Tender For Furnishing And Refurbishing Of Zonal Office (7066)

Sharing tender

Tender For Furnishing And Refurbishing Of Zonal Office (7066) A Partition Work. 1.0 2.0 Fully Height Partition (Semi Glazed) Providing And Fixing In Position Partly Glazed Full Partition Work As Per Drawing ,In Frame Work At 2X2 Grind (Horizontally And Vertically) Comprising Of 2X11 Hevy Gazed Almunium Section And/Or As Per Frame Work Shown In The Drawings With 9 Mm Plywood (Conforming Isi 710) On Both Sides Finished With 1 Mm Thick Laminates Of Approved Shade And Colour As Shown In Drawings. Item To Include 12 Mm Thick Glass With Chemical Eachingas Per Design And Fitted With 3-1/4 Thick Beach Wood Beading And 2X2 T.W. Member For Door Sides. All Exposed T.W / Beading Surfaces To Be Finished In Melamine Polish As Directed Including All Necessary Stainless Steel Finish Fittings/Hardware And Wood Preservative Paint Etc. As Per List Of Approved Material And As Approved By The Project Consultant/Bank Complete In All Respects. (Note: In Case Of False Ceiling, The Vertical Members To Be Fixed With Pucca Ceiling But The Area Of Partition Payable Will Be Below The False Ceiling Only) Low Height Partition (Semi Glazed) Providing And Fixing In Position Partly Glazed 4-0 Hт. Partition Work As Per Drawing,In Frame Work At 2X2 Grind (Horizontally And Vertically) Comprising Of 2X1 Hevy Gazed Almunium Section And/Or As Per Frame Work Shown In The Drawings With 9 Mm Plywood (Confermin Isi 710) On Both Sides Finished With 1 Mm Thick Laminates Of Approved Shade And Colour As Shown In Drawings. Item To Include 12 Mm Thick Glass With Chemical Eaching As Per Design And Fitted With 3-1/4 Thick Beach Wood Beading At Glass Sides All Exposed Wood. Surfaces To Be Finished In Melamine Polish Of As Directed Including All Necessary Stainless Steel Finish Fittings/Hardware And Wood Preservative Paint Etc. As Per List Of Approved Material And As Approved By The Project Consultant/Bank Complete In All Respects. 3.0 Full Glazed Partition (Between Running Table) Providing, Fitting & Fixing 12Mm Thick Flot Glass Partition .The Partiton Will Be Supported With S.S Patch Panel Fittings As Per Drawing And Design. The Exposed Edge Of The Glass Partition Should Be Polished To Super Quality. The Work Should Be Completed As Per Direction Of Architect Including Cost Of All Labour & Material. Etc.