Tender For Provn Of Defenders Of Kutch Wall & Connected Items Alongwith Addn/ Altn To Windows & Doors Of Smc And Provn Of Septic Tank, Soakage Well & Sewage Line Near Shopping Complex And Special Repair To Certain Md Accn At Cwe & Mes Colony At Af St
Tender Value
38.85 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
14 days left
EMD
77700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Defenders Of Kutch Wall & Connected Items Alongwith Addn/ Altn To Windows & Doors Of Smc And Provn Of Septic Tank, Soakage Well & Sewage Line Near Shopping Complex And Special Repair To Certain Md Accn At Cwe & Mes Colony At Af Stn Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenchs n. exc 1.5m wide and n exc 1.5m in depth; for foundation, etc of for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plain and n exc 1.5 m in depth and getting out I soft/loose soil complete all as specified and directed |
| 2 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point. |
| 3 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil. |
| 4 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete. |
| 5 | M&L for precast solid block masonary 1:3:6 (type C1) straight or curved on plan exc 6m mean radius, exc 10 cm width and set in CM (1:6) etc complete all as specified gradiant camber complete all as specified and directed |
| 6 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and softs (if any) of foundation and plinth beams, and similar work, vertical or to batter for fair finished surfaces of concrete complete all as specified and as directed by the Engineer-In-Charge. |
| 7 | Material & Labour for reinforced cement concrete M-25 (nominal mix) using 20MM grades stone aggregate as in column footings ,plinth beams Complete all as specified and as directed by the Engineer-In-Charge. Note:- Reinforcement steel and formwork shall be measured and paid for sepatately. |
| 8 | M&L for formwork to sides of pillars, posts, piers, struts, columns and stanchions for fair finished surfaces of concrete complete all as specified and as directed by the Engineer-In-Charge. |
| 9 | Material & Labour for Reinforced cement concret M-25 (nominal mix) using 20MM grades stone aggregate as in columns, gate pillar etc Complete all as specified and as directed by the Engineer-In-Charge. Note: - Reinforcement steel and formwork shall be measured and paid for sepatately. |
| 10 | M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, plinth beam etc.fair finished surfaces of concrete flat complete all as specified and as directed by the Engineer-In-Charge. |
| 11 | M&L for reinforced cement concrete M-25 nominal mix) using 20mm graded stone aggregate as in lintel beam,floor/roof beam, plinth beam,lintel beam for extra grating for water drainset complete all as specified and as directed by the Engineer-In-Charge. Note:- Reinforcement steel and formowork shall be measured and paid for sepaterly. |
| 12 | M&L for Mild steel bars 10mm dia and over, cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips |
| 13 | M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 14 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), finished the surface even and fair without using exta cement |
| 15 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 16 | Supply only water proofing compound complete all as specified and as directed by Engineer in charge. |
| 17 | M&L for 18-20 mm thick granite, (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded. |
| 18 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & directed |
| 19 | M&L for engraving/ marking words on granite surface in alphabets and numeric naming etc with laser etching or sand blasting complete all as specified.Note:- Size of alphabet shall be decided by GE. |
| 20 | M&L surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in disintegrated/dense soil.complete all as directed. |
| 21 | M&L for filling of sand filling as in screed bed for PCC interlocking paver block including spreading leveling, and well ramming complete all as specified. |
| 22 | Material & Labour for machine pressed precast concrete interlocking paver block with grey cement and pigment of approved shape and size of 60 mm thickness confirming to IS 15658-2006, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer chemical coating on top surface, over gray cement and pigment all as specified and directed. |
| 23 | M&L for providing and laying at or near ground leval factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointd with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints at sharp curve shall not to more than 5 mm), inclduing making drainage opening whereever rewired all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 24 | M&L for providing and laying at or near ground leval factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointd with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints at sharp curve shall not to more than 5 mm), inclduing making drainage opening whereever rewired all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender