Tender For Provision Of Drone Protection Nets For Blast Pens At Af Stn Srinagar
Tender Value
73.37 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
25 days left
EMD
1.35 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Drone Protection Nets For Blast Pens At Af Stn Srinagar
BOQ
| Sl. No. | Item Description |
| 1 | M&L in repairs for 6 mm dia SWR galvanized steel wire rope 6*19 tensile strength 1770 N/MM2 connected to hook etc, complete all as directed and specified |
| 2 | S&F In repair of mild steel wire rope clamp 8 mm with two bolt size for looping of wire rope, complete all as specified and directed. |
| 3 | S&F in repair galvanised iron turn buckel of M-16 eye to hook type , body length 170-180 mm complete all as specified and directed. |
| 4 | S&F stainless steel curtain ring of 30 mm dia with hooks and round shape of thickness 2 mm complete all as specified and directed. |
| 5 | S&F in repair straining bolts/eye bolt of 16 mm dia including moulding to the required shape and with nut & washers, minimum length 300 mm conforming to FE-290 Gde-E-195 etc, completed all as specified and directed. |
| 6 | M&L for rolled mild steel work in Plates (plain or chequerred ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 410-W (gde-E-250) Quality B complete all as specified and as directed. |
| 7 | S&F FE-410-W (Gde e-250)quality B for Joist, channel, angle, or tee sections, fixed independently , without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) rolled sections Fe-410-W (Gde-W (Gde-E-250) qualty-B , as in framed work for connecting SWR Wires over blat pen main beams and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed. |
| 8 | M&L for rolled sections Fe-410-W (Gde-W (Gde-E-250) qualty-B , as in framed work for connecting SWR Wires over blat pen main beams and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed. |
| 9 | M & L Cement concrete Type D2 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete |
| 10 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 11 | M & L in repair for MS works as in holdfast, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging holdfasts, Grills, cladding and similar small articles conforming to Fe 290 Gde E-165, complete all as specified and directed by Engineer-in-Charge |
| 12 | M&L for 15mm thick rendering on fair faces on brick or concrete surfaces in CM 1:4, fair finished the surfaces even and smooth without using extra cement including scaffolding upto 12m height, complete all as specified and directed. |
| 13 | Preparation of new surface of wall and applying two coats of cement based paint over one coat of primer including scaffolding up to 15m height, complete all as specified and directed. |
| 14 | Excavation over area n exc 1.50 m deep and getting out in any type of soil complete all as specified. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 16 | Removing excavated material exc. 50 metre and depositing where directed at a level exc. 1.5 metre above the starting point, all as specified. |
| 17 | M&L for cement concrete in 1:4:8 (type D-2) using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified. |
| 18 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter, complete all as specified. |
| 19 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed . |
| 20 | M&L for Reinforced cement concrete M-30 (20mm graded agg) design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. |
| 21 | M&L reinforced cement concrete (design mix) M-30 using 20mm graded aggregate in,columns,pillars,piers,posts and struts etc.; basement slabs, under reamed piles and mass concrete |
| 22 | M&L TMT bar 10mm dia and over cut to length,bent to shape required incl cranking bending and binding with and including mild steel wire(annealed) not less then .9mm dia |
| 23 | All as per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 24 | Preparation of old painted steel and iron surfaces of any description not otherwise described exc 10cm width or girth by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots of roof /CGI Sheets, steel gates, steel doors, steel rolling shutters, steel eves boards etc. and applying one coat of synthetic enamel paint including scaffolding up to 15m height, complete all as specified and directed. |
| 25 | Complete removal of existing surface treatment from the old plastered surface of wall and applying two coats of exterior emulsion paint (weather coat) over a coat of exterior primer including scaffolding up to 15m height , complete all as specified and directed. |
| 26 | S & F anti Drone net made of 60 GSM High density polyethylene (HDPE) , UV Stabilized for outdoor use nylon wire THREAD/TWINE 3 mm thickness with mesh size 25 - 35 mm square holes aperature and installing hooks or brackets along edges, drape the net over them and secure with cable ties or clips & including intermidiate fixings every 5 m with run tensioning wire & clips and hinges through them including scaffolding up to 10 m height for fixing , complete all as specified and directed.( area of net will be measured flat between opening of blast pen) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender