Tender For special Repair To Ybo Line Qtr No. P-05/1 To 06 Of Mh Jaipur Alongwith Minor Work Under Zone-Ii Area At Jaipur Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Nov 2026
0 days left
EMD
83740
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Ybo Line Qtr No. P-05/1 To 06 Of Mh Jaipur Alongwith Minor Work Under Zone-Ii Area At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for as specified and directed by Engg-in-Charge. |
| 2 | M&L for RCC (nominal mix) 1:1.5:3 Type A1 (using 20 mm graded stone aggregate ) as in Chhaja, roof projections, slab supported on wall, beams, and columns, balconies, canopies, deck slab and in shelves and the like etc.complete all as specified & directed.Note :- Reinforcement shall be measured and paid for separately. |
| 3 | Use & waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.and similar items with rough finished surface of concrete complete all as specified and directed. |
| 4 | Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide for rough finished surfaces all as specified and directed. |
| 5 | M&L Mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding, machinery, tools tackels and men materials complete all as specified and as directed by Engr-in-charge. |
| 6 | ,--- ditto--- all as per srl item No. 5 above but TMT bar of 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as directed and specified. |
| 7 | Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 8 | M&L for applying SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment, (consumption Qty as per manufacturer’s instructions but min 0.4 kg/Sqm approx) including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items using nylon brush complete all as specified and as directed by Engineer-in-charge.Make:- Sika- Latex SBR / Fosroc-Nitobond SBR Latex / Asian SmartCare Repair Polymer, JKM or equivalent as approved by GE |
| 9 | M&L for 15 mm thick polymer-modified mortar on load-carrying RCC members applied in two layers, comprising approved polymer, cement and graded quartz sand in the proportion of 1:5:15 by weight, with water as per manufacturer's recommended water-cement ratio for desired consistency. Surface shall be properly cleaned and prepared before application. The mortar shall be uniformly applied, finished by floating/trowelling and properly cured after initial setting complete as per manufacturer's specifications and direction complete all as specified and directed by the Engineer-in-Charge. |
| 10 | M&L for 30 mm thick polymer-modified mortar on load-carrying RCC members applied in two layers, comprising approved polymer, cement and graded quartz sand in the proportion of 1:5:15 by weight, with water as per manufacturer's recommended water-cement ratio for desired consistency. Surface shall be properly cleaned and prepared before application. The mortar shall be uniformly applied, finished by floating/trowelling and properly cured after initial setting complete as per manufacturer's specifications and direction complete all as specified and directed by the Engineer-in-Charge. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed. |
| 12 | M&L for jointfree coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 13 | M&L for glazed ceramic tiles, coloured 450 x 350 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 14 | M&L for light shade full body vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tile n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed |
| 15 | M & L for light shade joint free full body vitrified ceramic tiles 10mm thick (square/rectangular) of approved shade, polished, area of each tiles not exceeding 0.36 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 16 | S&F in repair 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 fixed to walls and ceiling or laid in floor incl taking down complete all as specified and directed. |
| 17 | ,---ditto--- all as per item No. 16 above but 20mm bore tubing complete all as specified and directed. |
| 18 | ,---ditto--- all as per item No. 16 above but 25mm bore tubing complete all as specified and directed. |
| 19 | S&F in repair 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 20 | S&F in repair 25mm bore gun metal gate valve, screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed. |
| 21 | S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks, white, triple layered (cylindrical vertical with closed top) hoisted and fixed in position & including all fittings such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc incl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. Supply and fix in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part including dismantling of old tank |
| 22 | S&F in repairs vitreous china wash hand basin white flat backor angle back, of size 630 x 450 mm excluding taps, chain & plug and porcelene stopper but including brackets /fastners, 32mm dia brass chromium plated waste coupling with long screwed shanks and fly-nuts, 32mm dia PVC waste pipe, flange end bedded in red lead cement and other end fixed, cutting for and pinning in ends of brackets including fixing of pillar taps complete all as specified and directed. |
| 23 | Supply only WHB mixer, 15mm bore, cast copper alloy, fancy type, chromium plated, single lever, swan neck with crutch or butterfly handle, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 24 | S & F in repair 15mm bore wall mixer, brass, chromium plated, fancy type, 3-in-1 for mixing hot & cold water, with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed. |
| 25 | S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 26 | S&F in repair PVC Connections 15mm size, 450mm long with PTMT nuts complete all as specified and as directed. |
| 27 | S&F in repair soap Dispenser with holder with frosted glass bottle in polished chrome, 265 X 118 X 110mm size, 0.8ltr capacity and fixed chromium plated brass screw complete all as specified and directed. |
| 28 | S&F in repair SS Grating doom 125 mm dia with or without waste hole complete all as specified and as directed. |
| 29 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. incl trap set in cement concrete complete all as specified and directed. |
| 30 | S & F in repair vitreous china squatting pan, 'long pan\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S' trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed. |
| 31 | S&F in repair PVC valveless, syphonic action type flushing cistern, low level, 10 ltr capacity, white, with intel, ball valve, float and handle including brakects, 32 mm dia polyethylene of low or high density or PVC flushing pipe and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified & as directed. |
| 32 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 33 | S&F in repair chromium plated tubular towel ring of stainless steel (SS-304) included new chromium plated brass screws & plastic rawl plug complete all as specified and directed by Engr In Charge |
| 34 | S&F in repair Towel Rack with lower hanger, chrome finish stainless steel (SS-304) and fixed with screws complete all as specified and as directed. |
| 35 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 36 | S&F in repair 15mm bore stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed. |
| 37 | S&F in repair 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with cruth or butter fly handle, long body, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 38 | S&F in repair 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 39 | M& L in repair for 75mm bore Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 40 | Taking down eaves gutters, sanitary PVC pipes and rainwater pipes, cast iron pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 41 | S&F 100mm bore Cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears, with lead joints, laid in trenches or in floors complete all as specified and directed.Note: Payment of each lead joint paid seperately under respective item of BOQ |
| 42 | S&F 75mm bore Cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears, with lead joints, laid in trenches or in floors complete all as specified and directed.Note: Payment of each lead joint paid seperately under respective item of BOQ |
| 43 | S&F 75mm bore Cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears, with lead joints fixed to walls complete all as specified and directed.Note: Payment of each lead joint paid seperately under respective item of BOQ |
| 44 | S&F 100mm bore Cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears, with lead joints fixed to walls complete all as specified and directed.Note: Payment of each lead joint paid seperately under respective item of BOQ |
| 45 | Extra over of 100mm bore cast iron pipes and fittings if lead joint is provided in lieu of cement joint complete all as specified and directed. |
| 46 | Extra over of 75mm bore cast iron pipes and fittings if lead joint is provided in lieu of cement joint complete all as specified and directed. |
| 47 | S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 48 | S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 49 | S&F 100mm bore cast iron bends (any radius) with duck's foot or heel rest complete all as specified and as directed. |
| 50 | S&F 75mm bore cast iron bends (any radius) with duck's foot or heel rest complete all as specified and as directed. |
| 51 | S&F 75mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. |
| 52 | S&F 100mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. |
| 53 | S&F 100mm bore cast iron ‘P’ or ‘S’ trap including fixing complete all as specified and as directed. |
| 54 | Taking down existing roof treatment complete including demolition of PCC, Mud phuskas, lime concrete etc any description upto mother slab, and properly cleaning the surface to remove loose particles with wire brushes and removing the debris out side of MoD land complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 55 | Taking down existing roof treatment complete including demolition of PCC, Mud phuskas, lime concrete etc any description upto mother slab, and properly cleaning the surface to remove loose particles with wire brushes and removing the debris out side of MoD land complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender