Tender For Revitalization Of The Main Entrance Gate At Okhla Barrage In Delhi State
Tender Value
31.35 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
4 days left
EMD
64000
Bank guarantee accepted
Document Fee
354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revitalization Of The Main Entrance Gate At Okhla Barrage In Delhi State
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation in ordinary soil ( loamy clay or sand ) i/c. lift upto 1.5 metre and lead upto 30 metre and i/c. back filling,watering and ramming of excavated earth into trenches and disposal of surplus earth as directed by Engineer-in-charge with cost of labour and T&P etc.required for proper completion of work. |
| 2 | Providing & laying 80 mm. thick factory made C.C. Interlocking tiles/paver including 50mm. Thick compacted bed of fine sand proper embedding/laying of interlocking tiles leveling and dressing of surface to required level and slope,filling joints with fine sand and below it laying 0.10m. thick base concrete in 1:3:6 with cost of all materials,labour and T&P etc required for proper completion of work. |
| 3 | Providing & laying of Cement Concrete in 1:3:6 (1 cement:3 coarse sand:6 stone grit 20-40 mm.size) including cost all materials ,labour and T&P etc. required for proper completion of work. |
| 4 | Providing & fixing Centering & Shuttering for C.C. Work i/c. rent of shuttering material ,labour and T&P etc. required for proper completion of work. |
| 5 | Steel Reinforcement for R.C.C. Work i/c. it's straightening, cutting, bending, binding, cutting and placing in position and cost of binding wire with cost of all materials, labour and T&P etc. required for proper completion of work. |
| 6 | Providing & laying R.C.C. 1:1.5:3 (1 Cement :1.5 Coarse sand : 3 Grit 12-20 mm.size) i/c. cost of all materials, labour and T&P etc. but excluding cost of reinforcement required for proper completion of work. |
| 7 | Providing & fixing Centering & Shuttering for R.C.C. Work i/c. rent of shuttering material ,labour and T&P etc. required for proper completion of work. |
| 8 | Brick work in 1:4(1cement:4coarse sand) cement coarse sand mortar including cost of all materials,labour and T&P etc. required for proper completion of work. |
| 9 | 12.50mm thick cement plaster in 1:4 (1Cement:4Coarse sand) cement mortar i/c. cost of all materials, labour, and T&P etc . Required for proper completion of work. |
| 10 | Sal wood work in chaukhat frame with M.S. hold fast i/c. cost of all materials,labour and T&P etc. required for proper completion of work. |
| 11 | Providing & fixing M.S. or iron work of small and section such as M.S. grills & railling etc.including rivetting or welding where necessary with cost of all materials,labour and T&P etc. required for proper completion of work. |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply venee ring with vertical grains or cross bands and face veneers on bothfaces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 13 | Supply and fixing of 4.5 cm. thick C.P. teak wood glazed shutter in window including all necessary fittings with cost of all materials ,labour and T&P etc. required for proper completion of work. |
| 14 | Providing and fixing wire gauge shutters using S.S. 304 wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 15 | Providing wall putty on new surface with approved quality material of berger/J.K./Birla or similar make two coat over plastered surface to prepare the surface even and smooth complete. |
| 16 | Providing & laying vitrified floor tiles size 600X600mm with water absorption less than 0.8% and conforming to to IS:15622,of approved make in all colour and shades,laid on 20mm. Thick cement mortor 1:4 (1cement : 4 coarse sand) jointing with grey cement [email protected] kg/sqm i/c. grouting the joints with cement and matching pigment etc. complete |
| 17 | Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. |
| 18 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 19 | Finishing walls with Acrylic smooth exterior paint two coat of approved make of required shade on old surface by engineer-in-charge to give even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material including cost of all materials, labour and T&P etc. for proper complition of work . |
| 20 | Distempering two coats with oil bound distemper i/c. cost of all materials,labour and T&P etc. complete. |
| 21 | Painting two coat over primming coat on steel and other metal surface including cleaning the surface of all dirt,dust and other foreign matter,sand papering and stopping i/c. cost of all materials, labour,T&P etc. required for proper completion of work. |
| 22 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. 1.3.1 Group A |
| 23 | Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 24 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 A switch |
| 25 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 A socket outlet |
| 26 | Supplying & fixing DP sheet steel enclosure on surface/recess along with 25/32 A 240 V \\"C\\" Curve DP MCB complete with connections, testing and commissioning etc as required . |
| 27 | Supplying and fixing, testing Commising of 4.5m Height Decorative victoria pole with double arm bracket (Differential level) and light with one metor cast iron designed base, pipe in MS grooving and light 60 watt both side complete. |
| 28 | Supplying and fixing of High Mast Lights including cost of high mast shaft, construction of foundation, outdoor stand mounted feeder piller with 32 A TPN MCb incomer,single dial time switch 45 A TP contractor 240 Watt dia-cast Aluminium IP 65 flood light with high power LED fixture Havells and civil foundation M-20 Grade with material and installation,testing, commisioning with complete lights wiring work. feeder pillerproviding with 2 np GI pipe earthing works including all complete. |
| 29 | Supplying and laying of 25 Sqmm 4 core Cable aluminum conductor PVC insulated armored sheathed cable 1100 volts grout with M.S. clamps of suitable size as directed by Engineer-in-charge, complete in all respect. Armoring shall be properly connected by clamps (Four underground laying cable shall be placed at a depth of 750 mm below ground level over a cushion of 75 m thick and all around and protected with bricks on sides and top). |
| 30 | Supplying and laying of PVC insualeted and PVC sheated/ XLPE power cable of 1.1 KV grade of up to 35 mm size direct in ground including excavation ,sand cuisioning, ptotective covering and refilling the trench etc as required |
| 31 | Polishing in high gloss/matt finish melamine clear polish on wood work in required colour/wooden shade texture surface including cleaning the surface of all dirt, dust and other forain matter, sand papering and stopping i/c cost of all materials, labour, T&P etc. required for proper completion of work. |
| 32 | Providing and fixing of Gates including of all materials, labour, T&P all lead and lift required of proper completion of work . Total Weight of Gate 1217 Kg. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender