Tender For Repair/Resurfacing Of Perimeter Road Work From Lalgaon Gate To 154 Hu Under Ge (Af) Srinagar
Tender Value
49.95 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
11 days left
EMD
99900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Resurfacing Of Perimeter Road Work From Lalgaon Gate To 154 Hu Under Ge (Af) Srinagar
BOQ
| Sl. No. | Item Description |
| 1 | Scarify or picking graveled, macadam or bituminous macadam surfaces in area not exceeding 400 Square metre ( exceeding 50 mm but n exc 100mm deep) including removing the material to a distance not exceeding 50 metre and stacking complete all specified and directed. |
| 2 | Repair to pot holes any depth not exceeding 1.0 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm the depth, making good by applying tack coat @ 5 kg per 10 sq m, putting in screened & graded road metal, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded well rammed (including supply of road metal, binder and chippings).depth of potholes exc 30 mm complete all as specified and directed |
| 3 | Laying and compacting 75 mm thick (compactedthickness) Wet Mix Macadam (WMM) grading as petable 400-13 of MORTH specifications for Road andBridge works 2013 manufactured in WMM plantmaterial comprising of clean, crushed, gradedaggregate and granular material premixed with wateto a dense mass, spreading with sensor paver androlling with vibratory roller of capacity 80-1 OOKNstatic weight and consolidating to required gradienand camber complete all as specified and directedThe finished surface tolerances to be as per Table900-1 of MORTH specifications for Road and Bridgeworks 2013 |
| 4 | Preparing Wet Mix Macadam (WMM) surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc, applying evenly a priming/ tack coat with bituminous primer using paving bitumen (VG-10) at 10 kg per 10 sq metre of road complete all as specified and directed. |
| 5 | M&L for premix bituminous macadam with 4% paving using bitumen VG-30 paving grade(50-70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated avg 50 mm thickness) up to maximum 75mm or less with 8 to 10 tonne power roller, complete all as specified and directed complete all as specified and directed |
| 6 | M&L Applying evenly a priming with bituminous primer using paving Bitumen VG-10 @ 2.5 Kg/10 Sqm over bituminous macadam surfaces,complete all as specified and directed. |
| 7 | M&L for Preparing black top surfaces brushing with wire brushes for removing caked mud etc, sweeping with brooms as and finally fanning the cleaned surface with gunny bag to remove all loose dirt’s etc and applying evenly a priming tack coat with tar boiler or cold emulsion as per weather condition with sprinkler (site requirement) on existing black top surfaces with paving bitumen primer using bitumen VG-10 paving grade(80-100 penitration) @ 5 Kg/10 Sqm complete all as specified and directed |
| 8 | M&L for Bituminous VG-30 premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient rolling/compacted with 8 to 10 tonne power roller, complete surface complete all as specified and directed. (To be prepared in hot mix plant and to be laid through machanical paver.)Note :-(a) preparation of mix in hot mix plant,spreading by self propelling mechanical paver and rolling and compection by set of rollers as specified in PS shall be camed out. Hot mix plant may be installed at any distance but the Contractor shall be responsible for maintaning the required temarature of mix under all conditions till it is laid and compected and. unit rate against these items shall be include for carrying and no delay in completion of work shall be acceptable on this account. |
| 9 | S&F in repair Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 10 | S&F in repair Solar cat eye (Solar Stud) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed |
| 11 | S&F in repair Cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 12 | Marking lines, dashes, arrows etc of width not exc 10 cms on black top/ concrete surfaces of road using hot applied thermo plastic road marking paint 2.5 mm thick (white/ gold, yellow) mixed with radium glass beads @ 250gm/ Sqm with automatic machine to provide reflectivity and night vision (approx temp being 200°C at the time of laying) including cleaning the surface of all dirt, dust and other foreign material complete all as specified. Note:- Road marking lines at the centre of road shall not be continuous, whereas the lines at outer sides of road shall be continuous i.e in one length. |
| 13 | M & L for continous brick edging with burnt clay bricks of sub class B modular brick with width equal to width of the brick of locally available best quality laid dry on end vertically including taking out old brick edging all as specifed and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender