Tender For Special Repair Work (Surfacing/Coating) On The Road From Kasturipur To Lalipur Kariyau, Extending From Bhaisahiya Village To The Scheduled Caste Settlement (Basti) Up To The House Of Yashwant Rao Ambedkar.
Tender Value
19.86 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
3 days left
EMD
39800
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadohi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Work (Surfacing/Coating) On The Road From Kasturipur To Lalipur Kariyau, Extending From Bhaisahiya Village To The Scheduled Caste Settlement (Basti) Up To The House Of Yashwant Rao Ambedkar.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road and including uprooting wild vegetation, grass. Bushes shrubs. Saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thicknees as per Technical Secification Clause 201. |
| 2 | Providing, laying, spreading and compacting stone aggregates of specific sizes (45-63 mm) to water bound macadam secification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materiats to fill up the interstices of coarse aggregate, watering and compacting to the required density WBM Grading-2 as per Technical specification Clause 405. |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to be required density. WBM Gradeing-3 as per Technical Specification Clause 405. |
| 4 | Construction of Subgrade & earthen shoulders with approved material obtained from borrow pits whth a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300. 1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 303.1 for patri |
| 5 | Excavation for roadway in soil using manual means for carrying of out earth to embakment site with a lift upto 1.5 m and lead up to 50 m as per Technical Specification Clause 302.3 |
| 6 | Laying brick soling layer on prepared sub-grade with brick on edging according to lines. Graded and cross- section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling. Watering and rolling as per technical specification Clause 412. |
| 7 | Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means as per technical specification Clause 502. |
| 8 | Providing and applying tack coat with bitumen using pressure distributor at the rate of 0.35 kg per sqm on the prepared non bituminous surface cleaned with hydrolic broom as per temechanical specificatiob clause 503. |
| 9 | Providing, laying and rolling or open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity. finished to required level and grages to tbe followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. |
| 10 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C (i) as per Technical Specification Clause 510 (5.12) |
| 11 | Supply and fixing of sign board etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender