Tender For Repair To Various Wooden And Steel Furniture Bed Hard Ply Top, Bed Hard Steel Map, Paint And Polishing Under Ge (West) Bareilly
Tender Value
46 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
15 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Various Wooden And Steel Furniture Bed Hard Ply Top, Bed Hard Steel Map, Paint And Polishing Under Ge (West) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work : REPAIR TO VARIOUS WOODEN AND STEEL FURNITURE BED HARD PLY TOP, BED HARD STEEL MAP, PAINT AND POLISHING UNDER GE (WEST) BAREILLY Contract No : CWE BLY/ GE(W)/ 97 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Bed Hard SteelFD/E6/MAP/08/(R) |
| 3 | (i) Removing the old unserviceable ply from Bed hard steel Iron and S&F new ply wood 1980x850x12mm thick, BWP as approved by GE, fix with mild steel galvonized iron nuts and botls of 6mm dia and PVC edging (25x25mm) shall be placed around the ply complete all as specified and directed. |
| 4 | (ii) Replacment of u/s hard rubber shoe of best quality as approved . |
| 5 | (iii) Removing the old unserviceable pre-laminated particle board from head rest of bed hard steel and S&F the new MDF pre-laminated board of exterior grade of size 630x200x18mm with PVC edging of size 25x25mm around the board. |
| 6 | (iv) Removing the old unserviceable pre-laminated particle board from foot rest of bed hard steel and S&F the new MDF pre-laminated board of extterior grade of size 630x280x18mm with PVC edging of size 25x25mm around the board. |
| 7 | Provide additional 4 nos stiffiner in each bed hard (Trade pattern) , properly bended to 'L' shape of size 824x25x4mm thick and welded to bottom side of bed hard to support the long rail& head/foot rest. Rest all as specified and directed by Engr-in-charge. |
| 8 | (v) Cleaning the all steel surfaces by using various type abrasive cloth emery and applying two coat of spray painting with synthetic enamel paint (Black) over a coat of red oxide primer up to a glossy finish complete. |
| 9 | (vi) Removing of dents& bends then welding wherever required . Rest all as per directed by Engr-in-charge. |
| 10 | CHAIR SCHOOL W/HAND BOARDFD-E6/MAP/05 |
| 11 | (a) Replacement of old u/s hand board and S&F new hand board made of 18 mm thick both side prelaminated teak faced MDF board of size 300x585mm with PVC edging all round the top & fixed with suitable screws complete. |
| 12 | (b) Replacement of unserviceable & deficient 20mm dia MS rod welded to 25mm dia MS rod duly two coats of synthetic enamel paint 1st grade over a coat of red oxide primer to fix the hand board complete. |
| 13 | (c ) Removing one piece of PVC seat & back from Chair school with hand board and S&F a new PVC seat & back ISI Marked.Make: Nilkamal/ Cello/ Italica/Suprim/AMKO. |
| 14 | (d) Replacement of unserviceable rubber shoes as per existing one. |
| 15 | (e) Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and apply putty as required and applying two coats of synthetic enamel paint 1st grade over a coat of red oxide primer of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade as directed. |
| 16 | (f) Removing the dents , bends and welding wherever required , complete all as specified and directed by Engr-in-charge. |
| 17 | BED HARD PLY TOPFD-246 |
| 18 | (a) Replacement of unserviceable ply wood both sides of head rest with 3.5 to 4 mm thick ply wood one side teak faced matching with the shade of existed of ply The ply wood shall be confirming to ISI as approved, 12 mm thick half cut TW beading including provision for MNF set with brass screw round head 25 mm long to be provided. |
| 19 | (b) All as per item No 3.01 above but foot rest. |
| 20 | (c ) Replacement of unserviceable long rail with 1st class well seasoned H/W Teak/ Shisham wood of required shape & size as per drawing. |
| 21 | (d) Taking down the existing unserviceable broken legs of head/ foot rest and S&F new legs of Ist class hard wood teak/ shisham wood. |
| 22 | (e ) Taking down the existing unserviceable head rest (including legs) of Bed Hard and S&F new head rest complete made of Ist class shisham wood. |
| 23 | (f) All as per item No 3.05 above but foot rest. |
| 24 | (g) Taking down existing unserviceable ply top from the Bed Hard and S&F new BWP plywood top as approved by GE, suitable to the bed, 12 mm thick. Rest all as specified and directed by Engr-in-charge. |
| 25 | (h) Replacement of unserviceable stiffener made of 1st class hard wood (SAL) of size 40 x 60 mm of required size/length. |
| 26 | (j) Tightening of complete bed hard with the support of bamboo pins , bracket and fevicol as per trade practice. Rest all as specified and directed by Engr-in-charge. |
| 27 | (j) Preparation of surfaces of bed hard bying and removing of old polished surface by using fine sand paper, Grinder, abbressive cloth emery paper and preparation of surfaces by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of melamine polish Melamine polish (Make: Asian/Nerolac /Jivanjor) glossy finish with spray machine after preparation of surface applying filler/shellac etc. as approved and directed by Engr-in-Charge. |
| 28 | Scraping and removing of old polished surface by using fine sand paper, Grinder ,abbressive cloth emery paper and preparation of surfaces by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of melamine polish (charcoal) on exposed surface to achieve high class finish as per existing shade, complete all as directed by engineer-in-charge for the following wooden furniture items :-. |
| 29 | Bed hard double bedTP |
| 30 | Chair Dining cushioned with high backTP |
| 31 | Chair writing cushioned/ Chair multipurpose cushionedTP |
| 32 | Rack shoe with closed shutterTP |
| 33 | Side board multipurposeTP |
| 34 | Sofa set 4 seaterTP |
| 35 | Sofa set 5 seatsTP |
| 36 | Table dining 8 personsTP |
| 37 | Table writing with glass topTP |
| 38 | Table centre with glass topTP |
| 39 | Table bed sideTP |
| 40 | Table peg with glass topTP |
| 41 | M&L for replacement of unserviceable glass top(12 mm thick) of following items all as specified and shown on drawings. All fixing and finishing etc shall be done in accordance with the standard workmanship, drawings and as directed. The glass shall be cut as per directed by Engr-in- charge. |
| 42 | Table dining 8 personsTP |
| 43 | Table pegTP |
| 44 | Table centreTP |
| 45 | Table writingTP |
| 46 | CHAIR DiningFD/E6/MAP-II/04 |
| 47 | Removing old unserviceable front leg and S&F new leg as per existing shape & size and drg. |
| 48 | Removing old unserviceable rear leg and S&F new rear leg as per existing shape & size and drg. |
| 49 | Removing old unserviceable front rail and S&F new front rail as per existing shape & size and drg. |
| 50 | Removing old unserviceable rear rail and S&F new rear rail as per existing shape & size and drg. |
| 51 | Removing old unserviceable side rail and S&F new side rail as per existing shape & size and drg. |
| 52 | Removing old unserviceable stiffener and S&F new stiffener as per existing shape & size and drg. |
| 53 | Removing old unserviceable verticle strip of back rest and S&F new verticle strip as per existing. |
| 54 | Removing old unserviceable stopper and S&F new stopper as per existing shape & size and drg. |
| 55 | Removing old unserviceable top rail of back rest and S&F new top rail as per existing shape & size and drg. |
| 56 | Removing u/s upholstery of seat complete as per existing shape & size and drg ( Rate not less than Rs 450.00/RM). And supply of new upholstery for seat as per drg and as directed by EIC. |
| 57 | Removing u/s cushioned upholstered seat and S&F new cushioned upholstered PU foam seat complete of size 75mm thick, Make: sleepwell, Product- Primo Cool/ Kurl-on, ProductGold line plus/ Godrej )40 density screwed to 12mm thick BWP plywood as per existing shape & size and drg ( Tapestry cloth Rate not less than Rs 450.00/RM). |
| 58 | Removing u/s hard rubber shoes and S&F new hard rubber shoes rest as per existing shape & size and drg. |
| 59 | Supply of L-shape SS angel bracket (size 1.5\\"x1.5\\") having 4 nos of holes screwed with each leg for chair dining in lieu of 75x75x25 teak wood stopper (04 nos) as specified by Engr-in-Charge. |
| 60 | Tightening of complete frame with the support of bamboo pins and fevicol as per trade practice. Rest all as specified and directed and Preparation of surfaces of chair dining bying and removing of old polished surface by using fine sand paper, Grinder ,abbressive cloth emery paper and preparation of surfaces by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of melamine polish Melamine polish (Make: Asian/Nerolac /Jivanjor) glossy finish with spray machine after preparation of surface applying filler/shellac etc. as approved and directed by Engr-in-Charge. |
| 61 | S&F new frame of Chaie dining containing 04 rear and front legs, 02 front and rear rail, 02 side rail, 04 Verticle strip, 01 top rail back side with leg stiffener. |
| 62 | CHAIR WRITING (STEEL)FD-E6/MAP/12 |
| 63 | Replacement of arm rest of chair writing S&F new arm rest made of polyurethen,black integrated scratch & weather proof skin with MS insert as per sample complete. |
| 64 | S&F new superior quality cover cloth covering seat and back with PVC Lipping all around complete of various Chairs with best quality Fabric as approved by GE. Rest all as shown on drg and directed by Engr-in-Charge (Range of fabric not less than Rs 300 per RM). |
| 65 | Replacemrnt of old/unservicable Seat & Back both complete of various Chairs made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per specified & shown in drawings & directed. |
| 66 | Taking down u/s MS flat iron stiffener and S&F new MS flat iron stiffener of existing shape & size as per drawing complete all as specified and directed. |
| 67 | Tightening of compete frame with suitable machine screws as per existing size (including handle) , Welding ,removing dents & bends wherever required and cleaning all steel surfaces of various chairs thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed. |
| 68 | CHAIR CB STEELHFD-2044 |
| 69 | S&F new superior quality cover cloth covering seat and back with PVC Lipping all around complete of various Chairs with best quality Fabric as approved by GE. Rest all as shown on drg and directed by Engr-in-Charge (Range of fabric not less than Rs 300 per RM). |
| 70 | Replacemrnt of old/unservicable Seat & Back both complete of various Chairs made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per specified & shown in drawings & directed. |
| 71 | Taking down u/s MS flat iron stiffener and S&F new MS flat iron stiffener of existing shape & size as per drawing complete all as specified and directed. |
| 72 | Tightening of compete frame with suitable machine screws as per existing size (including handle) , Welding ,removing dents & bends wherever required and cleaning all steel surfaces of various chairs thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed. |
| 73 | CHAIR CBA STEELHFD-2045 |
| 74 | Replacement of arm rest of chair writing S&F new arm rest made of polyurethen,black integrated scratch & weather proof skin with MS insert as per sample complete. |
| 75 | S&F new superior quality cover cloth covering seat and back with PVC Lipping all around complete of various Chairs with best quality Fabric as approved by GE. Rest all as shown on drg and directed by Engr-in-Charge (Range of fabric not less than Rs 300 per RM). |
| 76 | Replacemrnt of old/unservicable Seat & Back both complete of various Chairs made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per specified & shown in drawings & directed. |
| 77 | Taking down u/s MS flat iron stiffener and S&F new MS flat iron stiffener of existing shape & size as per drawing complete all as specified and directed. |
| 78 | Tightening of compete frame with suitable machine screws as per existing size (including handle) , Welding ,removing dents & bends wherever required and cleaning all steel surfaces of various chairs thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed. |
| 79 | CHAIR EXECUTIVE (REVOLVING) EESY-235/318TP |
| 80 | Replacement of arm rest made of polyurethen,black integrated skin with MS insert as per existing shape& size . |
| 81 | Replacement of twin wheel Castor 50mm dia as per sample |
| 82 | Replacement of Peddestrial assembly containing twin wheel castor made of PVC injection moulded in black as per sample. |
| 83 | S&F new superior quality cover cloth covering seat and back with PVC Lipping all around complete of various Chairs with best quality Fabric as approved by GE. Rest all as shown on drg and directed by Engr-in-Charge (Range of fabric not less than Rs 300 per RM). |
| 84 | Replacemrnt of old/unservicable Seat & Back both of complete Chair made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per sample & directed. |
| 85 | Replacement u/s hydraulic assembly and S&F new hydraulic assembly complete (except peddestrial assembly) as per existing shape and size. |
| 86 | Tightening of compete frame with suitable machine screws as per existing size (including handle) , Welding ,removing dents & bends wherever required and cleaning all steel surfaces of various chairs thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed. |
| 87 | CHAIR COMPUTERFD/E6/MAP/01 |
| 88 | Removing unserviceable seat and back rest and S&F new adjustable back rest on 12mm thick Hot presed ply wood , upholstered with fabric and contoure lumber support for extra comfort with PVC lipping all around. Adjustable back rest shall consist of prolift mechanism and can be locked in 5 steps for better lumber support . |
| 89 | Replacement of u/s parts of synchro tilting set up. |
| 90 | Removing u/s seat and S&F new seat as per existing shape and size. |
| 91 | Replacement of upholstery of seat & back with Fabric best quality as approved (Rate of fabric not less than Rs 300 per RM). |
| 92 | Removing u/s handle and S&F new handle having black integral skin, polyurethane reinforced with MS insert. It shall be scratch and weather rasistance. |
| 93 | Replacement u/s hydraulic assembly and S&F new hydraulic assembly as per existing shape and size . |
| 94 | Replacement of twin wheel Castor as per existing shape and size. |
| 95 | Revoming u/s padestal assay with wheels and S&F new padestal assay with wheels, having 600mm pitch centre dia and a 10.05mm dia forged bright zinc plated MS castors pin is of press fitted into each prong for holding the castors as per specified and directed. |
| 96 | Tightening of compete frame with suitable machine screws as per existing size (including handle) , Welding ,removing dents & bends wherever required and cleaning all steel surfaces of various chairs thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender