Housing Urban and Rular Development Government Departments Closing in 12 days TDR #58162402

Tender For Storm Water Covered Drains Work In Different Wards Of Mc Rajouri (Part-A)

Issued by Government Departments · Rajouri, Jammu and Kashmir
Tender Value
3.99 Crore
Estimated cost
Bid Submission
12 Nov 2026
12 days left
EMD
7.99 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Storm Water Covered Drains Work In Different Wards Of Mc Rajouri (Part-A)

BOQ

Name of Work:- Storm water covered drains work in different wards of MC Rajouri (Part-A)
Sl. No. Item Description
1Repairing work of drain from the house of Firdous Ahmed Shawl to house of Javed Shawl Ward no. 01 Danishabad colony.
2Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
3Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
4Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
6Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
7Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
8Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
9Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
10Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
11Foundations, footings, bases of columns
12Suspended floors, roofs, landings, balconies and access platforms.
13Edges of slabs and breaks in floors and walls Under 20 cm wide
14Providing and Laying cement concrete Paver Blocks M 30 grade
15Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
16Sand for an average distance of 120 kms by M.T
17Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
18Construction of Drain Channel from the House of master Haji Abdul Qayoom Bhat (Rtd) to House of Tazeem Dar and others ward no. 1 Danishabad colony.
19Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
20Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
21Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
22Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
23Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
24Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 1 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
25Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
26Foundations, footings, bases of columns
27Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
28Sand for an average distance of 120 kms by M.T
29Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
30Stone for an average distance 10 kms by M.T
31Disposal of earth from an average distance of 1 km by MT
32Construction of Drain Channel from NHO Ashfaq Ahmed JE onwards, ward no. 1 near Zari Mart.
33Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
34Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
35Hand packed stone filling behind R/Wall
36Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
37Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
38Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
39Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
40Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
41Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
42Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
43New work
44Available
45Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
46Foundations, footings, bases of columns
47Suspended floors, roofs, landings, balconies and access platforms.
48Edges of slabs and breaks in floors and walls Under 20 cm wide
49Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
50Sand for an average distance of 120 kms by M.T
51Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
52Stone for an average distance 10 kms by M.T
53Construction of Drain Channel from backside house of Qayoom Bhat and shafiq Ahmed Ward no 01.
54Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
55Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
56Hand packed stone filling behind R/Wall
57Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
58Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
59Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
60Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
61Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
62Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
63Providing and fixing 80mm thick Cement concrete interlocking tiles
64Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
65Foundations, footings, bases of columns
66Suspended floors, roofs, landings, balconies and access platforms.
67Edges of slabs and breaks in floors and walls Under 20 cm wide
68Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
69Sand for an average distance of 120 kms by M.T
70Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
71Stone for an average distance 10 kms by M.T
72Construction of Drain Channel and tile work at ward no. 14 NHO Ghulam Hussain S/o Mir Wali Dassal Serian.
73Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
74Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
75Hand packed stone filling behind R/Wall
76Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
77Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
78Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
79Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
80Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
81Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
82Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 1 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
83Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
84Foundations, footings, bases of columns
85Suspended floors, roofs, landings, balconies and access platforms.
86Edges of slabs and breaks in floors and walls Under 20 cm wide
87Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
88Sand for an average distance of 120 kms by M.T
89Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
90Stone for an average distance 10 kms by M.T
91Repair of the Drain Channel/Nallah from Vijay Guru's house to Mata Anand Bharti Ashram till the River (Ward no. 12 MC Rajouri)
92Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
93Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
94Hand packed stone filling behind R/Wall
95Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
96Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
97Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
98Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
99Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
100Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
101Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
102Foundations, footings, bases of columns
103Suspended floors, roofs, landings, balconies and access platforms.
104Edges of slabs and breaks in floors and walls Under 20 cm wide
105Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
106Sand for an average distance of 120 kms by M.T
107Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
108Stone for an average distance 10 kms by M.T
109Tile work work and Drianage construction from Nirankari Bhawan to Anand Karyana Store(Ward no 12 MC Rajouri).
110Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
111Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
112Hand packed stone filling behind R/Wall
113Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
114Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
115Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
116Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
117Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
118Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
119Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
120Foundations, footings, bases of columns
121Suspended floors, roofs, landings, balconies and access platforms.
122Edges of slabs and breaks in floors and walls Under 20 cm wide
123Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
124New work
125Available
126Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
127Sand for an average distance of 120 kms by M.T
128Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
129Stone for an average distance 10 kms by M.T
130Repair of the Nallah from Puneet Mathur's house towards Shushil Sharma's house till the River (Ward No. 12 MC, Rajouri) .
131Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
132Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
133Hand packed stone filling behind R/Wall
134Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
135Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
136Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
137Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
138Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
139Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
140Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 16.93.1 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
141New work
142Available
143Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
144Foundations, footings, bases of columns
145Suspended floors, roofs, landings, balconies and access platforms.
146Edges of slabs and breaks in floors and walls Under 20 cm wide
147Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
148Sand for an average distance of 120 kms by M.T
149Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
150Stone for an average distance 10 kms by M.T
151Construction of Drain Channel from Agriculture Department to Tandwal Link road,Ward no. 13, MC Rajouri.
152Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
153Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
154Hand packed stone filling behind R/Wall
155Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
156Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
157Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
158Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
159Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
160Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
161Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
162Foundations, footings, bases of columns
163Suspended floors, roofs, landings, balconies and access platforms.
164Edges of slabs and breaks in floors and walls Under 20 cm wide
165Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
166Sand for an average distance of 120 kms by M.T
167Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
168Stone for an average distance 10 kms by M.T
169Construction of Lane Drain from Narinder Home to Vicky Home, Ward no. 13.
170Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
171Hand packed stone filling behind R/Wall
172Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
173Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
174Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
175Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
176Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
177Foundations, footings, bases of columns
178Suspended floors, roofs, landings, balconies and access platforms.
179Edges of slabs and breaks in floors and walls Under 20 cm wide
180Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
181Sand for an average distance of 120 kms by M.T
182Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
183Stone for an average distance 10 kms by M.T
184Construction of Lane Drain with slab from Nallah, Ward no. 14 Harijan Colony, MC Rajouri.
185Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
186Hand packed stone filling behind R/Wall
187Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
188Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
189Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
190Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
191Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
192Foundations, footings, bases of columns
193Suspended floors, roofs, landings, balconies and access platforms.
194Edges of slabs and breaks in floors and walls Above 20 cm wide
195Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
196Sand for an average distance of 120 kms by M.T
197Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
198Stone for an average distance 10 kms by M.T
199Construction of PCC Drain Path from Main Road to Chammari Ground, Ward no. 15 Rajouri.
200Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
201Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
202Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
203Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
204Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
205Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
206Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size
207Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
208Foundations, footings, bases of columns
209Suspended floors, roofs, landings, balconies and access platforms.
210Edges of slabs and breaks in floors and walls Under 20 cm wide
211Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
212Sand for an average distance of 120 kms by M.T
213Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
214Stone for an average distance 10 kms by M.T
215Disposal of earth from an average distance of 1 km by MT
216Construction of Drain Channel from NHO Mohd Arshid, Ward no 15,MC Rajouri
217Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.
218Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge
219Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
220Providing and fixing 80mm thick Cement concrete interlocking tiles
221Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
222Foundations, footings, bases of columns
223Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
224Sand for an average distance of 120 kms by M.T
225Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
226Construction of Drain Channel/steps from near H/O Nizam Din to Forest Gate Range Officer, Rajouri.
227Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
228Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
229Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
230Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. 40mm thick with 20 mm nominal size stone aggregate.
231Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern
232Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
233Foundations, footings, bases of columns
234Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
235Sand for an average distance of 120 kms by M.T
236Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
237Stone for an average distance 05 kms by M.T
238Construction of Drain Channel near NHO Sabar Chowdhary and others, Ward no. 02.
239Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
240Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
241Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
242Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. 40mm thick with 20 mm nominal size stone aggregate.
243Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
244Foundations, footings, bases of columns
245Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
246Sand for an average distance of 120 kms by M.T
247Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
248Stone for an average distance 05 kms by M.T
249Drain Channel with Tile Work from BN Library to Alternate road Abdullah Bridge via house of Shafiq Ahmed, Massi Kali, Shakoor Ahmed Peer Sab, ward no. 3.
250Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
251Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
252Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
253Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
254Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
255Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
256Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
257Foundations, footings, bases of columns
258Suspended floors, roofs, landings, balconies and access platforms.
259Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
260Sand for an average distance of 120 kms by M.T
261Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
262Stone for an average distance 05 kms by M.T
263Construction of Drain Channel with iron jungles near H/O Tailor Mohd Iqbal Malik and others, Bela, Colony, ward no. 3.
264Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
265Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
266Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
267Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
268Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
269Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
270Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade withapproved colour, design & pattern.
271Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
272Foundations, footings, bases of columns
273Suspended floors, roofs, landings, balconies and access platforms.
274Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
275Sand for an average distance of 120 kms by M.T
276Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
277Stone for an average distance 05 kms by M.T
278Construction of Drain Channel and protection wall opposite H/O Driver Mohd Hussain DIC office, H/O Ch Noor Hussain, Ab Rasheed Nai and others and construction of Culvert on Nallah Located in Ward No. 3 near Al Faiz Clinic and Zara Gastro Care, Kheora Rajouri.
279Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
280Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
281Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
282Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
283Foundations, footings, bases of columns
284Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
285Sand for an average distance of 120 kms by M.T
286Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
287Stone for an average distance 05 kms by M.T
288Construction of Drain Channel backside of industry Main road to Masjid Cafe Nisar, Ward No. 3 .
289Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
290Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
291Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
292Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
293Foundations, footings, bases of columns
294Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
295Sand for an average distance of 120 kms by M.T
296Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
297Stone for an average distance 05 kms by M.T
298Construction of Drain Channel with iron jungles from H/O Ch Noor Hussain, Ab Rasheed to H/O Dr. Mohd Sharief, via H/O Mohd Razale and others, backside Dr. Absalam Clinic, ward no. 3.
299Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
300Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
301Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
302Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
303Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
304Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
305Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
306Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
307Foundations, footings, bases of columns
308Suspended floors, roofs, landings, balconies and access platforms.
309Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
310Sand for an average distance of 120 kms by M.T
311Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
312Stone for an average distance 05 kms by M.T
313Construction of deep Drain Channel with iron jangles from H/0 Late Molana Dil Mohd to H/O Shabaz Ch via H/O Dr. Arshid and others, Ward No. 3, D.C. Colony.
314Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
315Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
316Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
317Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
318Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
319Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
320Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern
321Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
322Foundations, footings, bases of columns
323Suspended floors, roofs, landings, balconies and access platforms.
324Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
325Sand for an average distance of 120 kms by M.T
326Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
327Stone for an average distance 05 kms by M.T
328Construction of Culvert on Nallah located in Ward No. 3 near Al Faiz Clinic and Zara Gastro Care, Kheora Rajouri.
329Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
330Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
331Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge. Made of G.I. wire of dia 4 mm
332Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
333Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 16.93.1 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
334Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
335Foundations, footings, bases of columns
336Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
337Sand for an average distance of 120 kms by M.T
338Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
339Stone for an average distance 05 kms by M.T
340Construction of Drain Channel from the house of Master Munir to others, Ward No. 3, Kheora near Mastabad Masjid.
341Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
342Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
343Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
344Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
345Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
346Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
347Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
348Chequerred terrazzo tiles 22mm thick with graded marble chips of size upto 6mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, polishing andcuring complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4coarse sand) . Ordinary cement without any pigment.
349Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
350Foundations, footings, bases of columns
351Suspended floors, roofs, landings, balconies and access platforms.
352Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
353Sand for an average distance of 120 kms by M.T
354Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
355Stone for an average distance 05 kms by M.T
356Construction of Drain Channel in centre from H/0 Patwari Abid Mughal Mohalla to H/O Master Misar Malik and others, Ward No. 3, M.C. Rajouri.
357Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
358Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
359Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
360Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
361Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
362Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
363Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
364Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
365Foundations, footings, bases of columns
366Suspended floors, roofs, landings, balconies and access platforms.
367Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
368Sand for an average distance of 120 kms by M.T
369Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
370Stone for an average distance 05 kms by M.T
371Reconstructed Drain Channel from NHO Mohd Shafi and others from old PMGSY Budhal Office up to main lane of Society, Ward No. 3, Rajouri.
372Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
373Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
374Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
375Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
376Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
377Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
378Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
379Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
380Foundations, footings, bases of columns
381Suspended floors, roofs, landings, balconies and access platforms.
382Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
383Sand for an average distance of 120 kms by M.T
384Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
385Stone for an average distance 05 kms by M.T
386Drain Channel near backside Senegalia Mart, Ward No. 3, Bela Colony.
387Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
388Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
389Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
390Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
391Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
392Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
393Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
394Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
395Foundations, footings, bases of columns
396Suspended floors, roofs, landings, balconies and access platforms.
397Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
398Sand for an average distance of 120 kms by M.T
399Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
400Stone for an average distance 05 kms by M.T
401Drain Channel from Main Road to H/O Late Shafeeq Ahmed Dar and others, Bela Colony, Ward No. 3.
402Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
403Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
404Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
405Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
406Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
407Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
408Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
409Foundations, footings, bases of columns
410Suspended floors, roofs, landings, balconies and access platforms.
411Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
412Sand for an average distance of 120 kms by M.T
413Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
414Stone for an average distance 05 kms by M.T
415Drain Channel with tile work of gully NHO Khadam Shah Sahab (130 x 5) ft.
416Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
417Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
418Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
419Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
420Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
421Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
422Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
423Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
424Foundations, footings, bases of columns
425Suspended floors, roofs, landings, balconies and access platforms.
426Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
427Sand for an average distance of 120 kms by M.T
428Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
429Stone for an average distance 05 kms by M.T
430Repair of Drain Channel and road near the NHO of Mohd Ishaq and Yasir Workshop, Ward No. 4.
431Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
432Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
433Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
434Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
435Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 16.94.1 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern
436Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
437Foundations, footings, bases of columns
438Suspended floors, roofs, landings, balconies and access platforms.
439Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
440Sand for an average distance of 120 kms by M.T
441Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
442Stone for an average distance 05 kms by M.T
443Drain Channel from near Shop of Tahir Lone to Main Nalla, Ward No. 4.
444Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
445Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge
446Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
447Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
448Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
449Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
450Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
451Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
452Foundations, footings, bases of columns
453Suspended floors, roofs, landings, balconies and access platforms.
454Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
455Sand for an average distance of 120 kms by M.T
456Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
457Drain Channel from Dutta Complex to New Bus Stand Nalla, Ward No. 4.
458Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
459Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
460Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
461Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
462Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
463Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
464Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
465Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
466Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
467Foundations, footings, bases of columns
468Suspended floors, roofs, landings, balconies and access platforms.
469Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
470Sand for an average distance of 120 kms by M.T
471Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
472Stone for an average distance 05 kms by M.T
473Centre Nalla with tile work at Ward No. 4 from Index Complex to Bus Stand Nalla via Rakesh Tara.
474Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
475Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
476Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
477Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
478Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
479Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
480Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
481Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
482Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
483Foundations, footings, bases of columns
484Suspended floors, roofs, landings, balconies and access platforms.
485Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
486Sand for an average distance of 120 kms by M.T
487Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
488Stone for an average distance 05 kms by M.T
489Drain Channel along with slab tile work from near Shop Imtaz Ahmed to near Shop of Gulshan along with slab, Ward No. 4, New Bus Stand.
490Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
491Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
492Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
493Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
494Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
495Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
496Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
497Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
498Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
499Foundations, footings, bases of columns
500Suspended floors, roofs, landings, balconies and access platforms.
501Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
502Sand for an average distance of 120 kms by M.T
503Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
504Stone for an average distance 05 kms by M.T
505Construction of Drain Channel along with slab tile work & D/Channel from Bus Stand to NHO Zaheer, Ward No. 4.
506Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
507Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
508Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
509Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
510Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
511Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
512Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
513Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
514Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
515Foundations, footings, bases of columns
516Suspended floors, roofs, landings, balconies and access platforms.
517Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
518Sand for an average distance of 120 kms by M.T
519Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
520Stone for an average distance 05 kms by M.T
521Drain Channel along with tile work from NHO Khalil Bhat to Bus Stand via Afsar Shop, W.No. 4
522Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
523Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
524Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
525Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
526Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
527Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
528Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
529Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
530Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
531Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
532Foundations, footings, bases of columns
533Suspended floors, roofs, landings, balconies and access platforms.
534Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
535Sand for an average distance of 120 kms by M.T
536Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
537Stone for an average distance 05 kms by M.T
538Construction of Lane and Drain (Nalla) from PHE Office to Main River, Ward No. 4, Salani, Rajouri,
539Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
540Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
541Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
542Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
543Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
544Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
545Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
546Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
547Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
548Foundations, footings, bases of columns
549Suspended floors, roofs, landings, balconies and access platforms.
550Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
551Sand for an average distance of 120 kms by M.T
552Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
553Stone for an average distance 05 kms by M.T
554Tile work with D/Channel from NHO Krishan Lal to NHO Vicky Kumar, Ward No. 4.
555Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
556Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
557Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
558Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
559Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
560Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
561Foundations, footings, bases of columns
562Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
563Sand for an average distance of 120 kms by M.T
564Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
565Stone for an average distance 05 kms by M.T
566Main Centre Nalla with tile work from NHO Bagh Hussain to Imran Ch Shop vía Madarsa Faizan Baba Glulam Shah Badsha, Ward No, 4.
567Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
568Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
569Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
570Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
571Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
572Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
573Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
574Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
575Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
576Foundations, footings, bases of columns
577Suspended floors, roofs, landings, balconies and access platforms.
578Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
579Sand for an average distance of 120 kms by M.T
580Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
581Stone for an average distance 05 kms by M.T
582Repalr of tile work with Drain Channel from Mallik Market to Jaral Printer, ward no 04.
583Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
584Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
585Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
586Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
587Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
588Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
589Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
590Foundations, footings, bases of columns
591Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
592Sand for an average distance of 120 kms by M.T
593Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
594Stone for an average distance 05 kms by M.T
595Construction of Lane and Drain with tile work from NHO Rayasat Khan and Master Nisar, Ward No. 4, Rajouri.
596Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
597Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
598Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
599Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
600Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
601Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
602Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
603Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
604Foundations, footings, bases of columns
605Suspended floors, roofs, landings, balconies and access platforms.
606Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
607Sand for an average distance of 120 kms by M.T
608Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
609Stone for an average distance 05 kms by M.T
610Construction of Lane and Drain from NHO Qayoom Mistri to Main Nalla, Ward No. 4.
611Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
612Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
613Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
614Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
615Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
616Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
617Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
618Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
619Foundations, footings, bases of columns
620Suspended floors, roofs, landings, balconies and access platforms.
621Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
622Sand for an average distance of 120 kms by M.T
623Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
624Construction of Drain from Alishan (barber shop) upto the chamber of adv.Ahsan mirza s/o Abdul Qayoom Mirza w.no 04.
625Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
626Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
627Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
628Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
629Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
630Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
631Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
632Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
633Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
634Foundations, footings, bases of columns
635Suspended floors, roofs, landings, balconies and access platforms.
636Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
637Sand for an average distance of 120 kms by M.T
638Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
639Stone for an average distance 05 kms by M.T
640Reconstruction of the damaged path including drain and allied works from kheora Main road towards Mohallah Nizmia upto the house of Mohd Sadiq, Mian Junaid Hussaln and others including protection work to the Nallah.
641Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
642Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
643Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
644Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
645Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
646Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
647Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
648Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
649Foundations, footings, bases of columns
650Suspended floors, roofs, landings, balconies and access platforms.
651Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
652Sand for an average distance of 120 kms by M.T
653Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
654Stone for an average distance 05 kms by M.T
655Detailed Estimate for construction of lane, drain and other allied w,no 01 to w.no 17 of Rajouri town.
656Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
657Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
658Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
659In soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m.
660Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.
661Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
662Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
663Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
664Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
665Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
666Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
667Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
668Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
669Foundations, footings, bases of columns
670Suspended floors, roofs, landings, balconies and access platforms.
671Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
672Sand for an average distance of 120 kms by M.T
673Stone aggregate below 40 mm nominal size for an average distance 25 kms by M.T
674Stone for an average distance 05 kms by M.T
675Fixing of Grating in various wards from w.no 01 to 17.
676Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
677Construction of Lane and Drain/Nalla from Main Bazaar to River Ashram, Ward No. 7
678Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
679Hand packed stone filling behind R/Wall
680Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
681Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
682Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
683Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
684Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
685Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
686Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
687Foundations, footings, bases of columns
688Suspended floors, roofs, landings, balconies and access platforms.
689Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
690Sand for an average distance of 120 kms by M.T
691Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
692Stone for an average distance 10 kms by M.T
693Disposal of earth from an average distance of 1 km by MT
694Construction of Drain Channel with tle work, Ward No. 7, NHO Manzoor to Sanjay, Rajouri.
695Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
696Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
697Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
698Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
699Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
700Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
701Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
702Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
703Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
704Foundations, footings, bases of columns
705Suspended floors, roofs, landings, balconies and access platforms.
706Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
707Sand for an average distance of 120 kms by M.T
708Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
709Stone for an average distance 10 kms by M.T
710Disposal of earth from an average distance of 1 km by MT
711Drain Channel/Slab from City Road to Anandpur Ashram, Ward No. 7.
712Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
713Hand packed stone filling behind R/Wall
714Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
715Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
716Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
717Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
718Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
719Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
720Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
721Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
722Foundations, footings, bases of columns
723Suspended floors, roofs, landings, balconies and access platforms.
724Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
725Sand for an average distance of 120 kms by M.T
726Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
727Stone for an average distance 10 kms by M.T
728Disposal of earth from an average distance of 1 km by MT
729Repair of Drain Channel/Nalla opposite Kuldeep Raj Gupta to Main Road, Ward No. 07.
730Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
731Hand packed stone filling behind R/Wall
732Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
733Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
734Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
735Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
736Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
737Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
738Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
739Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
740Foundations, footings, bases of columns
741Suspended floors, roofs, landings, balconies and access platforms.
742Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
743Sand for an average distance of 120 kms by M.T
744Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
745Stone for an average distance 10 kms by M.T
746Disposal of earth from an average distance of 1 km by MT
747Drain Channel, Dhakki Bazar backside to Mandir, Ward No. 07.
748Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
749Hand packed stone filling behind R/Wall
750Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
751Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
752Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
753Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
754Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
755Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
756Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
757Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
758Foundations, footings, bases of columns
759Suspended floors, roofs, landings, balconies and access platforms.
760Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
761Sand for an average distance of 120 kms by M.T
762Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
763Stone for an average distance 10 kms by M.T
764Disposal of earth from an average distance of 1 km by MT
765Construction of Lane and Drain from Court Complex to Main Road River, Ward No. 7, MC Rajouri.
766Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
767Hand packed stone filling behind R/Wall
768Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
769Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
770Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
771Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
772Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
773Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
774parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
775Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
776Foundations, footings, bases of columns
777Suspended floors, roofs, landings, balconies and access platforms.
778Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
779Sand for an average distance of 120 kms by M.T
780Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
781Stone for an average distance 10 kms by M.T
782Disposal of earth from an average distance of 1 km by MT
783Drain Channel with tile work from Bilal Masjid to Main Road, Ward No. 7.
784Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
785Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
786Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
787Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
788Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
789Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
790Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
791Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
792Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
793Foundations, footings, bases of columns
794Suspended floors, roofs, landings, balconies and access platforms.
795Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
796Sand for an average distance of 120 kms by M.T
797Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
798Stone for an average distance 10 kms by M.T
799Disposal of earth from an average distance of 1 km by MT
800Construction of Deep Drain Centre with P/Wall Concrete from NHO Haji Mohd Yousaf Dar to NHO Tailor Haji Abdul Rashid Mir Tailor, Ward No. 8 via NHO Hajl A.D. Gafor Dar (very Important).
801Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
802Hand packed stone filling behind R/Wall
803Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
804Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
805Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
806Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
807Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
808Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
809Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
810Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
811Foundations, footings, bases of columns
812Suspended floors, roofs, landings, balconies and access platforms.
813Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
814Sand for an average distance of 120 kms by M.T
815Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
816Stone for an average distance 10 kms by M.T
817Disposal of earth from an average distance of 1 km by MT
818Construction of Lane and Drain with Tile Work from NHO Basharat Ahmed to NHO Shakeel Mir, Ward No. 8, MC Rajouri.
819Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
820Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
821Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
822Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
823Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
824Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
825Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
826Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
827Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
828Foundations, footings, bases of columns
829Suspended floors, roofs, landings, balconies and access platforms.
830Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
831Sand for an average distance of 120 kms by M.T
832Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
833Stone for an average distance 10 kms by M.T
834Disposal of earth from an average distance of 1 km by MT
835Construction of Drain Channel (Nallah) from the house of Dr. Dawarka to the house of Late Abdul Majeed Mir. Ward No, 9.
836Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
837Hand packed stone filling behind R/Wall
838Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
839Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
840Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
841Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
842Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
843Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
844Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
845Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
846Foundations, footings, bases of columns
847Suspended floors, roofs, landings, balconies and access platforms.
848Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
849Sand for an average distance of 120 kms by M.T
850Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
851Stone for an average distance 10 kms by M.T
852Disposal of earth from an average distance of 1 km by MT
853Construction of Drain Channel from Shri Guru Ravidas Temple to the house of Raj Kumur Talwar, Ward No. 9.
854Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
855Hand packed stone filling behind R/Wall
856Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
857Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
858Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
859Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
860Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
861Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
862Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
863Foundations, footings, bases of columns
864Suspended floors, roofs, landings, balconies and access platforms.
865Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
866Sand for an average distance of 120 kms by M.T
867Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
868Stone for an average distance 10 kms by M.T
869Disposal of earth from an average distance of 1 km by MT
870Drain Channel (Deep) from Sunny Pogyul to Dr. Dawarka House, Ward No. 9.
871Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
872Hand packed stone filling behind R/Wall
873Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
874Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
875Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
876Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
877Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
878Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
879Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
880Foundations, footings, bases of columns
881Suspended floors, roofs, landings, balconies and access platforms.
882Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
883Sand for an average distance of 120 kms by M.T
884Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
885Stone for an average distance 10 kms by M.T
886Disposal of earth from an average distance of 1 km by MT
887Drain Channel and tile work from Jamia Masjid (Main City) to Masjid Talab (Ward No. 9, MC Rajouri).
888Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:4:8 or leaner mix (i/c equivalent design mix)
889Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
890Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
891Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
892Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
893Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
894Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
895Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-30 grade with approved color design and pattern.
896Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
897Foundations, footings, bases of columns
898Suspended floors, roofs, landings, balconies and access platforms.
899Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
900Sand for an average distance of 120 kms by M.T
901Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
902Stone for an average distance 10 kms by M.T
903Disposal of earth from an average distance of 1 km by MT
904Construction of Main Nalla from the house of Deepak Sayal to Adv. Dell Kumar's House (Ward No. 9, MC Rajouri).
905Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
906Hand packed stone filling behind R/Wall
907Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
908Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
909Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
910Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
911Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
912Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
913Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
914Foundations, footings, bases of columns
915Suspended floors, roofs, landings, balconies and access platforms.
916Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
917Sand for an average distance of 120 kms by M.T
918Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
919Stone for an average distance 10 kms by M.T
920Disposal of earth from an average distance of 1 km by MT
921Construction of Lane and Drain from Ravidas Mandir to NHO Ankit Media, Ward No. 9.
922Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
923Hand packed stone filling behind R/Wall
924Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
925Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
926Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
927Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
928Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
929Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
930Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
931Foundations, footings, bases of columns
932Suspended floors, roofs, landings, balconies and access platforms.
933Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
934Sand for an average distance of 120 kms by M.T
935Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
936Stone for an average distance 10 kms by M.T
937Disposal of earth from an average distance of 1 km by MT
938Construction of Lane and Drain from NHO Bader-ud-din to HEM School, Ward No. 9, MC Rajouri.
939Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
940Hand packed stone filling behind R/Wall
941Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
942Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
943Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
944Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
945Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
946Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
947Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
948Foundations, footings, bases of columns
949Suspended floors, roofs, landings, balconies and access platforms.
950Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
951Sand for an average distance of 120 kms by M.T
952Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
953Stone for an average distance 10 kms by M.T
954Disposal of earth from an average distance of 1 km by MT
955Drain Channel from house of Jia Lal, Lecturer, up to River.
956Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
957Hand packed stone filling behind R/Wall
958Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
959Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
960Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
961Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
962Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
963Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
964Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
965Foundations, footings, bases of columns
966Suspended floors, roofs, landings, balconies and access platforms.
967Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
968Sand for an average distance of 120 kms by M.T
969Stone aggregate below 40 mm nominal size for an average distance 20 kms by M.T
970Stone for an average distance 10 kms by M.T
971Disposal of earth from an average distance of 1 km by MT
972D/Channel with tile work from Bod Raj to NHO Pappi Devi, Ward No. 5.
973Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
974Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
975Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
976Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
977Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
978Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
979Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
980Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
981Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
982Foundations, footings, bases of columns
983Suspended floors, roofs, landings, balconies and access platforms.
984Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
985Sand for an average distance of 120 kms by M.T and 100 mtr HL
986Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T and 100 mtr HL
987Stone for an average distance 05 kms by M.T and 100 mtr HL
988Disposal of earth from an average distance of 5 km by MT
989Drain and protection wall backside Madina Manzil Panja, Ward No. 5.
990Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
991Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
992Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
993Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
994Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
995Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
996Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
997Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
998Sand for an average distance of 120 kms by M.T
999Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1000Stone for an average distance 05 kms by M.T
1001Nalla with steps from NHO Ashok Sharma to Main Road, Ward No. 5.
1002Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1003Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1004Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1005Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1006Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1007Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1008Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
1009Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1010Foundations, footings, bases of columns
1011Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1012Sand for an average distance of 120 kms by M.T
1013Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1014Stone for an average distance 05 kms by M.T
1015Disposal of earth from an average distance of 5 km by MT
1016Construction of Lane and Drain from Bawali to Saw Mill, Ward No. 5, Rajouri.
1017Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1018Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1019Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1020Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1021Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1022Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1023Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Dark shade using ordinary cement.
1024Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1025Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
1026Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1027Foundations, footings, bases of columns
1028Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1029Sand for an average distance of 120 kms by M.T
1030Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1031Stone for an average distance 05 kms by M.T
1032Disposal of earth from an average distance of 5 km by MT
1033Construction of Lane and Drain from Main Road to Ashok Sharma House, old Gali reparing, Ward No. 5.
1034Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm.
1035Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1036Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1037Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1038Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1039Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1040Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
1041Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1042Foundations, footings, bases of columns
1043Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1044Sand for an average distance of 120 kms by M.T
1045Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1046Stone for an average distance 05 kms by M.T
1047Disposal of earth from an average distance of 5 km by MT
1048Construction of Lane and Drain from Iftar Hussain to Subedar lqbal Hussain, Ward No. 5, Rajouri.
1049Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1050Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1051Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1052Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1053Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
1054Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1055Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1056Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1057Sand for an average distance of 120 kms by M.T
1058Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1059Stone for an average distance 05 kms by M.T
1060Construction of Drain Channel with tile work from NHO Vishav Deep Chandan to Lakh Raj Rajouri Sharma, Ward No. 5, MC Rajouri.
1061Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1062Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1063Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1064Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1065Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1066Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1067Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1068Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1069Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
1070Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1071Foundations, footings, bases of columns
1072Suspended floors, roofs, landings, balconies and access platforms.
1073Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1074Sand for an average distance of 120 kms by M.T
1075Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1076Stone for an average distance 05 kms by M.T
1077Disposal of earth from an average distance of 5 km by MT
1078D/Channel from NHO Parvaiz to Masjid.
1079Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1080Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1081Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1082Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1083Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1084Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1085Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1086Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1087Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1088Suspended floors, roofs, landings, balconies and access platforms.
1089Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1090Sand for an average distance of 120 kms by M.T
1091Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1092Stone for an average distance 05 kms by M.T
1093Tile work along with Drain Channel from NHO Taju Loan to NHO Sayed Ashfaq Shah, Ward No. 6.
1094Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1095Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1096Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1097Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1098Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
1099Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1100Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1101Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1102Sand for an average distance of 120 kms by M.T
1103Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1104Stone for an average distance 05 kms by M.T
1105Drain Channel with tile work from Ziarat Morh to Sericulture.
1106Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1107Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1108Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1109Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1110Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1111Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1112Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1113Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1114Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1115Foundations, footings, bases of columns
1116Suspended floors, roofs, landings, balconies and access platforms.
1117Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1118Sand for an average distance of 120 kms by M.T
1119Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1120Stone for an average distance 05 kms by M.T
1121Disposal of earth from an average distance of 5 km by MT
1122D/Channel & tile work slab from NHO Dillar Ahmed to NHO Ashok Kumar, Falal Singh via NHO Mohd. Rashid & Darshan Lal, Ward No. 6.
1123Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1124Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1125Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1126Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1127Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1128Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1129Suspended floors, roofs, landings, balconies and access platforms.
1130Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1131Sand for an average distance of 120 kms by M.T
1132Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1133Construction of Lane and Drain near Shamshan Ghat, Ward No. 6, Rajouri.
1134Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1135Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1136Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1137Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1138Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1139Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1140Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1141Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1142Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1143Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1144Sand for an average distance of 120 kms by M.T and 100 mtr HL
1145Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T and 100 mtr HL
1146Stone for an average distance 05 kms by M.T and 100 mtr HL
1147Disposal of earth from an average distance of 5 km by MT
1148Construction of Lane and Drain from People Morh, Jawahar Nagar to Cheeku House, Ward No. 6, Rajouri.
1149Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm.
1150Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1151Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1152Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
1153Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1154Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1155Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1156Sand for an average distance of 120 kms by M.T
1157Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1158Stone for an average distance 05 kms by M.T
1159Disposal of earth from an average distance of 5 km by MT
1160Construction of Lane and Drain from Ravi Kant House to Kamla Devi W/O Lt. Mumohan Sharma, 30 feet, Ward No. 6, Jawahar Nagar.
1161Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1162Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1163Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1164Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1165Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1166Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1167Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1168Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1169Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1170Foundations, footings, bases of columns
1171Suspended floors, roofs, landings, balconies and access platforms.
1172Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1173Sand for an average distance of 120 kms by M.T and 100mtr by HL
1174Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T and 100mtr by HL
1175Stone for an average distance 05 kms by M.T and 100mtr by HL
1176Disposal of earth from an average distance of 5 km by MT
1177Construction of Drain Channel, Tanch Mohalla, Lower Thudi Thandi, Ward No. 16.
1178Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1179Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1180Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1181Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1182Foundations, footings, bases of columns
1183Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1184Sand for an average distance of 120 kms by M.T
1185Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1186Stone for an average distance 05 kms by M.T
1187Construction of Drain Channel with Deep Drain Centre from NHO Koushal Auto Driver to Main Road via house of Parvaiz Wani, near CTO, Ward No. 16, Dhanidhar.
1188Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1189Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1190Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1191Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1192Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1193Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1194Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1195Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1196Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1197Suspended floors, roofs, landings, balconies and access platforms.
1198Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1199Sand for an average distance of 120 kms by M.T
1200Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1201Stone for an average distance 05 kms by M.T
1202Drain Channel from the house of Mohd. Jameel (Main Road) to the house of Qamar Rubani, Dhanidhar, Ward No. 16, Rajouri.
1203Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1204Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1205Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1206Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1207Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1208Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1209Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1210Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1211Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1212Suspended floors, roofs, landings, balconies and access platforms.
1213Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1214Sand for an average distance of 120 kms by M.T
1215Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1216Stone for an average distance 05 kms by M.T
1217Disposal of earth from an average distance of 5 km by MT
1218Construction of Drain Channel with tile work Chandi Mohalla Thudi Kass.
1219Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1220Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1221Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1222Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
1223Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1224Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1225Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1226Sand for an average distance of 120 kms by M.T and 100mtr by HL
1227Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T and 100mtr by HL
1228Stone for an average distance 05 kms by M.T and 100mtr by HL
1229Disposal of earth from an average distance of 5 km by MT
1230Construction of Boundary Wall, Graveyard near H/O Haji Shah Mohd, Thudi.
1231Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1232Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1233Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1234Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diametre.
1235Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1236Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1237Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1238Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1239Sand for an average distance of 120 kms by M.T
1240Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1241Stone for an average distance 05 kms by M.T
1242Construction of Drain Channel/Tile Work near Wazir Hussain, Tanch Mohalla, Thudi Kass.
1243Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1244Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1245Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1246Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1247Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Dark shade using ordinary cement.
1248Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1249Foundations, footings, bases of columns
1250Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1251Sand for an average distance of 120 kms by M.T and 10 mtr by HL
1252Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T and 10 mtr by HL
1253Stone for an average distance 05 kms by M.T and 10 mtr by HL
1254Disposal of earth from an average distance of 5 km by MT
1255Construction of Drain Channel along with tile work, NO Haji Mohd Saleem Ch, Ward No. 16, MC Rajouri.
1256Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1257Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1258Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1259Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1260Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1261Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1262Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1263Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
1264Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1265Foundations, footings, bases of columns
1266Suspended floors, roofs, landings, balconies and access platforms.
1267Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1268Sand for an average distance of 120 kms by M.T
1269Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1270Stone for an average distance 05 kms by M.T
1271Construction of Protection wall /Compound wall near Land Graveyard Chandimarh to Dogrian ward No 06 MC Rajouri
1272Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
1273Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size)
1274Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 using 20% plum of nallah split stone ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1275uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe 110 mm dia
1276Hand -packing stones filling behind R/Walls,abutments,wing walls etc,excluding cost of stones
1277Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1278Retaining walls, return walls, walls (any thickness) including attached pilastersbuttresses, plinth and string course fillets, kerbs and steps etc.
1279Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1280Sand for an average distance of 120 kms by M.T
1281Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1282Stone for an average distance of 05 Km by M.T
1283Drain Channel from NHO Madad Hussain to Late Mohd. Ashraf, Ward No.17.
1284Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1285Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1286Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% Boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1287Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1288Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
1289Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.
1290Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1291Foundations, footings, bases of columns
1292Suspended floors, roofs, landings, balconies and access platforms.
1293Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1294Sand for an average distance of 120 kms by M.T
1295Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T
1296Stone for an average distance 05 kms by M.T
1297Construction of lane with drain near of Jameel Ahmed Bhat W.no 17 (Nazimia Colony Rajouri).
1298Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
1299Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
1300Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 with 20% boulders ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
1301Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1302Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve
1303Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
1304Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern
1305Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.
1306Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete
1307Foundations, footings, bases of columns
1308Suspended floors, roofs, landings, balconies and access platforms.
1309Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
1310Sand for an average distance of 120 kms by M.T
1311Stone aggregate below 40 mm nominal size for an average distance 15 kms by M.T
1312Stone for an average distance 05 kms by M.T Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58162402
AUTHORITY Government Departments
TENDER VALUE 3.99 Crore
LAST DATE 12-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Storm Water Covered Drains Work In Different Wards Of Mc Rajouri (Part-A)
Basic Detail
Tender No e-NIT No. 40 of 2026-27 Dated 22.10.2026
Bidding Type Tender
Location
City Rajouri
State Jammu and Kashmir
Key Dates
Publish Date 23 Oct 2026
Submission Date 12 Nov 2026
Open Date 13 Nov 2026
Finance
Tender Value 3.99 Crore
Tender Fee 6000
EMD 7.99 Lakhs
Exemption Not Available
Document List
02d9039f-404c-474f-9b59-7c7605bf3651.html
BOQ_1114829.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 23, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Nov 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

02d9039f-404c-474f-9b59-7c7605bf3651.html

xls

BOQ_1114829.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender