Tender for Tender for Wet West Processing Unit Hetu Pipe Foundation Ka Karya
Tender Value
35.50 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
9 days left
EMD
3.55 Lakhs
Bank guarantee accepted
Document Fee
2300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kheri → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Wet West Processing Unit Hetu Pipe Foundation Ka Karya
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out theAll Kinds of soil |
| 2 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 3 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor: |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto plinth level 1:4:8 (1 Cement: 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size) |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 6 | Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto the bottom of pile cap) 300 mm dia piles. |
| 7 | Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading plateform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and desmanteling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Note: I Initial and Routine Load Test shall not be carried out by Dynamic method of testing PUR Note: 2 Testing agency shall submit the design of loading plateform for the approval of Engineer-in-charge Group of two or more piles upto 50 tonne Safe capacity. Initial test (Test Load 2.5 times the safe capacity) |
| 8 | Routine test (Test Load 1.5 times the safe capacity). |
| 9 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but including the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.\\"(Note: Cement content considered in this item is @ 330 Kg/cum. \\"Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level |
| 10 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but including the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. \\"(Note: Cement content considered in this item is @ 330 Kg/cum. \\"Excess/ less cement used as per design mix is payable/recoverable separately). All work from plinth level upto floor level. |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Add 18% GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender