Tender for Tender for Machhlishahar-Gram Sabha In Nikamuddinpur (Patel Basti From Ramkumar Patels Rice Mill, Kannojiya Basti Is Hote) Gram Sabha In Pahadpur Muslim Basti (Urdu Primary School Tak Sampark Marg On The Front Side Of The Road Built By Dis
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Oct 2026
3 days left
EMD
87500
Bank guarantee accepted
Document Fee
3650
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaunpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Machhlishahar-Gram Sabha In Nikamuddinpur (Patel Basti From Ramkumar Patels Rice Mill, Kannojiya Basti Is Hote) Gram Sabha In Pahadpur Muslim Basti (Urdu Primary School Tak Sampark Marg On The Front Side Of The Road Built By District Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 |
| 2 | Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with 3-wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density. G-2 as per technical specification clause 405 |
| 3 | Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with 3-wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density. G-3 as per technical specification clause 405. |
| 4 | Construction of unreinforced, plain cement Concreet Pavment, thikcness 15cm, overa prepared sub base, with43 grade cemment or any other typeas per M30 coarse and fine aggregates conforming to IS:383, the maximum size of coarse aggregates not exceeding 25mm, ixed in a concrete mixer of not less than 0..2cum capacity and appropriate weigh batcher using approved mixed design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 mmicron thick polythene film, wedges, steel platesincluding levelling the formwork as pper drawing),,spreading the concrete with shovels, raes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joint, curing of concrete slab for 14 days using curing comppound(where specified) and water finishing lines and grade as per drawings and Technical Specification Clause 1501 |
| 5 | Providing and applying primer coat with bitumen emulsion(SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical means 502 |
| 6 | Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.35 kg per sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per technical specicification Clause 503. |
| 7 | Providing & laying 20mm thick P.C. over existing WBM surface and including p/l of Prime Coat @ 0.75Kg./Sqm & Tack Coat @ 0.35Kg./Sqm by bitumen emlusion, With graded approved quarry grit (0.018Cum 13.2mm nominal size and 0.009cum 11.2mm nominal size grit and as per P.W.D. specification as per direction of E/I. |
| 8 | Cleaning the Premix surface and laying Seal Coat of graded 2.36mm nominal size approved quarry grit @ 0.006cum per Sqm with 80/100 bitumen @ 0.68Kg./Sqm including heating the bitumen to required temp. including cost of grit, labour, T&P for proper completion of work. As per P.W.D. specification & as per direction of E/I. |
| 9 | Providing and laying of applied thermoplastic compound 2.5 mm thick 10 cm wide |
| 10 | H.P Np3 |
| 11 | S/F of Sign Board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender