Tender For Augmentation Of Receiving Station In Ganderbal District For Std-Ganderbal (Augmentation Of Receiving Station Ajar From (1X10+2X6.3) Mva To (2X10 + 1X6.3) Mva Pddss2627100318.
Tender Value
58 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
6 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Receiving Station In Ganderbal District For Std-Ganderbal (Augmentation Of Receiving Station Ajar From (1X10+2X6.3) Mva To (2X10 + 1X6.3) Mva Pddss2627100318.
BOQ
| Sl. No. | Item Description |
| 1 | Augmentation of Receiving Station in Bandipora District (Augmentation of Receiving Station Ajar from (1x 10 + 2x 6.3) MVA to (2x10 + 1x 6.3) MVA): PDDSS2627100318 |
| 2 | Installation, testing & commisioning of the new 10 MVA Power Transformer (to be provided by ECSD Pampore) including connection of cables, jumpers etc & all accessories including HT and LT Terminal connections/control wiring. |
| 3 | Providing, installing, testing, and commissioning of complete earth strengthening works for the Power Transformer to achieve a combined earth resistance of less than 1.0 Ohm as per IS 3043 and CEA regulations. Scope includes excavation, boring, supply and installation of maintenance-free chemical copper-bonded earth electrodes (min. 3m long, 50mm dia, 250 microns coating) with eco-friendly backfill compound; dedicated redundant earthing for Transformer Neutral (min. 2 separate pits) and body; supplying and laying of GI/Copper flats (min. 50x6 mm) buried at 600mm depth for grid interconnection; providing pre-cast RCC inspection chambers with heavy-duty covers and test links; exothermic welding/bolting with anti-corrosive bitumen painting over joints; and final testing. Note: The rate is all-inclusive of labor, materials, tools, excavation, and backfilling required to complete the job in all respects. |
| 4 | Supply, Installation, testing & commisioning of 33 kV C&R Panel along with 3-O/C, 1-E/F , 2-3 element based Digital programeable based SCADA compatible relays and differential relay and REF protection (IEC61850) with digital programeable SCADA compatible, mimic diagram, Digital Programeable Voltmeter, Ammeter, LED Annunciation Windows with annunciation relays, Semaphors, Auxilliary relays of 4 sets having alarm and tripping relays. Hooter/Buzzer inbuilt 3-phase Tri-vector meter -5 Amps, DLMS Compliant with RS-485 port and extra terminals for remote switching of switchgear. (GTP to be approved) |
| 5 | Supply, Installation, testing & commisioning of 33 kV Vacuum Circuit Breaker (36 kV, 1250A, 26.2 kA, Outdoor Type) with allied accessories and heavy duty pad clamps. (GTP to be approved) |
| 6 | Supply & laying of multi core 12-core 2.5 sq.mm Copper Armoured control cables with suitable brass/PVC glands for each cable including codding, thimbling and labelling of each cable interconnection and terminations. |
| 7 | Supply & laying of multi core 6-core 2.5 sq.mm Copper Armoured control cables with suitable brass/PVC glands for each cable including codding, thimbling and labelling of each cable interconnection and terminations |
| 8 | Supply & laying of multi core 4-core 2.5 sq.mm Copper Armoured control cables with suitable brass/PVC glands for each cable including codding, thimbling and labelling of each cable interconnection and terminations |
| 9 | Supply and Installation of 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm with fitting |
| 10 | Providing and Installation of 33 kV Current Transformer (33 kV, 1Φ, 2 Ratio 3 Core, Outdoor) (1 No. per Φ) (400-200/5-5A) /(300-150/5-5A) |
| 11 | Providing and Installation 33 kV Lightening Arrestors (33 kV, 10kA, Station class, ZnO, Polymer) gap less (1 No. per Φ) |
| 12 | Supply, Installation, testing & commisioning of 33 kV Isolator with Earthing Blade (36kV,800A, Outdoor,3 poles, 25 kA) |
| 13 | Supply, Installation, testing & commisioning of 33 kV Isolator without Earthing Blade (36KV,800A,Outdoor,3 poles,25 KA) |
| 14 | Supply,Installation, Testing and Commissioning of 11 kV VCB Panel Board (1+1, 1 No. of incommer panels with CTR 800-400/5-5A & 01 No. of outgoing panels with CTR 600-300/5-5A ) (12 kV, 1250A, 25 kA, indoor) with O/C, E/F relays (IEC61850), Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows with annunciation relays, 3- phase Tri-vector meter -5 Amps, DLMS Compliant with RS-485 port Suitable for outgoing Feeders. (GTP to be approved) |
| 15 | SITC of adaptor Kios comprising of 1250 AMP copper Bar to match bus allingment of New panel with existing 11KV panel. The Job includes providing of 1250 Amp Solid/ Flexible coper busbar along with necessary 11KV pannel insulaors and electroplated but bolts |
| 16 | Supply,Installation, Testing and Commissioning of 11 Mtr. Long Pole ( ST-410 SP56) |
| 17 | Providing & Laying of Cement bottoming 1:2:4 mix as per REC standards 0.66 cum/pole |
| 18 | Providing and Fixing Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm |
| 19 | Providing and Painting of Red Oxide paint on ST Poles as per REC standard. |
| 20 | Providing and Painting of Aluminium paint on ST Poles as per REC standard |
| 21 | Providing and installation of Danger Plates with Clamps |
| 22 | Providing and installation of Anti-Climbing Device with Clamps |
| 23 | Providing and Fixing of Galvanized Nuts and Bolts |
| 24 | Providing & fixing of GI Channel Iron./ iron Angles/ flat iron of sorts for equipment structure and Gantry structures including cutting, bending, drilling, welding etc complete modification as per site requirement. |
| 25 | Supply, Installation, testing & commisioning of 200 mm² ACSR Conductor Panther |
| 26 | Supply and installation of 33 kV 10kN Polymer Post Insulator 36kV,170kV Impulse, creepage distance 1224m |
| 27 | supply and installation of 33 kV Single Tension Fittings (6 bolt) |
| 28 | supply and installation of T Clamps/pad clamps |
| 29 | supply and installation of Earthing Electrode ( 3m long 40mm dia GI pipe) through GI Strip (50x6)mm 4 Mtr long. |
| 30 | supply and Laying of HDPE Pipe Outer Dia 160 mm Inner Dia 148 mm for laying of 11kV XLPE Cable from Power Transformer to Control Room including excavation and laying |
| 31 | Providing and fixing of Lugs and Ferrules |
| 32 | Providing and laying of Earth mat of required size as per design within the excavated quantity of yard of 50x8 mm Gl Strip including cutting, bending, drilling, welding etc as per termination requirement with Torsion solid rods of 3meters long, 32mm dia with pointed tip for Ground insertion with the excavated cavity and improvement if required to get desired earthing resistivity values for 33kV and 11kV yards. The mesh should be inter- connected to each and every point for redundency and a anti-corrosive powdered paint coat to be applied at welded joints |
| 33 | supply and installation of 11 kV ,630 mm² Single Core ,XLPE armoured Cable FRLS |
| 34 | Providing & Fixing of 11 kV Indoor Heat Shrinkable Cable Termination Kits suitable for above mentioned cable. |
| 35 | Providing & Fixing of 11 kV Outdoor Heat Shrinkable Cable Termination Kits suitable for above mentioned cable. |
| 36 | Supply of Tool Kit ( Stanley / Taparia Make) comprising of :- 1. Double end Spanners 14 Piece set ( 6 x7, 8x9,10x11,12x13,14x15,16x17,18x19,20x22 ,21x23,24x27,25x28,30x32 mm), Ring Spanner set 12 Piece set ( 6 x7, 8x9,10x11,12x13,14x15,16x17,18x19,20x22 ,21x23,24x27,25x28,30x32 mm), 2.Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), 2 Sets 3. Combination Screw Driver set Cushion Grip, 4. Pipe Wrench 12 Inch 1 No. 24 Inch 1 No., 5. 12\\" Adjustable Chrome plated Wrench, 6. 8\\" COMBINATION PLIER Line man plier, 7. 8\\" LONG NOSE PLIER LENGTH NOSE PLIER, 10. 9\\" CRIMPING PLIER SET, 230MM-, 11.. 7\\" LENGTH CUTTING PLIER, 12. HEX KEY(LN Key) SET 11PC METRIC (1.5, 2, 2.5, 3, 4, 5,5.5, 6, 8, 10mm 12mm), 13. 27PC-1/2 SQ. DR 12PT SOCKET SET ( comprising of ) 20 PC :- 1/2 Drive 12 Point Sockets: 10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,30,32mm6 PC :- 1/2 Drive Accessories : 2 PC Extension Bar: 5 and 10(125 and 250mm) Universal Joint,1 PC :- 14. Spark Plug Socket 6 Point 13/16, 1 PC Sliding T-bar 10(254mm); 1 PC Flip-Drive Rachet., 1/4\\" Torque Rench, 914mm , 36 Inch Bolt Cutter, 12\\" Hecsaw Frame with 12 No. spare Blades, Steel body Retactable Utility Knife with 12 No. spare Knives, 12\\"h 340gms Ball Pien Hammer wooden Handle, 16\\" 900gms Ball Pien Hammer wooden Handle, 5 Mtr Measuring Tape, Cold Chesel 7/8\\" (22mm), Centre Punch 8mm (15/16\\" )x 115mm(4 1/2 \\"), Good Quality Multi Meter ( Fluke Make 303/ equivalent), 24\\" Magnetic Torpedo/ beam Level (3Vails) 300mm -1 No. & 600mm -1No.,1No.Grinder, 2-to 12mm Dril, , 50 KG rope, 5 MT Pullig machine Rachet typt( Cain Host Liver nlock with 4Mtr chain , 1No.cutter and 1 No. 300 Amp Portabe single phase welding machine with 10 Mtr lead and 5box welding Rods and 3 No.Rope Pulley |
| 37 | Providing & fixing a. Battery Bank 30 V,100 AH , of 15 No. cells of 2 V each, sealed maintenance free VRLA type,High impact Polyprophelene copolymer container,flame retardant. b. 30V,100 AH , Float-Cum-Boost Charger With Full wave rectification for 220 V, 1Phase, 50 HZ AC Input Supply . |
| 38 | Yard Lightening by way of SITC of: |
| 39 | 8.0 mtr Long GI (65 micron DFT single dip) Octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 155 mm x 70mm & base plate of 260x260x16mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts (J Type) M20x700 mm long (Set of 4 no.’s per pole) |
| 40 | Laying of RCC foundation for 8.0 mtr. Long Octagonal poles including proper curing. 0.585mX0.585mX1.0m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole). |
| 41 | Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm |
| 42 | Pre fabricate galvanized single way top bracket (1000mm long with 48.3 OD GI Pipe) to be fitted on top of Octogonal pole for holding lighting |
| 43 | DK thermoplastic cable Junction/ Termination T boxes 8\\"x10\\"of class IP55/IP65 fitted with two 2-5 Amp MCB strip,4-way terminal block / connectors Incl. copper lugs, Clamps ,nut & bolts washers etc (Hansel or equivalent make) or poles with two way type bracket to be fitted properly inside the door opened gear box provided on thebottom side of the pole. |
| 44 | 120/190 Watt LED Luminaries of IP 67 protection |
| 45 | Surge Protector for the 120/190 watt LED type lighting fixture complete |
| 46 | 3X1.5 mm PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop & earthings laid properly. |
| 47 | HDPE pipe 50 mm O/D and inner Dia 38 mm including trench excavation in hard soil (0.3x0.45x1000m) for laying of 25/16 sq mm Almunium armoured cable . The job further inludes refilling back the same and removal of surplus excavated material to an appropriate place. |
| 48 | LT 16 mm² 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping. |
| 49 | Civil Works |
| 50 | Earthwork in excavation over areas (exceeding 30 cms in depth, 1.5m in width as well as 10 Sqm on plan) incld. disposal of excavated earth, and lift upto 1.5m, (All kinds of soil). By mechanical means |
| 51 | Providing & laying of stone soling in level. |
| 52 | Providing & laying of 25mm to 40mm Gravel in Yard area with average hieght |
| 53 | Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:4:8 (1 cement :4 coarse sand :8 graded stone agg. 40 mm nominal size (Crushed) |
| 54 | Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:2:4 (1 cement :2 coarse sand :4 graded stone agg. 40 mm nominal size (Crushed) M-15 Grade PCC |
| 55 | Providing and laying in position specified grade of reinforced cement conc. excluding the cost of centering, shuttering, finishing -and reinforcement All work upto plinth level, M20 grade concrete |
| 56 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 57 | Centering & shuttering incld. strutting, propping etc. & removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 58 | 12 mm thick cement on the rough side of single or half brick wall of mix:1:6 (1: cement :6 fine sand) |
| 59 | Supplying/fixing at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. ( 6Lx4Bx2H) also Gate and angle Frame for Cable rench cover |
| 60 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge |
| 61 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 62 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats |
| 63 | Finishing walls with Acrylic smooth exterior paint of required shade: Old work (one or more coats applied @ 0.90 liters/ 10sqm |
| 64 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 65 | Modification of Existing Electric Wiring by way of Dismantalling of existing wiring system and re-errection of the same including necessary modification where ever required including providing of one number 32 amp heating socket with accessories , one number of 250 mm exhaust fan and 10 No's lighting point including necessary swith board and led blub fixture. The Job also Includes 01 No. of 12 way SPN DB 2 Fans, 20 LED lamps & 20 switches |
| 66 | Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 67 | Construction of wardrobes / almirah for security of official records |
| 68 | Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, (fittings to be paid separately). 18mm Flat pressed 3 layer particle board or graded wood particle board grade-I type-II conforming to IS” 3087 edges to be painted with polyurethane primer |
| 69 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) :18mm Flat pressed 3 layer particle board or graded wood particle board IS:3087 |
| 70 | Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete 75x50x2.50 mm |
| 71 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc 50 mm |
| 72 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 100x10 mm |
| 73 | Providing and fixing bright finished brass handles with screws etc. complete :125mm |
| 74 | Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. Triple strip (Vertical type) |
| 75 | Providing and fixing Ist quality ceramic/ Verified glazed wall tiles conforming to IS : 1562(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 76 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge: |
| 77 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 78 | Providing and laying vitrified floor tiles/Stair steps Columns etc. in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 79 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) ( 7'x5')First class kail wood |
| 80 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 81 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:40mm Flexible pipe |
| 82 | Providing and fixing CP Brass Single lever sink wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 83 | Foundation /Anchor Bolts 500mm Long. 20 mm Dia with U atomm and 3 Nuts & 4 Washers |
| 84 | Supply & installation of Display sign board for the Receiving Station made of a G.I. / M.S. frame of specified structural thickness, covered with 3mm thick aluminum/ACP sheet on the face on structural steel poles / wall-mounted fixtures Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender