Tender For Design, Manufacturing, Installation, Testing And Commissioning Of 11Kv Xlpe Power Cable, Grounding System And Its Associated Works At Cwcp, Frfcf, Kalpakkam
Tender Value
94.54 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
14 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design, Manufacturing, Installation, Testing And Commissioning Of 11Kv Xlpe Power Cable, Grounding System And Its Associated Works At Cwcp, Frfcf, Kalpakkam
BOQ
| Sl. No. | Item Description |
| 1 | Fabrication, manufacturing including design, inspection and testing at manufacturer’s works, documentation including submission of relevant data, packing, transportation from manufacturer works to site, unloading and installation in ground, testing at site and commissioning of 6.35 / 11 kV (E) grade, 3 Core X 400 Sq.mm, stranded compacted & circular Aluminium water tight conductor followed by semi conducting water swellable tape, conductor screen with Extruded semi conducting compound, Extruded WTR XLPE Insulated, Insulation screening with Extruded semi conducting compound, followed by water swellable semi conducting tape and single layer of copper tape(suitable to carry 1.12 kA/1 sec each core) and water swallable semi conducting tape, cores laid up with center filler, Extruded FRLSH PVC type ST-2 inner sheath followed by layer of poly Al. tape and HDPE type ST-7 intermediate sheath followed by single layer of Galvanized steel round wire armoured and overall Extruded FRLSH PVC type ST-2 sheathed cable generally conformes to IS 7098 part-2 and IEC 60502-2 with latest amendments and as per the tender specification. |
| 2 | Fabrication, manufacturing including design, inspection and testing at manufacturer’s works, documentation including submission of relevant data, packing, transportation from manufacturer works to site, unloading and installation in tray & built in trench, testing at site and commissioning of 6.35 / 11 kV (E) grade, 3 Core X 400 Sq.mm, stranded compacted & circular Aluminium water tight conductor followed by semi conducting water swellable tape, conductor screen with Extruded semi conducting compound, Extruded WTR XLPE Insulated, Insulation screening with Extruded semi conducting compound, followed by water swellable semi conducting tape and single layer of copper tape(suitable to carry 1.12 kA/1 sec each core) and water swallable semi conducting tape, cores laid up with center filler, Extruded FRLSH PVC type ST-2 inner sheath followed by layer of poly Al. tape and HDPE type ST-7 intermediate sheath followed by single layer of Galvanized steel round wire armoured and overall Extruded FRLSH PVC type ST-2 sheathed cable generally conformes to IS 7098 part-2 and IEC 60502-2 with latest amendments and as per the tender specification. |
| 3 | Supply, installation, testing and commissioning of Raychem make 3 Core x 400 Sq. mm Heat Shrinkable Cable end Termination without gland for 3 Core Aluminium Conductor, 11 kV, XLPE insulated cables (indoor). (Refer Sec VI, Clause No.10.5). |
| 4 | Supply, installation, testing and commissioning of the Straight Through Joint (Crimping type) for 3 Core x 400 Sq. mm Raychem make Heat Shrinkable Cable Jointing Kits (Mechanical Connector type/Crimping type) Rayfit tubing for 3 Core Aluminium Conductor, 11 kV (E), XLPE insulated cables including excavation of soil, backfilling etc as specified.(Refer Sec VI, Clause No.10.6). |
| 5 | Supply, fabrication and installation of 50 mm X 6 mm size of Copper Flats in Built in trenches, on walls, poles, RCC Concrete and through embedded pipes as per the tender specification. (Refer Sec VI, Clause No.12.7). |
| 6 | Supply, fabrication and installation of the 50 mm X 6 mm size of Copper Flats in ground including excavation and refilling as per the tender specification. (Refer Sec VI, Clause No.12.7). |
| 7 | Cleaning of Indoor Substation Cable trenches and Motor area cable trench as directed by Engineer-in-Charge. Measurement will be per meter (length) basis of cable trench.(Refer Sec VI (MNC), Clause No.26). |
| 8 | Removal, shifting and reinstallation of complete Earth pit including Plate Earth Electrode, RCC Chamber and RCC cover slab with in 500 meter. Reinstallation shall be completed and tested as per IS: 3043 and as per Drawing No. IGC/ESD/5060/1001/1 enclosed. (50 Kg. each Bentonite & Charcoal shall be provided for each earth pit). (Refer Sec VI, Clause No.12.2). Scope include Excavation and refilling. |
| 9 | Supply, installation and testing of Copper Plate Earth Electrode as per IS: 3043 including Excavation, RCC Chamber and RCC cover slab as per Drawing Nos. IGC/ESD/5060/1001/1 & IGC/ESD/5060/1008/1 are enclosed. (50 Kg. each Bentonite & Charcoal shall be provided for each earth pit).(Refer Sec VI, Clause No.12.1 & 12.2). |
| 10 | Retrieval of the already laid one number 1100 Volts Grade XLPE/HRPVC insulated, Stranded Aluminium conductor cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of GI spacer, clamps etc and relaying the same cable in built-in trenches, on walls, poles and through embedded pipes using the retrieved spacer & clamp & supplying the shortage spacer & clamp if any as per the detailed specification. (Refer Sec VI, Clause No.7) |
| 11 | upto 3/3.5/4 C X 25 Sqmm |
| 12 | 3/3.5/4 Core Above 25 & Upto 120 Sqmm |
| 13 | Excavation of soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2) |
| 14 | Supply and Installation of MS fabrication 1 coat primer & 2 coats synthetic enamel paint, MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender