPOOLNOTE : Manufacturer's warranty shall be provided by Contractor |
| 136 | Supply and installation evaporative desert coolers (steel body) factory made 22/24 gauge PGI sheet of size100x70x60cm appx, front and side panels are made of same gauge with wood wool pad shaving nominal air flow capacity of 4000 cfm, or nearest size, having exhaust fan motor with copper winding of capacity 280 to 310 watt with18” steel blade size, and submersible pump of capacity 1.5m head , and powder coated, with all fittings and fixtures as directed by ENG-IN-CHARGE complete all as specified and directed.Note :- The rates are included of material and labour for Fabrication cooler stand of size 60x70x80cm ( LxWxH) angle iron of 35x35 x 5mm as directed conforming to Fe-290Gde E-165, including cutting, welding, cross support in upperside and lower side with flat iron or angle iron of 35x35x5 etc, two coats synthetic enamelpaint over one coat redoxide primer, installed in location complete all as specified and directed. |
| 137 | Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified. |
| 138 | Exhaust fan, steel body AC single Phase. 230V of size 300mm sweep , 1400 rpm, heavy duty with, blades, and frame and louvers including grouting nuts, fastners and provision of flexible coper cable 3 core from ceiling rose to exhaust fan complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender