Tender For Special Repair To Lt Cables, Over Head Power Distribution System And Allied Works In Div Hq & Cmp Area At Kalimpong Mil Stn Under Ge 867 Ews.
Tender Value
32.26 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
12 days left
EMD
64520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Lt Cables, Over Head Power Distribution System And Allied Works In Div Hq & Cmp Area At Kalimpong Mil Stn Under Ge 867 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of unserviceable/old ACSR conductors of any size from over head lines, poles by removing binding wire, service wire, cables and removal from site etc. complete all as specified and as directed. |
| 2 | Dismantling unserviceable cross arms, clamps etc. complete all as specified and as directed. |
| 3 | Dismantling insulator of any type, any size from LT poles etc. complete all as specified and as directed. |
| 4 | Excavation in trenches, not execeeding 1.5m wide and not exceeding 1.5m deep for foundation, laying of pipes, cables, wells, cesspits , manholes etc., n.exc 10 sqm on plan and getting out in soft/ loose soil, etc. complete all as specified and as directed. |
| 5 | Returning, filling in soil, including spreading leveling, watering and well ramming in laying not exceeding 25 cm thick, etc. complete all as specified and as directed. |
| 6 | Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exe 1.5 m above the starting point, etc. complete all as specified and as directed. |
| 7 | Supply and spread clean dry river sand in cable trenches as in cable cushioning etc. complete all as specified and as directed. |
| 8 | M&L for brick protection over cables inside the trenches by using common burnt clay bricks of best quality etc. complete all as specified and as directed. |
| 9 | Supply, laying, joining, connecting,testing & commissioning of XLPE LT cable insulated, screened, PVC bedded galvanised steel strips or wire armoured electric power cable (heavy duty) 1100 volts grade with standard aluminium conductor of cross sectional area of 35 sqmm 3.5 core etc. complete all as specified and as directed. NOTE : Excavation and Earth work shall be measured for separately) |
| 10 | Description all as per ser item No 9 here-in-before but size of LT under ground cable of 25 sqmm 4 core etc. complete all as specified and as directed. |
| 11 | Description all as per ser item No 9 here-in-before but size of LT under ground cable of 16 sqmm 4 core etc. complete all as specified and as directed. |
| 12 | Description all as per ser item No 9 here-in-before but size of LT under ground cable of 10 sqmm 4core etc. complete all as specified and as directed. |
| 13 | Description all as per ser item No 9 here-in-before but size of LT under ground cable of 10 sqmm 2core etc. complete all as specified and as directed. |
| 14 | S&F in repairs street light fitting of 70 Watt LED made of pressure die cast aluminium housing with toughned glass and LEDs with secondary optics and IP 66 protection and lens embedded PC Cover having top opening seperate driver compartment ,should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT≥5500, IP66, impact resistance IK 07, inbuilt protection against lightning, over voltage, short circuit and surge/ spike protection device upto 10 KV etc. complete all as specified and as directed. |
| 15 | S&F Street light bracket made out of GI tubing 25 mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of MS Flat with MS bolts, nuts and washer fixed to steel tubular pole/ PCC pole duly painted with two coats of aluminium paint complete including taking down u/s bracket any type etc. complete all as specified and as directed. |
| 16 | S&F Street light junction box of size 350 x250x150 mm made of high quality sheet moulding compound with IP-66 protection (Dust and vermin proof according to IEC-60529) Totally insulated with MCB, DP, 10kA, 6 Amps to be fixed on Din rail, with locking arrangement with cable gland suitable upto 16 sqmm cable and necessary fixing arrangements such as clamps, nuts, bolts etc. complete all as specified and as directed. |
| 17 | M&L for connection of junction box to street light luminaire using wiring with two runs (P-N) of single core 1.5 Sqmm (nominal area) FR PVC insulated and unsheathed multi-stranded copper conductor cable 1100 volts grade and one run of FR PVC insulated and unsheathed multi-stranded copper conductor of size 1.5sqmm single core as earth continuity wire drawn through PVC conduit(Heavy grade) and tiding the same by aluminium strip with the pole complete all as specified and directed. Note : Two single core 1.5 Sqmm cable and one single core 1.5 Sqmm earth conductor cable and one run of PVC conduit shall be measured as one run. |
| 18 | S&F in repairs Automatic street light timer panel three phase 8 KW ,415 volts comprising nature sensor for automic swithing \\"ON /OFF\\" of street lighting based on Lux level of nature light along with 32 Amps contractor, MCB 32 Amps with support terminals pre wired with PVC insulated 16 sqmm multi strand copper wire enclosed /hosed in pole wall mounted enclosure made of Thermoplastic polycorbonate, rust proof, termite proof & dust proof IP -66 etc. complete all as specified and as directed by Engr-in-Charge. |
| 19 | M&L for Manual boring under roads/hard standing by reqd T&P without disturbing the top surface of the road for throughing the cable in GI Pipe of 40 mm dia etc. complete all as specified and as directed. Note : GI Pipe shall be measured and paid separately. |
| 20 | M&L for GI pipe light grade 40mm bore dia with all fittings to be laid in trenches or in floors etc. complete all as specified and as directed. |
| 21 | M&L for GI pipe light grade 50mm bore dia with all fittings to be laid in trenches or in floors etc. complete all as specified and as directed. |
| 22 | M&L for cutting through exsisting bituminous road /PCC/floor aprrox size 10cm X 90 cm depth along the road for laying of GI tubing and makeing good the existing road as true surface etc. complete all as specified and as directed by Engr-in-Charge. |
| 23 | M&L for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground (Earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvanised iron strip 25 X 4 mm as earth lead by means of bolts nuts, check nuts and washers of brass and as shown in electrical plate No 3 connected to earth test point including necessary excavation any type of soil, RCC chamber cover plate, wire mess, funnel, test point, 40 mm dia GI pipe light grade for protection pipe and watering including taking down existing earthing of any type etc. complete all as specified and as directed. |
| 24 | Supply, installation, testing and commissioning of factory made powder coated (CPRI approved) outdoor type, dust & vermin proof busbar feeder pillar box made out of 3.15mm CRCA steel sheet of suitable size and angle iron 40mm x 40mm x 6mm , powder coated over one coat of red oxide primer, factory made duly fixed on the ground by PCC foundation (1:2:4) Type B-1 of size 300mm x300mm x600mm on the adjacent pairs of leg & net cementing the same.The feeder pillar box painted with two coats of epoxy based powder coated over a coat of red oxide primer (internally & externally) on the surface, complete all as specified and as directed. The feeder pillar box is cubicle shaped, roof canopy type, with special type of heavy duty industrial door hinges and totally enclosed dust proof and vermin proof front and back opening with locking arrangements etc. complete all as specified and as directed by Engr-in-Charge. The box should have provision/accommodation of the following electrical items:- INCOMING:(i) Rectangular Aluminium bus bar fixed on insulated mounting arrangement of rating 1.5 times current carrying capacity of incoming switch gear or not less than 200 Amp whichever higher provided with heat shrinkable sleeve not less than one mm thick. -04 Nos (ii) Indicator lamp for RYB phase (iii)Moulded case circuit breaker 80-100 Amps 415 Volts, Thermal Magnetic release with adjustable over load setting and adjustble short circuit setting,4 pole, ,Ics=100% Icu,25 kA breaking capacity.= 01 Nos. Make : L & T Cat Part No. CM91712OOKOOG or equivalent in Schneider/ ABB. |
| 25 | M&L for PCC (1:4:8), type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in mass concrete including necessary form work for coping to the Steel Poles etc. complete all as specified and as directed. |
| 26 | S&F PVC flat twin core unarmoured Aluminium cable of size 6.0 Sqmm etc. complete all as specified and as directed. |
| 27 | S&F PVC flat twin core unarmoured Aluminium cable of size 10 Sqmm etc. complete all as specified and as directed. |
| 28 | M&L for jointing heat shrinkable after removing faulty cable, straight through joints for PVC armoured heavy duty underground cable including joint kits complete for making joints suitable for aluminium Conductor cable 25 to 50 sqmm 3½ core 1100 volts grade and necessary testing after jointing etc. complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 29 | M&L for jointing heat shrinkable after removing faulty cable, straight through joints for PVC armoured heavy duty underground cable including joint kits complete for making joints suitable for aluminium Conductor cable 25 to 50 sqmm 3½ core 1100 volts grade and necessary testing after jointing etc. complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender