Tender For Alopibagh Flyover Rgbw Facade Lighting Including Complete Operation And Maintenance For 5 Years
Tender Value
5.15 Crore
Estimated cost
Bid Submission
05 Nov 2026
6 days left
EMD
10.32 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Alopibagh Flyover Rgbw Facade Lighting Including Complete Operation And Maintenance For 5 Years
BOQ
| Sl. No. | Item Description |
| 1 | Supplying Installation, Testing and Commissioning of LED RGB/RGBWW/RGBNW/ RGBA/ RGBW (as per site requirement) Linear Profile / Wall Washer luminaire for Facade lighting with aluminium extruded/ Die Cast housing with inbuilt driver of following wattage as given below. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°, having the rotation degrees scale shall be provided. The luminaire shall be IP66 protection also having silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. CRI>80, SDCM<5, THD<10%. as per IEC 61000-3-2, under voltage, over voltage protection, driver inbuilt surge protection of 4KV and external surge protection (SPD) of 10 KV common mode/differential mode, Driver Efficiency>85%, EMI/EMC as per CISPR-15. There should be options of beam angles of 10/20/30/40/60, asymmetric degree. Luminaire should have efficacy of minimum 40 lm/W for RGB/ RGBNW/ RGBWW/TNW and 65 lm/W for mono colour options. Luminaire shall be capable of producing dynamic colour changing light for with 16 million colours by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with replaceable driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9. Fixture shall be suitable to operate at an ambient temperature range of - -10°C to +50°C and shall have impact resistance of IK 07. Lifetime of complete luminaire (LED ,Driver , Electrical & control 98DELHISCHEDULEOFRATES(E&M)-2025circuitry) shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) with dully R Number marked and shall be complete with all necessary accessories required for proper working of fixture including connection/inter connection with weather proof ISI Marked copper conductor of minimum size 1.5sqmm connection cables and accessories , Integral male/female water proof connectors of IP68 etc. as required. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer, Rohs Compliance. 25 Watt |
| 2 | Same as Above 40 Watt |
| 3 | Supplying Installation, Testing and Commissioning of Circular/ Rectangular/square LED RGB/ RGBWW/ RGBNW/RGBA/RGBW (as per site requirement) Facade Floodlight/ Projector luminaire for facade lighting with Pressure Die-cast aluminium housing, powder-coated finish, with inbuilt driver of following wattage as given below. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°, the scale shall be provided for rotation degrees. The luminaire shall be IP66 protection also having silicon gasket between optical cover & LED chamber to ensure proper IP66 protection and impact resistance of IK 07. CRI>80, SDCM<5, THD<10%. as per IEC 61000-3-2, under voltage, over voltage protection, driver inbuilt surge protection of 4KV and external surge protection (SPD) of 10 KV common mode/differential mode, Driver Efficiency>85%, EMI/EMC as per CISPR-15. There should be options of beam angles of 5/10/15/20/25/30/40/45/60 degree. Luminaire should have efficacy of minimum 35 lm/W for RGB/RGBNW/RGBWW/TNW and 65 lm/W for mono colour options. Luminaire shall be capable of producing dynamic colour changing light for with 16 million colours by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with replaceable driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9. Fixture shall be suitable to operate at an ambient temperature range of -10°C to +50°C. Lifetime of complete luminaire(LED ,Driver , Electrical & control circuitry) shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS: (IS 10322) with dully R Number marked and shall be complete with all necessary accessories required for proper working of fixture including connection/inter connection with weather proof ISI Marked copper conductor of minimum size 1.5sqmm connection cables and accessories, Integral male/female water proof connectors IP 68 etc. as required.The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer, RoHS Compliance. 40 Watt Same as Above |
| 4 | Same as Above 60 Watt |
| 5 | Same as Above 100 Watt |
| 6 | Supplying Installation, Testing and Commissioning of DMX Controller for the system including address writer and programming the DMX controller with the suitable designs as decided by the Engineer-in-charge/client department (not less than 10 nos designs) and all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/tablet /computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & Ethernet. Dmx controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. It's must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presents and also have provision of keypad on device for changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating Temperature of 0°C to 50°C.OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10/11. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad /Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta clamp to mount on wall with data enablers and splitters as required. To be provided with IP 66 enclosure if installed in external environment. |
| 7 | Supplying Installation, Testing and Commissioning of Signal Amplifier to boost the Signal, IP 65 rated module to enhance the depleting DMX Signals, should have IP 66/67 rates inbuilt connectors compatible with Luminaires. It should be offered with inbuilt electronic circuit for functioning. No external LED driver needed etc., complete as required |
| 8 | Supplying Installation, Testing and Commissioning of RDM-6Wall Splitter, should be able to provide 6-output DMX/RDM splitter with DMX/RDM pass-through supporting bi-directional communications for discovery, addressing and DMX control of Ethernet/DMX products. This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6x32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Surface or DIN-rail mountable, Isolated DMX/RDM Input/Outputs, Automatic switching between DMX and RDM mode for auto-discovery, Environment-IP20, Interior applications, Finish/Color-Polycarbonate, Certification: CE Certified. DMX Splitter/Booster etc. as required. |
| 9 | S/F of DP Structure of 410 SP/55 11 M. long Pole STP in 1:3:6 CC foundation wioth 3 with 3 No. M long 100 mm x 50 mm x 5 mm and 2 No. 2 M. long 75 mm x 40 mm x 5 mm MS Channel, 2 No. 2.5 M. long 50 mm x 50 mm x 5 mm Angle Iron Braching and 14 No. 38 mm x 6mm D Clamp with necessary Packing Pieces complete with 100 KVA 11/0.433 KV, Level-2 BIS Standard, as per present UPPCL's Specifications & approved make including Pole mounted Transformer 11 KV TPMO & Fuse Set, earthing etc, Rate excluding deducting Plinth & LT MCB Box. |
| 10 | S/L of Aluminiuum conductor PVC Insulated armoured served sheathed Same as Above but size 120 Sq mm x 3.5 Core 1100 volts grade at a deopth of 750mm below groundlevel over a cushion of 756 mm. Thick sand all around and protectedwith burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable sie or as directed by the E/I, complete |
| 11 | S/F of 120 Sq mm cable Lugs |
| 12 | Same as above 90 mm dia (OD-90 mm & ID-76 mm nominal) 6 Kg ISI marked alongwith all accessories |
| 13 | SITC of 3.5C x 35sq mm Aluminium Armored cable with termination and glanding.etc complete. |
| 14 | SITC of 4C x 16sq mm Aluminium Armored cable with termination and glanding.etc complete. |
| 15 | SITC of 4c x 10 sq mm Aluminium Armored cable with termination and glanding etc complete. |
| 16 | SITC of 3C x 4 sq mm Copper flexible cable with termination and glanding etc complete. |
| 17 | SITC of 3C x 2.5 sq mm Copper Flexible cable with termination and glanding etc complete. |
| 18 | SITC of 5C x 2.5 sq mm Copper flexible cable with termination and glanding etc complete |
| 19 | SITC of 25 mm flexible conduit etc complete |
| 20 | SITC of 25 mm PVC conduit etc complete |
| 21 | SITC of of CAT-6 cable with termination etc complete. |
| 22 | Ssupply, installation, testing and commissioning of the panel totally insulated & enclosed floor/wall mounting cubicle type feeder piller (Ip 65) with following properites uv/fire/acid chemical resistant/anti corrosive/dust/water/weather/shock proof (1p65/66) in accordance with iec 61439-1 clause 10.2.4. Incoming cable entry from bottom/left/right side of panel & outgoing cables entry from bottom/left/right sides of panel as per detail design and cable entry and outgoing are only with suitable sizes of screw less glands. including with all accessories copper bus bar, din rails, earth links, neutral links, glands, locks, connectors. thimbles, connecters etc.complete with all respects. Incomer 100a 3pole mccb, high/low voltage cut off relay, neutral failure protection relay, astronomical timer with 100a contactor, 100a byepass switch, ryb led indicators, volts/amp digital meters-1-set & outgoing: 3pole 20a 14 nossupply, installation, testing and commissioning of copper wounded natural oil cooled servo voltage stabilizer,type-linear rolling contact, oil cooled, outdoor canopy, with following ratings, 3-phase, 50hz, efficiency > 95%, unbalanced input voltage and unbalanced load, volt/ampere meter ct's, bye pass switch, input voltage range 300v-460v, output voltage range phase to phase 400v and phase to neutral 230v adjustable. Microprocessor controlled, ultra fast response 10 milliseconds, fabricated out of crca sheet, powder coated, treated with all anti-corrosive process before naintine 30 KVA |
| 23 | Supply & laying of following 50 mm dia (OD-50 mm nominal) DWC HDPE pipe 6 Kg ISI marked alongwith all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Ii complete with fitting and cutting. Jointing etc, direct in groudn (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. copete as required. |
| 24 | ITC of junction box (450 mm x 350 mm x 120 mm) along with MCB and other required accessories, if any etc complete |
| 25 | S/E with G.I. Earthing pipe 4.5meter long,40mm dia including accessories and providing masonry enclosure with over plate haing locking arrangement and watering pipe etc with charcoal/ake and salt a per SOR-18 |
| 26 | S/F of factory fabricated and wired metal Glande dust & vermin proof floor mounting distribution TPN feeder pillar with incoming 400 Am. 1 Nos MCCB and outgoing 200 Amp 2 Nos. = 63 Amp 1 Nos cubical type with requiredd busbar as IS 8623 with Insulated Heat Shrink sleeving and mouting on non Hygrscotic suport as CMC/BMC. With 3 No indicator, The Pillar should be fabricatedwith CRCA sheet 2 mm thick Paintedwith High quality Pint with locking arrangement complete with cable Gland complete. |
| 27 | SITC of junction box (100 mm x 200 mm x 100 mm) etc complete. |
| 28 | SITC of junction box (600 mm x 300 mm x 170 mm) along with MCB and other required accessories, if any etc complete |
| 29 | Software Programming for Bridge Façade Lighting |
| 30 | 1st Year only Operation @ 1% on part(A) |
| 31 | 2st Year only Operation & Maintenance with all materials and Comprehensive @ 2.0% on part(A) |
| 32 | 3nd Year only Operation & Maintenance with all materials and Comprehensive @ 3.25% on part(A) |
| 33 | 4rd Year only Operation & Maintenance with all materials and Comprehensive @ 4.0% on part(A) |
| 34 | 5th Year only Operation & Maintenance with all materials and Comprehensive @ 4.25% on part(A) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender