Tender For Providing And Installation Of India Indai Mark-Ii Deep Well Bore Well For Nadaun Industrial Area Near Helipad Ground At Kohla & Supply Errection Of Sub Machinery Alongwith Allied Accesssores For 7 Inch Bore Well In Tehsil Nadaun Distt. Ham
Tender Value
8.38 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
7 days left
EMD
16769
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of India Indai Mark-Ii Deep Well Bore Well For Nadaun Industrial Area Near Helipad Ground At Kohla & Supply Errection Of Sub Machinery Alongwith Allied Accesssores For 7 Inch Bore Well In Tehsil Nadaun Distt. Hamirpur (Hp.) (Deposite Work.)
BOQ
| Sl. No. | Item Description |
| 1 | Transporation of suitable truck mounted DTH & ODEX/Precussion 1.00 Clayx/RC.Drilling rigs along with accessories etc to the site of work and erection of rig including levelling etc complete in all respects as per the direction of Engineer in charge. |
| 2 | Drilling bores of 200 mm dia. as per IS:2800:1979 from ground level in the oberburden as per direction of Engineer in charge/Hydrgeologist, with suitable rigs for drilling through rocky formation consisting of stand stone, limestone delomitesconglome. |
| 3 | From 0 to 10 mtrs depth |
| 4 | Above 10 mtrs |
| 5 | Supplying and Lowering IS Marked 175 mm NB 6.4 mm thick fincut MSERW casting pipes as per IS: 4270:2001and required of ODEX /attachments from approved manufactures complete in all respects as per the direction of Engineer in charge |
| 6 | Providing and Fixing of suitable casting shoe and bit tube 175 mm dia. of ODEX Attachment complete in all respects as per the direction of Engineer in charge. |
| 7 | Collection and preservation of soil samples in polythene bags complete in all respects as per directions of the Engineer-in-charge |
| 8 | Development of bore well and yield testing with air-compressor through V-Notch and disinfection etc. complete in all respects as per IS:2800:1979 and as per direction of the Engineer-in-charge. |
| 9 | Providing and fixing of submersible pump set of KSB/BS/JHNSTON or reputed make in bore for hand pump for clear water with upto date ammendments submersible pump single phase motor suitable for operation of 240 volts single phase 50 c/s A.C supply and capacity of following performance:- Total head=146.17 meter Discharge 1.28LPS Pump set 5 H.P |
| 10 | Providing and fixing of control pannel for submersible pump complete with shaft and angle iron febricating dully painted and complete internal wiring and comparsing of air break starter main switch of suitable Amp meter J.P volt meter ammeter indicating lamps water level guard and single phase preventer including entire carriage complete in all respects. |
| 11 | Providing and fixing submersible cable to submersible set three core copper cable flat 4sqmm2 Havells, Finolex or any reputed make including carriage complete in all respects. |
| 12 | Providing and fixing M.S. supporting clamps to submersible pump set including all leads and lifts. |
| 13 | Providing and fixing PVC coated rope wire 4mm dia suitable to wear the weight of submersible pump motor pump set and PVC. Pipe etc. complete in all respect including entire carriage of material |
| 14 | Providing & Lowering of 40 mm dia PVC pipe (medium duty with test pressure of 15 Kg. Cm2)3 metres dully socketed and threaded as required complete in all leads and lifts in all respects. |
| 15 | Providing and fixing of gun metal gate valve 40mm dia on delivery pipe and rising main complete in all respects in all leads and lifts. |
| 16 | Providing and fixing of C.I. Adopteromplete in all respects in all leads and lifts. |
| 17 | Providing laying jointing and testing GMS Light pipes including cost of bends complete as per IS: 1239-1979, Part I,, of following diameters in trenches complete in all respect as per direction of Engineer - in Charge. (Earth work in trenches to be measur(Earth work in trenches to be measured and paid for separately) |
| 18 | 65 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender