Tender For Special Repair To Md Accn Of D Block Qtr D-233 234 235 237 239 & 240 Of 21 Bihar Under Ge Narangi
Tender Value
44.60 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
14 days left
EMD
89200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Md Accn Of D Block Qtr D-233 234 235 237 239 & 240 Of 21 Bihar Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed. |
| 2 | Material and labour for non skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm as in floors set and jointed in cement slurry and pointed in white cement mixed with colour pigment to match existing surfaces with 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 3 | Material and labour for glazed light coloured/printed ceramic tiles 450x300x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 4 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 5 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over 15mm thick rendering in cement mortar (1:6) complete all as specified and directed. |
| 6 | Dismantling of stone slabs and tiles of andy description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 7 | Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including and over 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 8 | Material and labour for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including and over 10 mm thick screed as packing coat in cement mortar (1:4) complete all as specified and directed. |
| 9 | Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including and over 20 mm thick screed in cement mortar (1:4) complete all as specified and directed. |
| 10 | Material and labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 10 mm thick screed as packing coat in cement mortar (1:4) complete all as specified and directed. |
| 11 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed. |
| 12 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed. |
| 13 | Supply and fix Pressed steel frames for doors of size 125mmx60mmx1.25mm with double rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed. |
| 14 | Supply and fix Pressed steel frames for doors of size 105mmx60mmx1.25mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed. |
| 15 | Supply and fix powder coated three track aluminium sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete including 4.00 mm thick tinted glass panes, rubber beading, mosquito proofing, locking system etc. complete all as specified and as directed. (Refer Hindalco Cat M-2014 ) Aluminium sections : 'A' series (i) Shutter bottom & top :- 37.50 x 15 x 1.50 mm thick (20690) (ii) Shutter interlock :- 37.50 x 23 x 1.50 mm thick (20689) (iii) Shutter side (Handle) :- 37.50 x 23 x 1.50 mm thick (20689) (iv) Frame bottom :- 91.8 x 31.75 x 1.2 mm thick (4309) (v) Frame top and sides :- 91.8 x 31.75 x 1.2 mm thick (4310) |
| 16 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, locking system all complete all as specified and directed. |
| 17 | Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 18 | Supply and fix factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specfication, drawing and complete all as specified and as directed. |
| 19 | Supply and fix factory made 35mm thick plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 20 | Supply and fix 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed. |
| 21 | Material and labour for 18-19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative lamination on both faces fixed with screws/nails to timber frame work complete all as specified and directed. |
| 22 | Material and labour 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area not exceeding 3 sqcm complete all as specified and directed. |
| 23 | Material and labour 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exceeding 13 sqcm but n exc 25 Sqcm all as specified and directed. |
| 24 | Supply and fix 100 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 25 | Supply and fix 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 26 | Supply and fix 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 27 | Supply and fix 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 28 | Supply and fix 100 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 29 | Supply and fix aluminium Wardrobe hooks (single) 50mm to 60mm complete all as specified and directed. |
| 30 | S&F in repairs 25 mm dia stainless steel tublar curtain rods including fancy type with fixing brackets, stops, rollers,side dome, decorated s/s end knob etc. with bracket including stainless steel decorative side knob etc complete all as specified and as directed. |
| 31 | Supply and fix floor door stopper of aluminium alloy body and tongue, overall length of cover plate 100 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 32 | Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed. |
| 33 | Supply and fix continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flap when open fixed to wooden frame or shutter any type with screw complete all as specified an directed. |
| 34 | Material and labour for 100 mm long hasp and staple, safety type, aluminium anodised with MS hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 35 | Supply and fix stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed. |
| 36 | Supply and fix 4 mm thick figured glass pin head type and glazing with oil putty/wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed. |
| 37 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as specified and as directed. |
| 38 | Demolition of concrete exc 15 cm thickness as in sunken floor and also removing the debris to the out side of MD land complete all as specified and drected. |
| 39 | Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 40 | Material and labour for RCC (1:1.5:3) nominal mix type A1 ( using 20 mm aggregate stone aggregate) on slabs supported on walls , beams and columns in floors , roofs,landings,balconies, canopies deck slabs and in shelves and the likew complete all as specified and drected. |
| 41 | Material and labour for plain cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling in pressed steel door and window frame or fixing the hols fast etc complete all as specified and as directed. |
| 42 | Material and labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregated) as in padding of roof top finishing even and fair to ascertain the proper slope with using WPC as per manufacturer instruction complete all as specified and as directed. |
| 43 | Material and labour for 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in sub base the surfaces even and rough complete all as specified and directed. |
| 44 | Material and labour for 75 mm thick, PCC (1:3:6), type C1 (using 20 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade 'A' etc complete all as specified and as direted. |
| 45 | M/L for 100 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate in floor etc complete all as specified and directed. |
| 46 | Material and labour for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in filling of sunken floors complete all as specified and directed. |
| 47 | Material and labour for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:-(i) Taking out old roof treatment of any and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish not exceeding 100 mtr distance from starting point. (ii) Screed bed or bedding layer of mortar 15 mm thick in CM (1:4) with mixing of WPC and surface finished fare and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986.(iv) Applying of Hot blown grade bitumen 85/25, @ 1.20 Kg/Sqm (v) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above over by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (vi) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. |
| 48 | Material and labour for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM (1:4) mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM (1:4) mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC (1:3:6) all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely) |
| 49 | Material and labour for form work on flat sides to soffits of suspended roof slabs not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete all as specified and as directed. |
| 50 | Material and labour Formwork to edges of roughed finished surface of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but n.exc 20cm wide all as specified and as directed. |
| 51 | Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed. |
| 52 | Supply and fix mild steel Framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 53 | Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 54 | Supply and fix GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete all as specified and directed. |
| 55 | Taking up or down GI tubing 20 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 56 | Supply and fix 20 mm bore galvanised iron tubing medium grade including all fittings in walls/ceilings or laid in floors including cutting complete all as specified and directed. |
| 57 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed. |
| 58 | M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top,hoisted and fixed in Position all as specified in MES Schedule including dismantling/ lowering down unserviceable Water Storage Tanks, complete all as specified and as directed. |
| 59 | S & F in repairs 20 mm dia brass Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 60 | Supply and fix in repair chromium plated long body fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed. |
| 61 | Supply and fix in repairs chromium plated wall mixer three in one system for mixing hot & cold water with hand shower screwed down for iron pipe and fixed complete all as specified and as directed. |
| 62 | Supply and fix in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 63 | Supply and fix in repair stop valves/angle cocks, cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and directed. |
| 64 | Supply and fix in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed. |
| 65 | Supply and fix in repair stainless steel sink single bowl made of 1mm thick stainless steel sheet for kitchen with plugs, washers, waste coupling and pipe, cast iron cantilever brackets and connecting union to pipe overall size 510 X 430 mm bowl size 430mm x 380mm x 203 mm complete all as specified and directed. |
| 66 | Supply and fix in repair stainless steel kitchen rack made of 0.85 mm thick stainless steel sheet of size 610 mm x 760 mm x 254 mm fixed to wall with screws complete all as specified and directed. |
| 67 | Supply and fix in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed. |
| 68 | Supply and fix in repairs vitreous china wash basin full pedestal type, white, flat back, minimum size 510x410x140mm excluding taps, waste, chain and plug and porcelain stopper etc complete all as specified and directed. |
| 69 | Supply and fix chromium plated 40 mm dia waste coupling complete all as specified and as directed. |
| 70 | Supply and fix in repairs 10 Litres, PVC valveless syphonic action type, flushing Cistern, low level, white inlet, ball valve, float, and brackets inclluding 32mm PVC flush pipe suitable for flushing cistern complete all as specified and as directed. |
| 71 | Supply and fix as in repairs, chromium plated tubular towel rail 20 mm dia 60 cm long including brackets complete all as specified and as directed. |
| 72 | Supply and fix in repair chromium plated soap dish fixed to wall with brass chromium plated screws complete all as specified and directed. |
| 73 | Supply and fix in repair 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15mm bore iron pipe complete all as specified and as directed. |
| 74 | Supply and fix in repair 330 x 430 mm size cabinet mirror rectangular shape with 4 mm thick selected quality mirror and PTMT frame with openable door sutter with PTMT frame outside mirror as framed complete all as specified and directed. |
| 75 | Supply and fix in repairs 600 mmX450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers fixed complete all as specified and as directed. |
| 76 | Supply and fix 32/40mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed. |
| 77 | Supply and fix in repairs, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 78 | Supply and fix in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 79 | Supply and fix in repair 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
| 80 | Supply and fix in repair 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
| 81 | Supply and fix in repairs, 75 mm dia PVC(SWR) floor trap/nanhi trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 82 | Supply and fix in repair 75mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed. |
| 83 | Supply and fix in repair 110 mm bore PVC (SWR) junction single, (single T)equal provided with access door complete all as specified and as directed. |
| 84 | Supply and fix in repairs, 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 85 | Supply and fix in repairs, 110 mm CP grating complete all as specified and as directed. |
| 86 | Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed. |
| 87 | Material and labour for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 88 | Material and labour for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed. |
| 89 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 90 | Material and labour 15mm thick rendering externally on brick or concrete surfaces in CM (1:4) mixed with WPC @ 3 % by weight of cement finished even and smooth without using extra cement complete all as specified and directed. (Note : Water proofing compound to be measured and paid separately) |
| 91 | Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 92 | Material and labour for rendering 5mm thick in cement mortar (1:3) on fair faces of brick/concrete surfces as in ceiling finished even and smooth without using extra cement. |
| 93 | Supply only water proofing compound,( ISI marked) complete all as specified. |
| 94 | Material and labour for preparation of newly plastered surface of walls and applying two coats of acrylic distemper over a coat of primer over 1 mm thick wall care putty complete all as specified and as directed. |
| 95 | Material and labour for complete removal of the existing treatment of wall and applying two coat of acrylic distemper over a coat of primer over a coat of 1 mm thick wall care putty complete all as specified and as directed. |
| 96 | Material and labour for preparation of newly plastered surface of ceiling and applying three coats of white wash including preparation complete all as specified and as directed. |
| 97 | Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 98 | Material & labour for preparation of new surfaces of wall including applying a layer 1 mm wall care (weather proof putty) with primer for making the surface even & smooth and two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete, all as specified and as directed. |
| 99 | Material & labour for preparation of old surfaces of wall complete removal by washing, rubbing down dirty surface etc including applying a layer 1 mm wall care (putty) with primer for making the surface even & smooth and two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete, all as specified and as directed. |
| 100 | Material and labour for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed. |
| 101 | Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and as directed. |
| 102 | M & L hardcore of broken stones or boulders n .exc 15 cm thick of gauge n.exc 63 mm, deposited, sprayed and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed. |
| 103 | M & L heavy duty parking tiles size 300mm X 300 mm X 10 mm thick/ 400mm X 400 mm X 10 mm thick white cement and pigments of approved maked jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles complete all as specified and directed. |
| 104 | Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge. |
| 105 | Taking down ceiling/exhaust/wall fan including connection wires carefully and deposit to MES store in safe custody all as directed by Engineer-in-Charge. |
| 106 | M&L Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surface for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed. |
| 107 | All as per item No. 106 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as directed. |
| 108 | All as per item serial No. 106 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches. |
| 109 | All as per item serial No. 106 here-in-before but One socket outlet 3 pin 6 Amp on independent board. |
| 110 | All as per item serial No. 106 here-in-before but One light point controlled by two 2 - way switches. |
| 111 | All as per item serial No. 106 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable. |
| 112 | S&F switch modular 6 amps 2 way I module complete all as specified and as directed. |
| 113 | S&F switch modular type 6 Amp 240 Volts single one way (ISI marked). |
| 114 | S&F modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 115 | S&F modular switch 1 way 16 amp, 1 module complete all as specified and as directed. |
| 116 | S&F modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 117 | S&F Buzzer, Ding Dong AC. 230 volts,single pole complete all as directed. |
| 118 | S&F modular Bell push switch, 5 Amps 230 volt complete all as directed. |
| 119 | S&F stepped type modular electronic fan regulator, two module size, flush type complete all as directed. |
| 120 | S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as directed. |
| 121 | S&F modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings. |
| 122 | Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 123 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 124 | S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 125 | Supply & fix in repair MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 126 | Supply & fix in repair MCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed. |
| 127 | S&F in repair/replacement MCCB four pole 63 A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed. Make:- Legrand Cat No 4200 15 or equivalent model of make Hager/Siemens/ ABB/Schneider /GE/C&S Electricals |
| 128 | S&F in repair MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule). |
| 129 | S&F in repair MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule). |
| 130 | Supply and fixing ceiling fans complete with blades, down rods,and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 131 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and directed. |
| 132 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed. |
| 133 | Supply, fixing and testing of Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypower Fero Glas caoting Technology for inner container and Heavy Duty seamless Incoloy 800 Glass lined heating element, vertical wall mounting complete with all accesories and PVC connecting pipe with whirl technology 15 mm bore 450mm long 2 Nos for hot and cold water supply with two years warrenty on product and 5 years warranty on inner container. |
| 134 | M&L for wiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. Please Enable Macros to View BoQ information |
| 135 | M&L for wiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender