Tender For Renovation Works To Existing Workshop Building For Solar Technician (Electrical) Trade In Industrial Training Institute, Thiruverumbur, Trichy-14.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
8 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Works To Existing Workshop Building For Solar Technician (Electrical) Trade In Industrial Training Institute, Thiruverumbur, Trichy-14.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing of Un Plasticized Poly Vinyl Chloride (UPVC) Partition made of Outer frame of size 60/60 mm, Mullion of size 76/60 mm, Panel of size 150/20 mm, 1.8mm full Reinforcement, Drainage - face, White colour with 5mm thick plain glass etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door. Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. |
| 3 | Supply and fixing MS Box Section of size following size and thickness including material and labour charges etc., complete complying with standard specification and as directed by the departmental officers. |
| 4 | Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is-63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 +3.5+0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed wiher Sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard Specification as directed by the departmental officers |
| 5 | Supplying and Placing Worktable of 8' x 2' with Electric Plugs etc., complete complying with standard specification and as directed by the departmental officers. |
| 6 | Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 and above 20mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments and polishing with floor polisher to a high degree of finish etc., complete complying with standard speicification and as directed by the departmental officers.(The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 7 | Earth work excavation for foundation byMechanical means for Isolated & CombinedFooting etc in all soils and sub-soils and to fulldepth as may be directed except in rockrequiring blasting inclusive of shoringshuttering, bailing out water wherever necessaryand depositing the surplus earth within thecompound in places shown by the departmentalofficers with an initial lead of 100 mts andclearing and levelling including dressing of sidesand raming of bottoms etc., complete complyingwith standard specification and as directed by thedepartmental officers.- Upto 2.40m FootingDepth. |
| 8 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stonejelly) using 40 mm gauge hard broken granitestone jelly for foundation including dewateringwherever necessary and laid in layers of notmore than 15 cm thick well rammed,consolidated and including curing etc. completecomplying with standard specification and asdirected by the departmental officers. -Mixing bymanual means |
| 9 | Brick work in following Cement Mortar 1:5using best quality Fly ash Brick of size230x110x70mm with class designation of 7.5conforming to IS 13757-1993 or IS 12894-2002for foundation and basement including Cost ofMortar Plasticizer, curing,etc., completecomplying with standard specification and asdirected by the departmental officers. Brickworkshall be done as per IS 2212-1991 adoptingEnglish Bond generally. other type of bond shallbe done as directed by the Executive Engineer incharge. |
| 10 | Supply and filling in foundation and basementwith Gravel in layers of not more than15cm.thick well rammed watered and compactedwith surface vibrator, watered and consolidatedetc. complete complying with standardspecification and as directed by the departmentalofficers. |
| 11 | Plain Cement Concrete 1:2:4 (one cement, twocrushed stone sand and four hard broken stonejelly) using 20mm jelly for wearing coatincluding laying, compacting, finishing andcuring, etc., complete as per standardspecificatins and as directed by the departmentalofficers.- Mixing by manual means |
| 12 | SUB TOTAL |
| 13 | GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender