Tender For Repair To Gi Pipe Charpoy Ply Top, Charpoy Ip Steel And Conversion Of Charpoy Gi Pipe Nylon Newar To Ply Top And Wooden Chair, Sofa And Various Traders Pattern Furniture Under Ge (West) Bareilly
Tender Value
48 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
17 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Gi Pipe Charpoy Ply Top, Charpoy Ip Steel And Conversion Of Charpoy Gi Pipe Nylon Newar To Ply Top And Wooden Chair, Sofa And Various Traders Pattern Furniture Under Ge (West) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work : REPAIR TO GI PIPE CHARPOY PLY TOP, CHARPOY IP STEEL AND CONVERSION OF CHARPOY GI PIPE NYLON NEWAR TO PLY TOP AND WOODEN CHAIR, SOFA AND VARIOUS TRADERS PATTERN FURNITURE UNDER GE (WEST) BAREILLY Contract No : CWE BLY/ GE(W)/ 96 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Charpoy GI Pipe ply topFD-220 |
| 3 | (i) Removing the old unserviceable ply top from Charpoy GI Pipe and tightening of all loose components, supply and fixing new ply wood 1980x900x12mm thick, BWP grade as approved by GE, duly sharp the all corners with mild steel galvonized iron nuts and bolts of 6mm dia compete all as specified and directed. |
| 4 | Charpoy GI Pipe Nylon NewarFD-220 |
| 5 | (i) Removing the old unserviceable nylon newar from charpoy GI pipe and tightening of the charpoy frame, check nuts and elbow as required and as directed by the Engineer-in-Charge and supply & fixing of new ply top having 4x rounded corners and size 1980x900x12mm thick, BWP grade as approved by GE, fixed with suitable machine screw & washer as approved in each charpoy through suitable drill machine holes of approriate size complete all as directed. |
| 6 | (ii) Removing the old unserviceable and broken flate iron stiffener size 900x25x4mm and S&F new flate iron stiffener of size 900x25x4 mm duly primer coated and two coat of black synthetic enamel paint, welded to GI charpoy pipe complete all as specified and directed. |
| 7 | (iii) Provide Long rail made of 32mm bore GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32mm size GI elbow of charpoy duly threaded complete all as specified and as directed. |
| 8 | (iv) Conversion of 32mm bore long rail obtained from dismantling of item sertial No iii above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32mm dia existing elbow complete all as specified and directed. |
| 9 | (v) Conversion of 32mm bore short rail obtained from taking down/dismantling of u/s leg charpoy dismantling of item No iv above into one legs including fixing to 3 way 32mm dia at one end threaded and cover the other end with hard rubber /PVC shoe alroung complete all as specified and directed. |
| 10 | (vi) Taking out of u/s and broken existing elbow 3 way from the charpoy and S&F new elbow 3 way of 32mm bore dia, medium weight, ISI marked complete all as specified and directed. |
| 11 | (vii) Taking out old unserviceable and broken existing checknuts from the charpoy and S&F new checknuts from the charpoy of 32mm before of medium weight complete all as specified and directed. |
| 12 | (viii) Taking out old unserviceable/ broken existing MNF clamps and S&F new conduit clamps made from 1.6mm thick mild steel sheet, two coat of black colour over a coat of red oxide primer, welded to legs as per existing. Rest all as per drawing complete. |
| 13 | Charpoy Double Bunk with hard topFD-GE(W)/01/2015 |
| 14 | (a) Removing the old unserviceable plywood top from Chaproy Double bunk and S&F new ply wood 1930x860x12mm thick, BWP grade as approved by GE, fix with mild steel galvonized iron nuts and botls of 6mm dia with suitable size compete all as specified and directed. |
| 15 | (b) Removing u/s particle board of side and S&F new MDF board side of required size as per drawing and as specified |
| 16 | (c) Removing u/s particle board of head & foot rest and S&F new MDF board head & foot rest of required size as per drawing and as specified |
| 17 | (d) Replacment of u/s hard rubber shoe of best quality as approved . |
| 18 | (e ) Ceaning the all steel surfaces by using various type abrasive cloth emery and applying two coat of spray painting with synthetic enamel paint (Black) over a coat of red oxide primer up to a glossy finish complete |
| 19 | (f) Removing of dents& bends then welding wherever required . Rest all as per directed by Engr-in-charge. |
| 20 | Charpoy steel IronFD/MAP-II/01 |
| 21 | (i) Removing the old unserviceable ply top from Chaproy steel Iron and S&F new ply wood 1930x860x12mm thick, BWP grade as approved by GE, fixed with mild steel galvonized iron nuts and botls of 6mm dia with suitable size compete all as specified and directed. |
| 22 | (ii) Cleaning the all steel surfaces by using various type abrasive cloth emery and applying two coat of spray painting with synthetic enamel paint (Black) over a coat of red oxide primer up to a glossy finish complete. |
| 23 | (iii) Replacment of u/s hard rubber shoe of best quality as approved . |
| 24 | (vi) Removing u/s cleat and S&F new cleat L shape shown on drg. |
| 25 | (vi) Removing u/s stiffener and S&F new stiffener size 25x25mmx16G MS Tube stiffener. |
| 26 | (ix) Removing of dents& bends then welding wherever required . Rest all as per directed by Engr-in-charge. |
| 27 | CHAIR CB STEEL WITH ARMS/WITHOUT ARMSFD-75 |
| 28 | (a) Replacement of unserviceable hard wood seat frame of S&F new seat frame Chair steel with arm with 1st class hard wood(sheesam/teak) seat frame of overall size shwon as per drg containing each arm of size 25mm thick & 50mm wide. , well finished duly polished with black colour. The holes for canning shall be @ 12.5mm c/c and canning with plastic cane 2 mm wide, white half round for canning and 3 mm for edging as approved to be used. The canning shall be as per the Godrej pattern. The frame to be fixed with the steel tubular frame with suitable machine screws complete. |
| 29 | (b) All as specified in item No (a) above but seat frame for Chair CB steel without arm of size as per drg. |
| 30 | (c) All as specified in item No (a) above but back rest frame for Chair CB steel without arm of size as per drg. |
| 31 | (d) All as specified in item No (a) above but back rest frame for Chair CB steel with arm of size as per drg. |
| 32 | (e) Replacement of unserviceable rubber shoes of chair CB steel as per existing one. |
| 33 | (f) Replacement of unserviceable arms rest of 1st class hard wood (Shisham/teak) as per drawing, well finished and shall be polished in a glossy black finished shade as directed. |
| 34 | (e) Removing unserviceable cane plastic from the seat frame/back frame of Chair CB steel with arms. Recanning the all types of wooden frame with plastic cane 2 mm wide half round for canning and 3 mm for edging. The canning shall be done as per Godrej pattern. All seat and back rest frame shall be painted with dual coat of black colour. After canning the frame to be fixed with the steel tubular frame with suitable machine screws complete as per drawing. |
| 35 | (h) Replacement of unserviceable arms rest of 1st class hard wood (Shisham/teak) as per drawing, well finished and shall be polished in a glossy black finished shade as directed. |
| 36 | (f) Cleaning all steel surfaces of various steel Chairs arm thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer by means brush to a glossy finished shade all as specified and directed. |
| 37 | (g) Removing the dents , bends and welding wherever required , complete all as specified and directed by Engr-in-charge. |
| 38 | CHAIR CBA SPL WITH HAND BOARDFD-120(M) |
| 39 | (a) Replacement of unserviceable MS flat iron 20 x 4 mm of 600 mm long painted with olive green/black duly drilled holes of 3 mm for screwing purpose and fixing through continuous welding to under side of seat frame for fixing of seat complete. |
| 40 | (b) Replacement of unserviceable hard wood seat frame of S&F new seat frame Chair CBA spl with hand board with 1st class hard wood(sheesam/teak) seat frame of overall size shwon on as per drg containing each arm of size 25mm thick & 50mm wide. , well finished duly polished with black colour. The holes for canning shall be @ 12.5mm c/c and canning with plastic cane 2 mm wide, white half round for canning and 3 mm for edging as approved to be used. The canning shall be as per the Godrej pattern. The frame to be fixed with the steel tubular frame with suitable machine screws complete. |
| 41 | (c ) All as specified in item No (b) above but back rest frame for Chair CBA spl with hand board of size 455x 380 mm. |
| 42 | (d) Replacement of unserviceable rubber shoes of chair CBA spl hand board as per existing one. |
| 43 | (e) Replacement of unserviceable arms rest of 1st class hard wood (Shisham/teak) as per drawing, well finished and shall be polished in a glossy black finished shade as directed. |
| 44 | (f )Removing unserviceable cane plastic from the seat frame/back frame of Chair CBA spl hand board. Recanning the all types of wooden frame with plastic cane 2 mm wide half round for canning and 3 mm for edging. The canning shall be done as per Godrej pattern. All seat and back rest frame shall be painted with dual coat of black colour. After canning the frame to be fixed with the steel tubular frame with suitable machine screws complete as per drawing. |
| 45 | (g) Replacement of old u/s hand board and S&F new hand board of 18 mm thick both side prelaminated teak faced MDF board of shwon on as per deg with PVC edging all round the top & fixed with suitable screws complete as per drawing. |
| 46 | (j) Cleaning all steel surfaces of various steel Chairs arm thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer by means brush to a glossy finished shade all as specified and directed. |
| 47 | (k) Removing the dents , bends and welding wherever required , complete all as specified and directed by Engr-in-charge. |
| 48 | Chair writing hand board godrejTP |
| 49 | (a) Providing MS flat iron 20 x 4 mm of 600 mm long painted with olive green/black duly drilled holes of 3 mm for screwing purpose and fixing through continuous welding to under side of seat frame for fixing of seat complete. |
| 50 | (b) Replacement of unserviceable hard wood seat frame of S&F new seat frame Chair writing hand board with 1st class hard wood(sheesam/teak) seat frame of overall size 455x410mm containing each arm of size 25mm thick & 50mm wide. , well finished duly polished with black colour. The holes for canning shall be @ 12.5mm c/c and canning with plastic cane 2 mm wide, white half round for canning and 3 mm for edging as approved to be used. The canning shall be as per the Godrej pattern. The frame to be fixed with the steel tubular frame with suitable machine screws complete. |
| 51 | (c) All as specified in item no (b) above but back frame of Chair writing hand board as per existing shape and size. |
| 52 | (l) Replacement of old u/s hand board and S&F new hand board of 18 mm thick both side prelaminated teak faced MDF board of size 300x585mm with PVC edging all round the top & fixed with suitable screws complete as per drawing. |
| 53 | (m) Replacement of unserviceable rubber caps for top end side of MS pipe 25 mm dia of chair CB steel as required and as directed. |
| 54 | (n) Replacement of unserviceable rubber shoes of chair writing godrej as per existing one. |
| 55 | (o) Replacement of unserviceable arms rest of 1st class hard wood (Shisham/teak) as per drawing, well finished and shall be polished in a glossy black finished shade as directed. |
| 56 | (p) Removing unserviceable cane plastic from the seat frame/back frame of Chair writing hand board. Recanning the all types of wooden frame with plastic cane 2 mm wide half round for canning and 3 mm for edging. The canning shall be done as per Godrej pattern. All seat and back rest frame shall be painted with dual coat of black colour. After canning the frame to be fixed with the steel tubular frame with suitable machine screws complete as per drawing. |
| 57 | (b) Replacement of unserviceable 20mm dia MS rod welded to 25mm dia MS rod long 300mm duly two coats of synthetic enamel paint 1st grade over a coat of red oxide primer to fix the hand board complete. |
| 58 | (q) Cleaning all steel surfaces of various steel Chairs arm thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of synthetic enamel paint colour as per approved by GE/EIC 1st grade over a coat of red oxide primer by means brush to a glossy finished shade all as specified and directed. |
| 59 | (r) Removing the dents , bends and welding wherever required , complete all as specified and directed by Engr-in-charge. |
| 60 | Chair writing hand board godrejTP |
| 61 | (a) Providing MS flat iron 20 x 4 mm of 600 mm long painted with olive green/black duly drilled holes of 3 mm for screwing purpose and fixing through continuous welding to under side of seat frame for fixing of seat complete. |
| 62 | (b) Replacement of unserviceable hard wood seat frame of S&F new seat frame Chair writing steel godrej with 1st class hard wood(sheesam/teak) seat frame of overall size 455x410mm containing each arm of size 25mm thick & 50mm wide. , well finished duly polished with black colour. The holes for canning shall be @ 12.5mm c/c and canning with plastic cane 2 mm wide, white half round for canning and 3 mm for edging as approved to be used. The canning shall be as per the Godrej pattern. The frame to be fixed with the steel tubular frame with suitable machine screws complete. |
| 63 | (c) All as specified in item No 8.02 above but back frame of Chair writing steel godrej as per existing shape and size. |
| 64 | (m) Replacement of unserviceable rubber caps for top end side of MS pipe 25 mm dia of chair CB steel as required and as directed. |
| 65 | (n) Replacement of unserviceable rubber shoes of chair writing godrej as per existing one. |
| 66 | (o) Replacement of unserviceable arms rest of 1st class hard wood (Shisham/teak) as per drawing, well finished and shall be polished in a glossy black finished shade as directed. |
| 67 | (p )Removing unserviceable cane plastic from the seat frame/back frame of Chair writing steel godrej. Recanning the all types of wooden frame with plastic cane 2 mm wide half round for canning and 3 mm for edging. The canning shall be done as per Godrej pattern. All seat and back rest frame shall be painted with dual coat of black colour. After canning the frame to be fixed with the steel tubular frame with suitable machine screws complete as per drawing. |
| 68 | (q) Cleaning all steel surfaces of various steel Chairs arm thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of synthetic enamel paint colour as per approved by GE/EIC 1st grade over a coat of red oxide primer by means brush to a glossy finished shade all as specified and directed. |
| 69 | (r) Removing the dents , bends and welding wherever required , complete all as specified and directed by Engr-in-charge. |
| 70 | SOFA SET 5 SEATERFD-281 |
| 71 | Removing old broken/unserviceable legs and S&F new legs made of Ist class hard wood Shisham/Teak wood as required. |
| 72 | Removing old broken/unserviceable arm and S&F new Arms made of Ist class hard wood Shisham/Teak wood as required. |
| 73 | Removing old broken/unserviceable short rails of seat & back and S&F new rails made of Ist class hard wood (shisham/Teak) wood as reqd. |
| 74 | Removing old broken/unserviceable long rails and S&F new rails made of Ist class hard wood Shisham/Teak wood as reqd. |
| 75 | Removing old broken/unserviceable wooden bearer from sofa set and S&F new Bearer made of Ist class hard wood shisham/teak wood as reqd. |
| 76 | Removing old broken/unserviceable Batten from sofa sets and S&F new Batten made of Ist class hard wood (shisham) as per shape and size shown in drawing complete all as specified and directed. |
| 77 | Supply of new Cushion complete as per shape and size ref in drg with 40 density PU foam if size 22\\"x21\\"X 100/95mm Make: sleepwell, Product- Primo Cool/ Kurl-on, Product Gold line plus/ Godrej) with upholstery of tapestry cloth of range not less than Rs 450/RM (make-as per sample) colour / shade & quality and providing a chain of best quality (at either of 21\\" side) with two runners at both ends as approved by Engr-in-Charge/ GE. |
| 78 | Preparation of surfaces by coarse sand paper/grinder of sofa set 3 seater and applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of melamine (jet) polish on exposed surface to achieve high glossy finish, complete all as directed. |
| 79 | All as per itme no 8.07 above but sofa single seater. . |
| 80 | All as per itme no 8.07 above but sofa 4 seater. |
| 81 | All as per item sl no 8.06 but only cushion cover as specified above. |
| 82 | Tightening of complete single seater with the support of bamboo pins and fevicol as per trade practice. Rest all as specified and directed by Engr-in-charge. |
| 83 | All as per item sr no 10.01 but 3 seater. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender