Tender For Proposed Interior/Furnishing Works Of Bank Of Baroda, Regional Office, Bhavnagar.

Sharing tender

Tender For Proposed Interior/Furnishing Works Of Bank Of Baroda, Regional Office, Bhavnagar. 1 Plain Gypsum False Ceiling (With Colour) As Per Design:- P & F Suspended False Ceiling As Per Design & Shape Suggested By Using Standard Company Sections [Gyp-Steel R], Which Includes P & F G. I. Perimeter Channels Of Size 0.55Mm Th. Having One Flange Of 20Mm & Another Flange Of With Nylon Aleeves & Screws At 610Mm C/C. Then Suspending G. I. Intermediate Channels Of Size 45Mm, 0.9Mm Th. With Two Flangs Of 15 Mm Each From The Soffits At 1220 Mm C/C With Ceiling Angle Of Width 25Mm X 10 Mm X 0.55Mm Th. Fixed To Soffits With G. I. Cleats & Steel Expansion Fasteners. Ceiling Sections Of 0.55Mm Thickness Having Knurled Web Of 51.5Mm & Two Flangs Of 26Mm. Each With Lips Of 10.5Mm Area Then Fixed To The Main Intermediate Channel With The Help Of Connecting Clips & In Direction Perpendicular To The Intermediate Channel At 457 Mm C/C. 12.5 Mm Th. Tapered Edge Gypsum Board (Confirming To I.S.-2095-1982) Is Then Screw Fixed To Ceiling Section With 25Mm Drywall Screws At 230 Mm C/C. Screws Fixing Is Done Mechanically Either With Screwdriver Or Drilling Machine With Suitable Attachment. Sq.Ft 285 Standard Company Manufactured Sections [Gypsteel R] Should Be Used For The Entire Framework. Finally The Board Are To Be Joined & Finished So As To Have A Finish Look Which Includes Filling & Finishing The Tapered & Squarev Edges Of The Boards With Joining Compound, Paper Tape & Two Coats Of Primer Suitable For Gypsum Board (As Per Recommended Practices Of India Gypsum Or Equivalent). General Notes For The Above Item Rate Includes: The Job Includes Applying Two Or More Coats Of Acrylic Emulsion Paint In The Standard Procedure Of Painting Job. The Cut-Outs For Variety Of Light Fixtures, A.C. Continuos Grills & Diffusers, Music Speakers & Other EquipmentS Etc. & The Same Have To Be Made With The Frame Of Perimeter Channels Of Size: 20Mm X 27Mm X 30Mm X 0.55Mm Thick, Supported Suitably. No Extra Will Be Paid For This. The Visible Area Will Be Considered For The Measurement Purpose. Overlapping & Visible Vertical Drops Of The Boards Will Not Be Cosider For Measurement Purpose. The Trap Door Made Out Of 19Mm Plywood With Proper Teak Wood Frame Fixed To The Structural Ceiling & All Required Hardware Such As Hinges, Locks, Stoppers, Handles Etc Comp. In Plastic Emulsion Paint Finishes Surrounding Ceiling Finish. [2 Nos.] Angle Bead Has To Be Used To At Steps To Get Straight Line. Edges Bead Has To Be Used To Protect The Exposed Gypsum Core I.E. Cut Edges Of Opening For Light Fixtures, A.C. Grills, Diffusers, Speakers Etc. V Grooves Should Becut At Every Square Edge Joints/Filled With Joining Compound & Paper Tape. 2 False Ceiling (Armstrong):- Providing And Fixing In Position False Ceiling In Armstrong 600 X 600 X 15/16 Mm Dune Supreme Rh 99 Prima Tile With Tegular Edge Framework With Microlok As Specified By Armstrong Co. With Suspenders Wherever Required. Making Necessary Framework For A.C. Ducting, If Any And Necessary Cutouts For Diffusers And Light Fittings, Taping And Finishing To Proper Line & Level, Including Making Grooves And Trap Doors For A.C. Unit In 18 Mm Thick M.R. Grade Plywood With Stainless Steel Hinges & Locks With Moulding 1 X 1 For Edges Including Finishing With White Plastic Emulsion Paint Etc. Complete In All Respects. (Note: Only Number Of Tiles Will Be Measured For Payment. No Extra Payment Will Be, Made For Cutouts, Grooves, Mouldings, 2X2 Lighting Etc,). Sq.Ft 190 3 Laminated Panelling :- Providing And Laying Pannelling On Walls & Pillers Having 12Mm Th Commericla Plywood Of Approved Make And 1.0Mm Th Laminate Fixed On Wall & Pillers With Aluminium Framing Of 25Mm X 25 Mm X 1.20 Mm Thick At Maximum 2-0 C/C Bothways Or 18 Mm Thick Plywood With Laminate Panelling On Wall And Piller And Creating Box Above Main Door And Fixed Glass Partition Etc Complete As Directed. Pannelling As Per Design And Instruction Of Architect. Sq.Ft 55 4 Partly Glazed Full / Low Height Partition:- Providing And Fixing Both Sides Laminate Full Height Partly Glazed Partition Using 50Mm X 25Mm X 1.50Mm Thick Aluminium Members In A Maximum Grid Of 600Mm X 600Mm Fixing 12 Mm Thick Plywood Board On Both Sides With 1.0 Mm Laminate Of Approved Make Shall Be Fixed On Plywood. Providing And Fixing 5.0/8.0/12 Mm Thick Float Glass As Directed In The Partition. Providing And Fixing Door Shutter Using 32 Mm Thick Flush Shutter Both Side Laminated And Fixing 6.0/8.0 Mm Thick Glass With Beading Patti, 5 Long 3 Nos Stainless Steel Hinges, Doorstop Shall Be Provided As Directed. Godrej Mortice Lock Shall Be Provided In Door Shutter. All Visible Members If Not Laminated Shall Have Lacquer Polished As Directed. The Partition Shall Be Secured By Fixing & Extending The Vertical Members Of The Frame At Critical Points Upto The Bottom Of The Rcc Slab Or Sides/Bottom Of Rcc Beams & Bottom Horizontal Member Of Frame Shall Be Secured & Fixed With The Flooring As Directed. For Purpose Of Payment Partition Height Up To Bottom Of False Ceilling Only Shall Be Measured And Paid . No Extra Payment Shall Be Made For Members Going Up To Slab/Beam Bottom. Sq.Ft 315 5 Pantry Platform Shutters:- Providing And Fixing Loft Shutters / Pantry Platform Shutter To Be Made Out Of 2X1 Teak Wood Frame, 18Mm Thk. Com. Ply, T.W. Beading Finished With Melamine Polish , Both Side 1 Mm Thk. Approved Laminate Incl. All Necessary Hardware Fittings And Locking System As Suggested Area. As Per List Of Approved Material, Instruction And Design Of Architect / Bank Including All Labour And Materials. Sq.Ft 20 6 Roller Blinds :- Install Sunscreen Roller Blind With Same Fabric Palment Of Vista Brand As Per Specification, Approved Fabric Sample From The Architect With Printing On Fabric As Per Bank Selected Graphics. Measurement Will Be Taken As Per Actualsize Of Window On Site, There Are No Any Other Measurement Will Consider Over Window Size. Etc.