Tender For Certain Repair To Boundary Wall, Fencing & Compound Wall And Other Misc B/R Works In The Aor Of Age B/R-I Under Ge Dipatoli
Tender Value
49 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
17 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Boundary Wall, Fencing & Compound Wall And Other Misc B/R Works In The Aor Of Age B/R-I Under Ge Dipatoli
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including taking out embedded portion and making good disturbed ground all as directed |
| 2 | Dismantling fencing wire mesh, any type complete all as directed |
| 3 | Excavation in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface all as directed |
| 4 | M&L for PCC Type B-2 (1:2:4) using 40 mm graded stone aggregate in foundation filling and packing of fencing post or other works complete all as spcified & directed |
| 5 | M&L for mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embeding in concrete and screws etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron filets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 6 | M&L for 5 to 10 mm dia mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm but n. exc. 10 cm long complete. |
| 7 | S&F Chimney bars (straight or camber) : bearing bars; tongues or water bars for window frames, window guard bars, bars for chain link fencing plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 8 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified. |
| 9 | Supply only chain link MS galvanised fencing, any size or type as directed by Engr-In-Charge.(Weight of chain cover fency shall be ascertained by B.O.O) |
| 10 | M & L for preparation of new steel surfaces of any description over 10 cms in width or girth not otherwise described and apply two coat of synthetic enameled paint over a coat of red oxide zinc chrome primer as specified & directed |
| 11 | Demolition of Brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as directed by Engr-in-Charge. |
| 12 | M&L for brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6). complete all as specified and as directed by Engr-in-Charge. |
| 13 | All as per Item No 12 here in before (Old bricks obtained from Item No 11 shall be used) |
| 14 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.all as directed |
| 15 | M&L for rendering 15 mm thick in cement mortar 1:4 on wall of brick work or concrete surface, finished fair and even all as specified and directed. |
| 16 | Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer complete all as specified & directed. |
| 17 | M&L for preparing the old surfaces by complete removel of existing treatment and applying three coats of cement bsed paint on walls complete all as specified & directed. |
| 18 | Complete removal of existing treatment on wall of any height of bldigs by brooming down with wire brushing, stoping and applying two coats of exterior weather coat/ plastic emulsion under one coat of primer by mechanical applicator, complete all as specified and as directed by Engr-in-Charge |
| 19 | M&L for wild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 Gde E-250 |
| 20 | M & L for 18-20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite. complete all as specified & directed |
| 21 | M&L for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mmx250mmx7mm /450x350x7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and as directed by Engr-in-Charge. |
| 22 | S&F galvanised stand steel barbed wire 2.24 mm dia barbed with 2mm dia barbes at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line of wire to be measured seperately) |
| 23 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as directed |
| 24 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 25 | S&F 60 mm thick Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 26 | All as per item no 25 here in before but except pavor block (Pavor Block shall be used obtained from Item No 28 here in after |
| 27 | Supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 Mm thick in each layer complete all as specified & directed |
| 28 | Dismantling floor hearth or wall tiling, interlocking paver block/chequered cement concrete tiles including cement mortar bedding ( but not backing) removing serviceable tiles and rubbish off the premises all as directed |
| 29 | M&L for coloured chequered cement concrete tiles 20cmx20cmx25mm thick with gray cement and pigment, set,jointed and pointed in neat cement slurry in floors including 15mm thick screedbed in CM 1:6 all as specified and directed |
| 30 | M & L for Providing precast cement concrete louvres and jallies, type C0 (1:3:6) (12.5mm graded stone aggregate) set in Cement mortar 1:4, 25mm thick (measured solid), in-cluding all mould- ings but excluding frame (Pre cast frame shall be measured and paid separately) S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender