Tender For Renovation Of Toilet Blocks Adjoining Auditorium In Civil Hospital, Sector-22, Chandigarh.
Tender Value
8.81 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
4 days left
EMD
17650
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Toilet Blocks Adjoining Auditorium In Civil Hospital, Sector-22, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Excavating trenches by mechanical/ manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 4 | All kinds of soil |
| 5 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 11 | Suspended floors, roofs, landings, balconies and access platform |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 15 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 17 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 19 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 20 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 21 | Granite stone slab colour black, Cherry/Ruby red |
| 22 | Area of slab over 0.50 sqm |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 25 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 26 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) |
| 27 | On one side only (2 x 12.08) |
| 28 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 29 | 250x16 mm |
| 30 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 31 | 150x10 mm |
| 32 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 33 | 125 mm |
| 34 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 35 | Profile B |
| 36 | Fixing with adjustable lugs with split end tail to each jamb |
| 37 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 38 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 39 | 12 mm cement plaster of mix : |
| 40 | 1:4 (1 cement: 4 coarse sand) |
| 41 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 42 | 1:4 (1 cement: 4 fine sand) |
| 43 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : |
| 44 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 45 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 46 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 47 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 48 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 49 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 50 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 51 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 52 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 53 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 54 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 55 | Of area 3 sq. metres and below |
| 56 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 57 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 58 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 59 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 60 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 61 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 62 | W.C. pan with ISI marked white solid plastic seat and lid |
| 63 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 64 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 65 | Semi rigid pipe |
| 66 | 32 mm dia |
| 67 | Providing and fixing soil, waste and vent pipes : |
| 68 | 100 mm dia. |
| 69 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 70 | Providing and fixing heel rest sanitary bend |
| 71 | 100 mm dia |
| 72 | Sand cast iron S&S as per IS - 3989 |
| 73 | Providing and fixing collar: |
| 74 | 100 mm |
| 75 | Sand cast iron S&S as per IS - 3989 |
| 76 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 77 | 100 mm inlet and 75 mm outlet |
| 78 | Sand cast iron S&S as per IS - 3989 |
| 79 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. |
| 80 | Internal work - Exposed on wall |
| 81 | 25 mm dia nominal bore |
| 82 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 83 | 15 mm dia nominal bore |
| 84 | 20 mm dia nominal bore |
| 85 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 86 | 25 mm nominal bore |
| 87 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 88 | 20 mm nominal bore |
| 89 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 90 | 45 cm length |
| 91 | 15 mm nominal bore |
| 92 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : |
| 93 | 25 mm diameter pipe |
| 94 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 95 | 15 mm nominal bore |
| 96 | 20 mm nominal bore |
| 97 | 25 mm nominal bore |
| 98 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 99 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 100 | 15 mm nominal bore |
| 101 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 102 | 15mm nominal bore |
| 103 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 104 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 105 | With common burnt clay F.P.S. (non modular) bricks |
| 106 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 107 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 108 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 109 | H D - 20 |
| 110 | Circular shape 560 mm internal diameter |
| 111 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 112 | For pipes 100 to 250 mm diameter |
| 113 | Constructing brick masonry chamber for underground SFRC inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) SFRC cover with frame, R.C.C. top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: (Based on item No.19.30.3.1) |
| 114 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : |
| 115 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 116 | Dismantling of G.I. Pipes upto 50 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement. |
| 117 | Dismantling of C.I Pipes upto 150 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement. |
| 118 | Providing and Fixing of looking glass mirror 5mm thick of approved make with PVC Beading 1-1/2\\" x 3/4\\" with plastic hard board duly fixed on wall with screw/nuts/clips/rod plug etc complete in all respect to the satisfaction of EIC. |
| 119 | Providing and Fixing of G.I. Tank Nipple complete in all respect. |
| 120 | 25 mm |
| 121 | Dismantling of Ceramic tiles or Vitrified and Plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of EIC. |
| 122 | Providing and fixing of C.P. brass Soap dish of approved make complete in all respects. (As desired by EIC) |
| 123 | Providing and Fixing of Chinaware Oval shape counter wash basin with C.I. brackets without pillar taps, 32mm CP brass waste of standard pattren, including painting of fittings and brackets cutting and making good the walls whereever require make as approved by EIC. |
| 124 | Providing and fixing of C.P. brass Pillar Cock with autoclosing system of approved make complete in all respect. (As decided by the EIC) |
| 125 | Providing and Fixing white vitreous china flat back half stall urinal of size 420x395x635mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplingts in C.P. brass, including painting of fittings and cutting and making good the walls and floors whereever required: (As decided by the EIC) |
| 126 | Providing and Fixing of white vitreous chinaware Urinal Partitions of size 90x320x720 mm complete in all respect. Make Cera Cat No. S4090101 |
| 127 | Providing and fixing square-mouth C.I. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight SFRC cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (Based on DSR Item No.19.4.1.1) |
| 128 | 100x100 mm size P type |
| 129 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 130 | Providing and Fixing of Drip Seal Joint complete in all respect. |
| 131 | 100 mm |
| 132 | Providing and fixing C.P. Brass Towel Ring of approved make complete in all respect. (As decided by the EIC) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender