Tender For annual repair & maintenance of Of Sewerage Scheme To Hamirpur Town In Tehsil & Distt. Hamirpur (Hp). (Sh:- Rennovation Of Sludge Drying Bed No. 1 Sewerage Treatment Plant Zone No. 2 At Kakru )
Tender Value
4.98 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
9977
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Of Sewerage Scheme To Hamirpur Town In Tehsil & Distt. Hamirpur (Hp). (Sh:- Rennovation Of Sludge Drying Bed No. 1 Sewerage Treatment Plant Zone No. 2 At Kakru )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited)saturated soil stacking the excavated earth within all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposting of all surplus excavated earth as directed within all leads and lifts including uprooting of trees dressing of beds, and sides and preparation of sub-grade, restoration of unmetalled/metalled/paved surfaces to its original condition including soring, strutting, timbering and dewatering where ever houses, fixing caution boards, crossing over trenches and to the entire satisfaction of the Engineer-in-charge. |
| 2 | Demolition below G.L. upto 1.50 meters depth and disposal of unserviceable materials within 20 mtrs lead unreinforced cement concrete more than15cm thickness and to the entire satisfaction of Engineer in Charge |
| 3 | Disposal of material excavated unserviceable material from site of work to Nallah 5 Kms complete in all leads and lifts.(2nd class) |
| 4 | 15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement mortar(1:4) (1 cement:4 sand). |
| 5 | Providing and laying cement concrete 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size)and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation and plinth in all leads and lifts. |
| 6 | Providing and laying cement concrete 1:1.5:3(1cement:1.5sand:3 graded stone aggregate 20mm nominal size)and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 7 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto all floor level as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 8 | Providing laying mild or tor steel reinforcement for RCC work including bending,binding and placing in position complete up to floor two level Tor steel in all leads and lifts. |
| 9 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering,shuttering,strutting and propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain. |
| 10 | Flat surfaces |
| 11 | Edges |
| 12 | Providing and placing of horizontal layer of filter media duly graded secreened washed and cleaned as specified by Engineer-in-charge. |
| 13 | Bottom layer broken stone 50mm to 75mm |
| 14 | 2nd layer of crushed stone aggregate 25mm to 40 mm |
| 15 | 3rd layer of crushed stone aggregate 20mm to 25 mm |
| 16 | 4th layer of crushed stone aggregate 10mm to 20 mm |
| 17 | 5th layer of crushed stone aggregate 6 mm |
| 18 | Top layer Fine sand (Eff. Size 0.20mm to 0.40mm and Uniformity co-efficient 2.00 to 3.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender