Tender For Renovation Of Room No. 360 At Mla Hostel, Nagpur
Tender Value
16.83 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
1 days left
EMD
17000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Room No. 360 At Mla Hostel, Nagpur
BOQ
| Sl. No. | Item Description |
| 1 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 2 | Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete |
| 3 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete. |
| 4 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 5 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 6 | Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 7 | Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete. |
| 8 | Providing and laying wearing laminate wooden or equivalent flooring 8 mm thick of superior superior wooden floor is to be instal as shooting for and must be late on underlay with proper distance from wooden flooring uniquely install point 5 mm polythene laminate sheet to absorb moisture from bottom surface of floor there is no need to install attachment the plank the wooden flooring underlay from is alkaline resistance density 33 kg square metre with excellent property for very long lifetime HDFC materials original floor should glue together at and Poonam Glu imported from per stop flooring etc |
| 9 | Providing and fixing Full height 3.5 to 4 mm thick veneer finish partition at made out of 63 x 38 mm thick Aluminium Pipe frame work of size 600 x 600 mm center to center or as per site condition covered by 12mm thick marine plywood of the reqisite manufacture viz. Anchor/Century/ Kenwood/Durojet or equivalent generally confirming to I.S.710-1980 finished with 3.5 to 4 mm thick matching Greenply Veneer (Wood Crrests) of approved colour kenwood stain wall nut grooves and in matching veneer pattern and design Including melamine polishing etc. complete as per approved drawings and as directed by Engineer-in-charge. (Excluding All Taxes) |
| 10 | Providing and laying laminate wooden reducer strip soft superior 5 mm fix between wooden flooring and ceramic tile for any kind of chlorine Kisi complete as approve by engineer in charge |
| 11 | Providing and fixing decorative wallpaper Super quality including adhesive to fix at all including transportation etc complete. |
| 12 | Providing and fixing Wall Mounted European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 13 | Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. |
| 14 | Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. |
| 15 | Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, with pillar cock, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge. |
| 16 | Supply and installation of double bed (king size) made up of inner teak wood frame and outer visible part in HDHMR acrylic and inner part 18 mm HDHMR white matt colour, head board cushing with foam and fabric as per approved design and colour. Approximate size ofbed:L84\\" x W 78\\" x H 14\\" |
| 17 | Providing and Fixing Upholstered Convertible Sofa Cum Bed, Convertible into Double Bed, of approved design and size, comprising of sturdy plywood/MS structural frame, high-density PU foam cushioning, good quality upholstery/furnishing fabric, back and seat cushions, folding/conversion mechanism, heavy-duty, brackets,Channels castors/rollers, screws, fasteners and all necessary hardware, fittings, accessories and labour, complete in all respects as directed by Engineer-in-Charge |
| 18 | SUPPLY & INSTALLATION OF T.V CABINET MADE IN 18MM HDHMR BODY WITH IMM HIGH GLOSS FINISH LAMINATE PASETED WITH JOWARTH MAKE IN GARMAN BRAND GLUE ALONG WITH ALL SIDE 1.5MM PVC EDGE BAND. ONE DRAWER ALONG WITH TELESCHOPIC CHANEL & FOUR SIDE OPENABLE DOOR ALONG WITH HING IN HETTICH BRAND. WITH ONE UPPER BACK PANEL & OPEN CABINET WITH INTERNAL MATCHING & ONE TALL CABINET WITH 4 SHELF & MATCHING FLUTED PANEL WITH 1 MM HIGH GLOSS LAMINATED FIXING WITH MINIFIX, L-PATTI, SCREW...ETC.(SIZE:-W-2700×D-450×H-2770) |
| 19 | Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). |
| 20 | Providing and fixing factory made uPVC twin sash casement glazed window and door(White Colour) comprising of two shutters, one outward opening having glass and oneinward opening having SS Mesh and integrated grill provision between two shutters.uPVC multi-chambered frame, sash, bugmesh sash and mullion (where ever required)extruded profiles with wall thickness of 2.3mm (+-0.2 mm) duly reinforced with G.Isection 1.50 wherever required. uPVC window & door profile shall be made in India &shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name ofthe test Test Method Specified Parameter1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 VicatSoftening Temperature EN ISO – 306 Shall not be < 750C3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m24 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm25 Mean Breaking Stress for welded corner(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm26 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %7 Surface Spread of flame BS : 476 - Part 7 Classification 18 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable9 Tensile modulus ASTM D 638 Shall not be < 35 MPa10 Shear Modulus ASTM D 732 Shall not be < 220 MPa11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sashwill be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall beprovided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm FloatAnnealed glass shall be provided in the sash with the help of uPVC glazing bead andhardware, i.e., friction hinge & single point handle (in window) & 3D Hinges &Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wallwith 100mm long and 8mm dia. Fasteners and complete in all respect as per direction ofEngineer-In-Charge.uPVC Window and Door Profiles are warranted for a period of ten (10) years against non (b.Twin Sash Casement Door frame of size 122 x 62 mm, door sash 67 x 115 mm & bugmesh sash of 42 x 84 mm.) |
| 21 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 22 | Providing and Fixing 18mm 0.5 density Decorative /Luxurious WPS Sheet on Wooden Bottom (Size 50mmx25mm)Fixed in Heavy glazed Saipro rectangular aluminium pipe of weight 295 per kg at spacing 600mmx600mm grid pattern etc. Completed as per directed by Engineer in -Charge.(Excluding all Taxes) |
| 23 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall |
| 24 | Providing and fixing C.P. sink cock with raised J\\" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete.\\" |
| 25 | Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc.complete. |
| 26 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. |
| 27 | Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. |
| 28 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. |
| 29 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 30 | Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. |
| 31 | Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) |
| 32 | Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. |
| 33 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 34 | Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 35 | Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) |
| 36 | Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. |
| 37 | Providing & Fixing 25mm thick white/Black PVC Sheet with glossy surface ect.complete as per directed by engineer-in-charge. (Excluding All Taxes) |
| 38 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. |
| 39 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. |
| 40 | Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the generally confiriming to I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge. |
| 41 | Providing And Fixing 0.60 m deep Cupboard type Storage Unit made out of 19mm thick marine plywood of the requisite manufacture i.e.Anchor/Century/Kenwood/Greenply or equivalent generally confirming to I.S. 710-1980 for frames, internal verticals horizontal divisions, shutters and 9mm & 12mm thick marine plywood for drawers with necessary locks, handles, hardware, lipping & beading patti (BTC) etc. The total shall be finished with outside 3.5 to 4mm Greenply Veneer (Wood Crrests )sheet Including Melamine Polish & inside Formica Laminate Sheet (Royale touche) of 0.80 mm as per approved with grooves etc. complete as per approved drawings and as directed by Engineer-in-charge. (Excluding All Taxes) |
| 42 | Providing and fixing of factory made uPVC casement window / Fixed Window &Casement Door (White Colour) comprising uPVC multi-chambered frame, Sash, &Mullion with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with G.I. section 1.5mm, wherever required. uPVC window & door profile shall be made in India & shallconform to BS EN 12608 and other standards as mentioned below: S.No. Name of thetest Test Method Specified Parameter1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 VicatSoftening Temperature EN ISO – 306 Shall not be < 750C3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m24 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm25 Mean Breaking Stress for welded corner(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm26 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %7 Surface Spread of flame BS : 476 - Part 7 Classification 18 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable9 Tensile modulus ASTM D 638 Shall not be < 35 MPa10 Shear Modulus ASTM D 732 Shall not be < 220 MPa11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sashwill be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall beprovided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm FloatAnnealed glass shall be provided in the sash with the help of uPVC glazing bead andhardware, i.e., friction hinge & single point handle (in window) & 3D Hinges &Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wallwith 100mm long and 8mm dia. Fasteners and complete in all respect as per direction ofEngineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten(10) years against non-uniform discoloration, wrapping and rotting under general use (a. Casement Window (Big Series) frame of size 67 x 62 mm & Sash / Mullion of size 67 x78 mm) |
| 43 | Bed Side Table @ 400LX 400DX 415H Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding |
| 44 | Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. |
| 45 | Providing and fixing Luxurious Elegant Finished laminate wall paneling made out of 50 x 25 mm thick Aluminium Pipe frame work of size 600 x 600 mm center to center or as per site condition covered by 6mm thick marine plywood of the requisite manufacture viz. Anchor/Century/ Kenwood/Durojet equivalant generally confirming to I.S. 710-1980 finished with 1.5 mm thick laminate sheet (Royale touche) of approved colour and in pattern and design with antitermite treatment to all plywood and woodwork etc. complete as per approved drawings and as directed by Engineer-in-charge. (Excluding All Taxes){ Rate Approved Vide Letter No. 10332/Sr. No.27 Dt. 23/10/2024 by S.E.Nagpur.} |
| 46 | SUPPLY AND INSTALLATION OF BASE STORAGE MADE IN 18MM HDHMR WITH IMM HIGH GLOSS LAMINATED PASTED WITH JOWARTH MAKE IN GARMAN BRAND GLUE ALONG WITH 1.5MM EDGE BAND FIXING WITH MINIFIX, SOFT CLOSING HING, SCREW, METAL SHELF SUPPORT...ETC., |
| 47 | Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). |
| 48 | Cnc cutting ms jail 4mm thick with powder coating |
| 49 | Supply of memory foam mattress pixel 7\\" with 120 density rebonded with copper 3d 2 memory foam as pillow top and rebonded with proper foam on both side with 7 year warrantee. Approximate size of bed:-L84\\" x W 78\\" x 17\\" |
| 50 | Tea Table 900mm X 750mm X 450mm for m.s. ante chamberProviding And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. |
| 51 | Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery |
| 52 | C.P.soap dish (polyurethane) jaquar make continental (Cat. No. AQN 7733 ) |
| 53 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 54 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 55 | Supplying Bed Side Runner Carpet |
| 56 | Supply of orthomery foam pillow:3 Supply of orthomery foam pillow of size 23\\" x 15\\" comfertable and long duration |
| 57 | Carrying out testing of cement including necessary material & testing charges etc. complete. Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. |
| 58 | Carrying out testing of Sand including necessary material & testing charges etc. complete. Fineness Modulus. |
| 59 | Carrying out testing of Vitrified/Ceramic Tiles Tiles including necessary material & testing charges etc. complete. i) Transverse Strength. ii) Water absorption (set of 6 Tiles) |
| 60 | Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction material for which royalty is necessary.a. For Sand Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender