Tender For Repair And Renovation (Balance Work) Of Maharaja Ranjit Singh A.F.P.I At Sector 77 Sas Nagar (Mohali).
Tender Value
26.27 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
1 days left
EMD
52548
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
S.a.s Nagar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation (Balance Work) Of Maharaja Ranjit Singh A.F.P.I At Sector 77 Sas Nagar (Mohali).
BOQ
| Sl. No. | Item Description |
| 1 | Raising of Existing Boundary WallDismantling brick work tile masonary or tile lining. (b) In cement. |
| 2 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 3 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres. |
| 4 | Cement concrete 1:5:10 with 40 mm gauge stone ballast.using concrete mixer volumetric type (b) 40 mm guage. |
| 5 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. |
| 6 | 40 mm thick cement plaster D.P.C. 1:3 with admixture of water proofing compound @ 1 Kg/ Bag of cement. |
| 7 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 8 | Scraping of Cement Plaster complete in all respect as per PWD specifications |
| 9 | 12.5 mm thick cement plaster 1:4. |
| 10 | 20mm thick cement plaster 1:4 in two coat work. |
| 11 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish |
| 12 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 13 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm (As per AC Slip No.1 to CSR 2020) |
| 14 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 15 | Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture. |
| 16 | Construction of Boundary Wall in Gap portionEarth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres. |
| 17 | Cement concrete 1:5:10 with 40 mm gauge stone ballast.using concrete mixer volumetric type (b) 40 mm guage. |
| 18 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. |
| 19 | 40 mm thick cement plaster D.P.C. 1:3 with admixture of water proofing compound @ 1 Kg/ Bag of cement. |
| 20 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 21 | 12.5 mm thick cement plaster 1:4. |
| 22 | 20mm thick cement plaster 1:4 in two coat work. |
| 23 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish |
| 24 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 25 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm (As per AC Slip No.1 to CSR 2020) |
| 26 | Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position. |
| 27 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 28 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 29 | Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender