Tender For Biennial Contract For Carpentry, Plumbing Maintenance Work & Other Miscellaneous Works For Hill Side Buildings And Other Buildings At Gamma Field, Barc, Trombay, Mumbai For Year 2026-2028.
Tender Value
2.17 Crore
Estimated cost
Bid Submission
23 Nov 2026
27 days left
EMD
5.14 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Biennial Contract For Carpentry, Plumbing Maintenance Work & Other Miscellaneous Works For Hill Side Buildings And Other Buildings At Gamma Field, Barc, Trombay, Mumbai For Year 2026-2028.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make or approved equivalent quality or product meeting technical parameters single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make or approved equivalent quality or product meeting technical parametersor approved equivalent quality or product meeting technical parametersfor wash basins / urinal etc all as per specifications and directed by the Engineer in charge |
| 2 | Providing and fixing Brass 15 mm C.P presstomatic series auto shut urinal flush cock of approved make or approved equivalent quality or product meeting technical parameters |
| 3 | Providing and fixing 15 mm C.P brass urinal spreader size with 1/2\\" BSP thread and shapes, weighing not less than 60 gm of approved make or approved equivalent quality or product meeting technical parameters. |
| 4 | Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia |
| 5 | 600mm long |
| 6 | 450mm long |
| 7 | Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make or approved equivalent quality or product meeting technical parameters with wall brackets and type as per specifications and as directed by the Engineer-in-charge. |
| 8 | Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of approved make or approved equivalent quality or product meeting technical parameters of the following capacities with suitable S. M. C cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I Nipples ranging from 15 mm to 50 mm n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge |
| 9 | HDPE CYLINDRICAL vertical storage water tank 1500 lit capacit |
| 10 | Providing and fixing heavy quality C.P .brass waste coupling of following dia for wash basin and sink, of approved make or approved equivalent quality or product meeting technical parameters, size and quality all as directed by the EIC. |
| 11 | C.P Brass Waste coupling 32 mm Dia of approved make or approved equivalent quality or product meeting technical parameters Half threaded or Full threaded as per requirement. |
| 12 | Providing and fixing viterious China wash basin of approved make or approved equivalent quality or product meeting technical parameters and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge |
| 13 | White vitreous China counter top / counter below wash basin size 560 x 410 mm / 560 x 450 mm with single 15 mm C.P. brass pillar tap (OVAL / ROUND Models.note : Table top model will be also paid in this item |
| 14 | Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make or approved equivalent quality or product meeting technical parameters in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 15 | Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved make or approved equivalent quality or product meeting technical parameters with Push cock of approved make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge |
| 16 | Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make or approved equivalent quality or product meeting technical parameters , 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge |
| 17 | E.W.C. pan in White colour with ISI marked white solid plastic seat and lid |
| 18 | Providing and fixing Indian water closet (Orissa pan) of approved make or approved equivalent quality or product meeting technical parameters with 100 mm China ware P or S trap, One Nos. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. |
| 19 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm |
| 20 | Providing and fixing heavy quality stainless steel / C.P brass grating of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge |
| 21 | SS grating 125 mm dia |
| 22 | Providing and fixing PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charg |
| 23 | SWR PIPE 90 mm O/D |
| 24 | SWR PIPE 110 mm O/D |
| 25 | Supplying and fixing CI cover 300 x 300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg |
| 26 | Supplying and fixing Cast Iron Man hole or Cast Iron Steps cover of approved make or approved equivalent quality or product meeting technical parametersand weight as specified in the drawings or as directed by the Engineer in charge. |
| 27 | Providing and constructing Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with cement mortar 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item) |
| 28 | Extra depth over initial depth of 900 mm for chambers of 900 x 600 mm internal size.including fixing cast iron steps (C.I steps shall be paid under relevant item) |
| 29 | Providing and laying Non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete. |
| 30 | 150 mm Dia RCC Hume pipe class Np2 |
| 31 | 250 mm Dia RCC Hume pipe class Np2 |
| 32 | 300 mm Dia RCC Hume pipe class Np2 |
| 33 | Painting G.I pipes with 2 coats of synthetic enamel paint of approved colour over a coat of approved Zinc Chromate Primer all as per specifications and as directed by the Engineer-in-charge. |
| 34 | For 15 mm Dia G.I pipe |
| 35 | For 20 mm Dia G.I pipe |
| 36 | For 25 mm Dia G.I pipe |
| 37 | For 32 mm Dia G.I pipe |
| 38 | For 40 mm Dia G.I pipe |
| 39 | For 50 mm Dia G.I pipe |
| 40 | Providing and fixing Heavy Quality 15 mm C.P brass swan neck pillar cock of approved make or approved equivalent quality or product meeting technical parameters as per specifications and as directed by the Engineer-in-charg |
| 41 | Providing and fixing C.P brass 2 way Angle cock (2 Angle cock combination in single fitting) of heavy quality of approved make or approved equivalent quality or product meeting technical parametersas per specifications and as directed by the Engineer-in-charge. |
| 42 | Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make or approved equivalent quality or product meeting technical parameters as per specifications and as directed by Engineer-in-charge complete. |
| 43 | Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make or approved equivalent quality or product meeting technical parameters , for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge |
| 44 | 15 mm n.b CP brass Angle cock |
| 45 | Providing and fixing C.P Brass open stop cock of Heavy Quality of specified / approved make or approved equivalent quality or product meeting technical parameters as per specifications and as directed by the Engineer-in-charge. |
| 46 | 15 mm n.b CP Brass open stop cock |
| 47 | Providing and fixing C.P brass bib cock of heavy quality of specified / approved make or approved equivalent quality or product meeting technical parametersas per specifications and as directed by the Engineer-in-charge |
| 48 | 15 mm dia bib cock. |
| 49 | 15 mm Dia LONG BODY bib cock. |
| 50 | Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make or approved equivalent quality or product meeting technical parametersincluding testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 51 | 15 mm n.b |
| 52 | 20 mm n.b |
| 53 | 25 mm n.b |
| 54 | 32 mm n.b |
| 55 | 40 mm n.b |
| 56 | 50 mm n.b |
| 57 | Providing, laying , jointing, fixing and testing heavy quality ( (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make.note: Exposed pipes will also be paid under this item. |
| 58 | 15 mm dia G.I pipe |
| 59 | 20 mm dia G.I pipe |
| 60 | 25 mm dia G.I pipe |
| 61 | 32 mm dia G.I pipe |
| 62 | 40 mm dia G.I pipe |
| 63 | 50 mm dia G.I pipe |
| 64 | 80 mm dia G.I pipe |
| 65 | Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charg |
| 66 | Using SFMC with 50% Quartz aggregate by weight (Only SFMC consumed alone will be measured for payment) |
| 67 | Removing the following sizes of damaged G.I fittings from G.I pipe lines, replacing the damaged fittings with new fittings, testing for leakage etc. complete as per specifications and as directed by the Engineer-in-charge |
| 68 | 15 mm G.I elbow, bend, nipple, socket, tee etc. |
| 69 | 20 mm G.I elbow, bend, nipple, socket, tee etc. |
| 70 | 25 mm G.I elbow, bend, nipple, socket, tee etc. |
| 71 | 32 mm G.I elbow, bend, nipple, socket, tee etc. |
| 72 | 40 mm G.I elbow, bend, nipple, socket, tee etc. |
| 73 | 50 mm G.I elbow, bend, nipple, socket, tee etc. |
| 74 | Providing and fixing Minimum 15 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels |
| 75 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make or approved equivalent quality or product meeting technical parametersconforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) |
| 76 | Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) |
| 77 | Extra for colour anodizing |
| 78 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) |
| 79 | With clear float glass panes of 5.00 mm thickness |
| 80 | Providing and fixing double action hydraulic floor spring of approved brand and manufacturer or approved equivalent quality or product meeting technical parameters (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plat |
| 81 | Providing and fixing 4 Lever Mortice Lock of approved make or approved equivalent quality or product meeting technical parameters suitable for aluminium sections |
| 82 | Providing and fixing approved quality and shape locks cum handle of approved make for sliding shutter |
| 83 | Providing and fixing approved quality stain less steel body roller wheels of approved make or approved equivalent quality or product meeting technical parameters for sliding shutter |
| 84 | Providng and fixing Aluminium Grill 10 mm thick in approved anodising shade of min 15 Microns with a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ sqm including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge. Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sqmm. |
| 85 | Providing and fixing Glazed VITRIFIED floor/dado tiles of approved make or approved equivalent quality or product meeting technical parameters in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make or approved equivalent quality or product meeting technical parameters and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge. For all sizes upto 600 mm x 600 mmnote: Anti-skid tiles shall also be paid under this item. |
| 86 | Providing and laying minimum 25 mm thick uniform shade Kota stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete |
| 87 | Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make or approved equivalent quality or product meeting technical parametersfor internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge |
| 88 | Providing 20 mm thick plastering using Ready mix external plastering compound of approved make or approved equivalent quality or product meeting technical parameters for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding at all height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge |
| 89 | Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks in substructure with minimum 70 kg / Sq.cm strength of approved make or approved equivalent quality or product meeting technical parameters and size in partition walls in C.M 1:4 using crushed sand including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement. (Reinforcement will be paid under relevant item |
| 90 | Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash / Flyash Lime bricks with minimum 70 kg / Sq. cm strength of approved make or approved equivalent quality or product meeting technical parameters and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings. |
| 91 | Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make or approved equivalent quality or product meeting technical parameters and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings. |
| 92 | Designing, providing and fixing of 4 mm thick approved make or approved equivalent quality or product meeting technical parameters and shade Aluminium Composite Metal Panel of approved make or approved equivalent quality or product meeting technical parameters cladding at different locations including soffits of over-hangs and including aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specificationnote : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site. |
| 93 | Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved make or approved equivalent quality or product meeting technical parameters with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge |
| 94 | Providing and fixing anodized aluminium aldrops ISI marked of size 300 X 16 mm transparent or dyed to requried colour or shade with necessary screws etc. complete as directed by the Engineer-incharge |
| 95 | Providing and fixing anodized aluminium tower bolts of size 200 X 12 mm ISI marked of approved make or approved equivalent quality or product meeting technical parameters transparent or dyed to requried colour or shade with necessary screws etc |
| 96 | Providing and fixing anodized aluminium baby latch of size 75 X 12 mm ISI marked of approved make or approved equivalent quality or product meeting technical parameters transparent or dyed to requried colour or shade with necessary screws etc. |
| 97 | Providing and fixing mortice latch and lock of approved make or approved equivalent quality or product meeting technical parameters with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specification |
| 98 | Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make or approved equivalent quality or product meeting technical parameters with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge. |
| 99 | Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodized transparent or dyed to req. colour or shade with necessary screws etc. complete. |
| 100 | Providing and Fixing Homogeneous 2.00 mm thick PVC sheet / tile in flooring and skirting of approved make or approved equivalent quality or product meeting technical parameters in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plaster of paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-incharge in approved colour and shade |
| 101 | Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture or approved equivalent quality or product meeting technical parameters to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 102 | Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer or approved equivalent quality or product meeting technical parameters of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 103 | Antifungal paint |
| 104 | Providing and painting, finishing with antifungal paint with two coats over treated surface all as per manufacturer's specifications and as directed by the Engineerin-charg Please Enable Macros to View BoQ information |
| 105 | Providing and painting, finishing with antifungal paint with two coats over treated surface all as per manufacturer's specifications and as directed by the Engineerin-charg Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender