Tender For Construction Of Indoor Stadium. Building At Bhanjraru, Tehsil Churah District Chamba (Hp) Under Css Of Pmjvk (Sub-Head:- Building Portion Including Water Supply & Sanitary Installation, Rain Water Harvesting System, Septic Tank And Site De
Tender Value
5.14 Crore
Estimated cost
Bid Submission
30 Oct 2026
7 days left
EMD
10.29 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Indoor Stadium. Building At Bhanjraru, Tehsil Churah District Chamba (Hp) Under Css Of Pmjvk (Sub-Head:- Building Portion Including Water Supply & Sanitary Installation, Rain Water Harvesting System, Septic Tank And Site Development)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-in-Charge and returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-In-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 2 | Excavation in hilly area in all heights and depths and in all kind of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling, wedging out of rock (where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines, grades, cutting and trimming of side slopes and level as shown in the drawing and as directed by engineer-in-charge at site according to the MORD technical specification clause 302, 1603.1 and 1603.2 and sorting out useful materials and stacking the same in all leads and lifts and disposal of all surplus material to approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Govt. |
| 3 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 4 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 5 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 6 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etcetera complete as per Architectural drawing, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 7 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Stair cases (except spiral stair cases) with slopping or stepped soffits excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all heights leads, lifts and other incidentals and as directed by the Engineer-in-charge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 8 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 9 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all height and removal of the same for insitu-reinforced concrete & plain concrete work in weather shades, Chhajjas, corbels etcetera including edges including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 10 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all height and removal of the same for insitu-reinforced concrete & plain concrete work in window sills, cornice and moulding and the like including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 11 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 12 | Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and vibrated including curing complete excluding cost of forms work in foundation and plinth within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 13 | Providing and laying plan/reinforced cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed including curing complete including cost of forms work in Retaining walls, Breast walls and wing walls within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 14 | Providing and laying plain cement concrete 1:2:4 (One cement isto Two sand isto Four graded broken/crushed stone aggregate 20mm (Twenty millimetre) nominal size mechanically mixed vibrated and curing complete excluding cost of forms work in foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 15 | Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetres nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 16 | Providing and laying 40 mm (Forty millimetre) thick cement concrete flooring 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal one layer finished with a floating coat of neat cement, including cement slurry including preparation of surface grading complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 17 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100mm (One hundred millimetre) diametre PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specifications clauses 614, 709, 1204.3.7 complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 18 | Stone filling with hard stone of approved quality under floor and Backfilling with granular material behind abutment, wing wall and Retaining walls complete as per drawings and technical specification Clause 1204.3.8 complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 19 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 20 | Providing and laying in position machine batched and machine mixed and vibrated cement concrete design mix with minimum compressive strength of grade M-25 (M-twenty five) to obtain the minimum compressive strength of 25 N/MM² (Twenty five newton per square millimetre) for reinforced cement concrete work using cement contents not less then 360 kg/m3 (three hundred sixty kilogram per cubic metre) or as per appropved design mix in all work upto plinth level including pumping of concrete to site of laying but excluding cost of centring, shuttering, finishing and reinforcement including curing complete and admixtures in recommended proportion as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced content concrete work complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. as per specification approved drawing and design.The rate including the octroi, royality, Malkana, toll tax, sales tax, excluding GST and any other taxes imposed by the Government. |
| 21 | Providing and laying in position machine batched and machine mixed and vibrated cement concrete design mix with minimum compressive strength of grade M-25 (M-twenty five) to obtain the minimum compressive strength of 25 N/MM² (Twenty five newton per square millimetre) for reinforced cement concrete work using cement contents not less then 360 kg/m3 (three hundred sixty kilogram per cubic metre) or as per appropved design mix in all work above plinth level upto all floor level including pumping of concrete to site of laying but excluding cost of centring, shuttering, finishing and reinforcement including curing complete and admixtures in recommended proportion as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced cement concrete work as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. as per approved drawing design and specification. The rate including the octroi, royality, Malkana, toll tax, sales tax, excluding GST and any other taxes imposed by the Government. |
| 22 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) for reinforced cement concrete work @320 kg/cum (at the rate Thre hundred twenty kilogram per cubic metre) or as per approved design mix All works above plinth level upto floor V level to give a smooth mechanically mixed and vibrated inclusing curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced cemenet concrete work including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 23 | Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (One cement isto Six coarse sand) etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding excluding GST and any other taxes imposed by the Government. |
| 24 | Providing tor steel reinforcement for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all of Thermo-Mechanically Treated bars of grade Fe-500D or more etcetera of Tata Tiscon/Sail complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 25 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (Viscosity grade-Ten) of approved quality using 1.7 kg/Sqm (One point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece cloth lightly soaked in kerosene oil etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 26 | Half brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:4 (One cement isto Four coarse sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 27 | Second class brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:6 (One cement isto Six coarse sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 28 | Second class brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in: Cement mortar 1:4 (One cement isto Four coarse sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 29 | 40 Cm (forty centmetre) / 60 cm (sixty centimetre) thick Cavity wall with second class common burnt clay building bricks with 5.50cm (five point fifty centimetre) / 25.5 cm (twenty five decimal five centimetre) wide cavity and consisting 11.5 cm (Eleven decimal five centimetre) thick inner wall laid in cemnet mortar 1:4 (one sand isto four sand) and 23 cm (twenty three centimetre) thick outer walls laid in cemnet mortar 1:6 (one sand isto six sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers) 6/8 (six/eight) width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm (ninety- hundred centimetre) length horizontal and vertical in cavity wall and curing complete (The mesurement of wall faces only one side will be considered for payment), including carriage of materials within all leads lifts and other incidentals. as per approved drawing. design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 30 | 40 Cm (forty centmetre) thick Cavity wall with second class common burnt clay building bricks with 17cm (Seventeen centimetre) wide cavity and consisting 11.5 cm (Eleven decimal five centimetre) thick inner & outer walls laid in cemnet mortar 1:4 (one sand isto four sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers) 6/8 (six / eight) width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm (ninety - hundred centimetre) length horizontal and vertical in cavity wall and curing complete (The mesurement of wall faces only one side will be considered for payment), including carriage of materials within all leads lifts and other incidentals. as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-ChargeThe rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 31 | Providing and fixing coloured anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for door,windows and ventilators of section no 14081, of Jindal / Hindalco with extruded built up standard tubular sections fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). including carriage of materials within all leads lifts and other incidentals. As per specification, drawing and direction by the Engineer -In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 32 | Providing and fixing coloured coated/ anodised aluminium work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling to be paid for separately) :for shutter of door window and ventilators including providing and fixing hinges/pirots and making provision for fixing of fittings wherever required inluding cost of EDPM rubber/neoprene socket as required (fittings shall be paid for seperately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 33 | Providing and fixing wood polymer composite (WPC) frame of SV woods/foresta including fixing of door frame to wall with M.S. screws 100 (One hundred) long with wooden or rawl plugs emedded in masonry complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 34 | 30 mm thick factory made Polyvinyl Chloride(PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 35 | Providing and fixing Fly proof stainless steel wire gauge to doors, windows and clerestory windows with M.S. flat 15x3mm (Fifteen into three millimetre) and nut and bolts complete stainless steel (Grade-304) wire gauge of 0.5mm (Zero point five millimetre) dia wire and 1.4mm (One point four millimetre) wide aperture with matching wood beading on both side complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 36 | Providing and fixing 8mm (Eight milimetres) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm (Two hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 37 | Providing and fixing 12mm (Twelve milimetres) thick (both Side) prelaminated water proof particle board in matt finish flat pressed three layer or graded wood particle board conforming to IS: 12823 as per of Action Tesa / Century / Greenlam / Merinolam / Kitlam / Vista approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete as per architectural drawings and directions of Engineer-in-Charge including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 38 | Providing and fixing 25mm (Twenty five millimetre) thick one side prelaminated water proof commercial board of Century Ply / kit ply exterior//interior grade ISI marked No. 12823 for SDB shutters with 6mm (Six millimetre) thick hard wood edging all round and PGI sheet lining inside of the shutters of approved shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 39 | Providing and fixing 6mm (Six millimetre) thickness (weight not less than 15.00 kg/ sqm) (Fifteen point zero zero kilogram per sqaure metre) Glass panes of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 40 | Providing and fixing 5mm (Five millimetre) thickness (weight not less than 12.50 kg/ sqm) (Twelve point five zero kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 41 | Providing and fixing 4mm (Four millimetre) thickness (weight not less than 10.00 kg/ sqm) (Ten point zero zero kilogram per sqaure metre) frosted Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, excluding GST and any other taxes imposed by the Government. |
| 42 | Providing and fixing 25mm (twenty five millimetres) thick water proof Termite resistant commercial board of Uniply/ Green ply/Century ply/Kit ply /Duro ply / Marino (ISI Marked ) for cup board shutters including 19 mm (Nineteen millimetre) thick shelves and back side of the cub board shall be of 8 mm (Eight millimetre) thick ply and all cut portions of shutter shall have 6mm /8 mm (Six millimetre/Eight millimetre) thick hard wood edging. The shutter from out side shall to be finished with 1mm (One millimetre) thick lamination of Century / Greenlam / Action Tesa / Merinolam of approved shade including fixing Top PTMT handles 125mm (One hundred twenty five millimetre) long shall be provided in wood colour with nickel plated piano hinges including fixing with nickel plated piano hinges with screws etcetera. (Area for Payment shall be measured for front face only) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 43 | Providing and fixing Cup-board shutter magnetic catcher with necessary screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 44 | Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make approved quality) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 45 | Providing and fixing Stainless steel curtain rail with rollers stop ends and brackets in pelmets with curtain rod of 25 mm (Twenty five millimetre) diametre and brackets etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 46 | Providing and fixing 300x16mm (Three hundred fifty into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade coloured anodized AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 47 | Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetres) nominal size coloured anodized aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 48 | Providing and fixing aluminium 250x10mm (Two hundred fifty into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 49 | Providing and fixing coloured anodized aluminium 150x10mm (One hundred fifty into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 50 | Providing and fixing 150mm (One hundred fifty millimetres) nominal size coloured anodized aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 51 | Providing and fixing 125mm (One hundred twenty five millimetres) nominal size coloured aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 52 | Providing and fixing 250mm (Two hundred fifty milimetres) size coloured aluminum hooks and eyes with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 53 | Providing and fixing Aluminum Hydraulical door closer with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 54 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 55 | Providing and laying 19 mm thick Chima Pink / Dark Brown Granite stone flooring in combonation with Lakha red granite/ Black Granite as per pattern and detail laid over 20mm(Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, Semi / Round Nosing , edging and moulding wherever required etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 56 | Providing and laying 19mm (Nineteen millimetre) thick Polished Grey Chima Pink Granite Stone having Semi / Round nosing in work top of Pantary / under counter wash basin and water trough laid over 20mm (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone includingrubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 57 | Providing and laying 19 mm (Nineteen millimetre) thick Polished flamed dark brown Granite Stone in single piece with uniform nosing / edging laid in tread of steps/keema pink/gray granite stone piece in riser of steps. over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 58 | Providing and laying 9.00 mm (Nine millimetre) thick Teraflex wooden flooring (as per technical requirements) including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of toll tax, excluding GST and any other taxes imposed by the government |
| 59 | Providing and laying high-density, durable & slip-resistant interlocking rubber tiles of thickness 15 mm /20mm (Fifteen millimetre/Twenty millimetre) in general & 35 mm (Thirty five millimetre) specialized for heavy drop/ deadlift zones (as per technical requirements including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of toll tax, excluding GST and any other taxes imposed by the government |
| 60 | Providing and laying 300x300 mm (Three hundred into three hundred millimetre) size antiskid ceremic tiles of premium quality of Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson tiles as per approved shade in flooring in cement mortar 1:3 (One cement isto Three sand) finished with flush pointing in white cement as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 61 | Providing and fixing 19 mm (Nineteen millimetre) thick China Pink/Dark brown Granite in combination with lakha red/black granite and detail gang saw cut, mirror polished, premoulded and prepolished, in skirting and similar locations of required size, approved shade, colour and texture laid over 20mm (Twenty millimetre) thick base cement mortar 1:3 (One cement isto Three coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera apto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 62 | Providing and laying 300x450 mm (Three hundred into Four hundred fifty millimetre) size Ceremic Glazed tiles of Kajaria/ Nitco / Simpolo/Somany / Orient and Bell / AGL/Johnson in skirting risers of steps and dados with one Border matching Contrast at top in cement mortar 1:3 (One cement isto Three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 63 | Providing and laying 300x300x25mm (Three hundred into Three hundred into Twenty five millimetres) Labrador Design ( Rainbow Series) tiles of NTC / Unistone / Atlantic in flooring of ramp for person with disability on 20mm (Twenty millimetre) average thick base of cement mortar 1:4 (One cement isto Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 64 | Providing and fixing 50mm (Fifty millimetre) diametre SST (Stainless steel) pipe of Kich handrail slip resistant with round ends in ramp at two level i e 75cm and 90cm (Seventy five centimetre and Ninety centimetre) height with 25mm (Twenty five millimetre) diametre M.S hollow pipe balusters welded to 50mm dia SST pipe embedded in cement concrete 60cm (sixty centimetre) centre to centre and jointing with electrical gas welding at top alongwith hand rail of hollow M.S. (Mild Steel) pipe of 50mm (Fifty millimetre) diametre. It should extend 30cm (Thirty centimetre) beyond top and bottom of the ramp complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 65 | Providing and fixing 50mm (Fifty millimetre) diametre SST (Stainless steel) pipe handrail fixed with 35mm (Thirty five millimetre) diametre stainless steel baluster as per detail in combination of 35x35mm (Thirty five into thirty five millimetre) diametre and 15/20mm (Fifteen/Twenty millimetre) Stainless Steel pipe baluster knock down railing of KICH hand rail fixed on 10x50mm (Ten into Fifty millimetre) stainless steel flat balusters placed at 1200 mm (One thousand two hundred millimetre) centre to centre along with 3 nos(Three Numbers) @ 16mm (Sixteen millimetre) mid rail connected at the side of the baluster with fixtures. The baluster would be fixed on the floor with casted base plate minimum 6mm (Six millimetre) thick base plate shall be concealed with suitable S.S. 316 grade cover cap .railing made of Hollow tubes, channels, plates etcetera including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etcetera of required size, on the top of the floor or the side of waist slab with suitable arrangement complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 66 | Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6 mm (Six millimetres) diametre and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 67 | Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 68 | Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet (ISI marked-Z-120) of Tata Durashine / Sail / Reliance / JSW in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametre with prepainted limpet and rubber washers complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 69 | Providing and fixing minimum 30cm (Thirty centimeters) wide 25cm (Twenty five centimeters) deep of 0.63mm (Zero decimal six three milimetres) thick plain G.I. sheet gutter of TATA/ Sail/Reliance/Jindal with iron brackets 40x3mm (Forty into Three milimetre) size dome shape grating shall be provided which shall be M.S. plate 25x5/ 6mm (Twenty five into five/six millimetre) square round shape with 6mm (Six millimetres) diametre bars in dome including bolts and nuts and washers and including making necessary connections with rain water pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 70 | Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge. including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 71 | Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD (P-3160-3mm) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed upto 300mm (Three hundred millimetre) vertically. The second coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millilitre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 72 | Providing and fixing flashing 38cm (Thirty eight centimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 73 | Providing and fixing 150 mm (One hundred fifty millimetre) diametre on wall face unplasticised Rigid PVC (D-Plast) rain water pipes single socketed conforming to IS : 13592 Type A ISI marked of Finolex/Relpipe (Reliance) /Vectus working pressure not less than 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure), including jointing with seal ring conforming to IS : 5382 including jointing with seal ring leaving 10mm (Ten millimetre) gap for thermal expansion including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 74 | Providing and fixing 150mm (One hundred fifty millimetre) Plain Bend on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 75 | Providing and fixing 150mm (One hundred fifty millimetre) Plain Shoe on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 76 | Providing and fixing PVC holder bat clamps of approved design to PVC rain water pipe and making good the walls etcetera; as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 77 | Structural steel work of Tata / Sail / Reliance/Jindal riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 78 | Providing and fixing M.S. channels Frames 75x40x4 mm (Seventy five into forty into four millimetre) M.S. angle iron 25x20x3 mm (Twenty five into twenty into three millimetre) for doors, windows, frames manufactured from M.S. T - section 25x25x3 mm (Twenty five into twenty five into three millimetre) and Z- Sections with M.S. flat 75mmx4mm (Seventy five millimetre into four millimetre) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold including thrashold of M.S. angles means lugs, with split and tails to each jamb including iron butt hinges 2.5mm (Two point five millimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 79 | Providing and fixing railing having readymade M.S. hollow pipe (D-section) 50x50 mm (fifty into fifty millimetre) diametre handrail with M.S flat as per detail baluster of 19x19mm (Nineteen into nineteen millimetre) M.S. solid square bars with a clear height of 85 cm (Eighty five centimetre) as 30 cm C/C (at the rate thirty centimetre centre to centre) jointing in cement concrete steps. The vertical balusters to be welded/jointed with M.S. hollow handrail. including one coat of red oxide priming coat complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 80 | Painting two or more coats (including priming coat) with Nerolac/Asian paint on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 81 | Painting two coats (including priming coat) on over new wood and wood based surfaces with enamel paint of Nerolac/ Asian brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 82 | Providing 6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto Three sand) upto all floor levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 83 | Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including making groove or drip course, arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand) upto floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 84 | Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand) above plinth level to floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 85 | Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for exterior plastering including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement isto Five sand) above plinth level to floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 86 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etd (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 87 | Providing and fixing 12mm.(Twelve millimetre) thick Unistone/NTC/Atlantia stone cladding on wall surfaces /reinforced Cement Concrete surface side as on faces of Arch masonry walls etcetera on 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 88 | Providing and applying 20mm (Twenty millimetre) thick Pattern in cement Plaster with cement Mortar 1:4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 89 | Providing plinth protection with 40mm (Forty millimtre) thick NTC/unistone/Atlantic factory made cement concrete interlocking paver block of M -30 (M-Thirty) grade made by block making machine with strong vibratory compaction, of approved size, design and shape with 23cm (Twenty three centimetre) diametre half round reinforced cement concrete pipe for drainage purpose fixed 10cm (Ten centimetre) thick cement concrete 1:4:8 (One cemnt isto Four Sand isto Eight graded crushed stone aggregate, bedding laid in required colour and pattern filling the joints with line sand etcetcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 90 | Applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 91 | Finishing walls with apex weather proof exterior emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm (One point forty three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 92 | Wall painting (two or more coats) with acrylic washable emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 93 | Providing and fixing 595x595x6mm (Five hundred ninety five into five hundred ninety five into six millimetre) designer board of everest (E-Board) ceiling with pre painted G.I. channel framing @ 600mm (Six hundred millimetre) Centre to Centre complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 94 | Providing and fixing 8 mm (Eight millimetre) thick teak ply over 50x31 mm (Fifty into thirty one) soft wood grid frame work at 600 mm (Six hundred millimetre) centre to centre with decorative teak wood beading over teak ply of size 25 x 12 mm (Twenty five into twelve) having moulding on both sides cornice/edging on top of panelling to be finished with 55 x 30 mm (Fifty five into thirty) millimetre teak wood beading as per detail complete as per PWD specification, approved drawings, design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 95 | Providing and fixing acoustical wall panels of size 600 mm × 1200 mm × 25 mm (Six Hundred Millimetres × Twelve Hundred Millimetres × Twenty Five Millimetres) of approved make such as Dexune Acoustical / Himalayan Acoustical Panels , fixed to wall surface with steel screws, complete as per detailed drawings and specifications and as directed by the Engineer-in-Charge. The rate shall include cost and carriage of all materials, labour, tools and plants, scaffolding, fixing charges, loading, unloading, all leads and lifts, and all other incidental charges required for proper completion of the work, complete in all respects and to the entire satisfaction of the Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 96 | Providing and fixing 1620 20mm (Twenty millimetres) Outer diameters Polyethelene-Aluminium / Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera, with clamps at 1.00 (One) metre spacing for concealed work including cutting chases and making good the wall etcetera. This includes testing of joints complete as per architectural drawings specification including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 97 | Providing and fixing 2025 25mm (Twenty five millimetres) Outer diameters Polyethelene-Aluminium / Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera, with clamps at 1.00 (One) metre spacing for concealed work including cutting chases and making good the wall etcetera. This includes testing of joints complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 98 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty millimetre to forty millimetre) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 99 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diametres High pressure PVC waste and ventilating having pressure pipes 4.00 kg/cm2 (Four point zero zero kilogram per centimetre square) of Finolex/ Vectus/Relpipe (Reliance) including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 100 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diametres High pressure PVC waste and ventilating having pressure pipes 4.00 kg/cm2 (Four point zero zero kilogram per centimetre square) of Finolex/ Vectus/Relpipe (Reliance) including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 101 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diametres P.V.C clamps ISI marked of Finolex/Relpipe (Reliance)/Vectus etcetera including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 102 | Providing and fixing 75mm (Seventy five millimetre) nominal size P.V.C clamps ISI marked of Finolex/Relpipe (Reliance)/Vectus etcetera including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 103 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diametresPVC Finolex/Relpipe(Reliance)/Vectus Heal Rest Confirming to BIS-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 104 | Providing and fixing 75mm (Seventy five millimetre) nominal size PVC Finolex/Relpipe(Reliance)/Vectus Heal Rest Conforming to BIS-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 105 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC plain bend of required degree ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 106 | Providing and fixing 75mm (Seventy five millimetre) nominal size PVC plain bend of required degree ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 107 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC Collar of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 108 | Providing and fixing 75mm (Seventy five millimetre) nominal size PVC Collar of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 109 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC Cowl of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 110 | Providing and fixing 75mm (Seventy five millimetre) nominal size PVC Cowl of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 111 | Providing and fixing 110x90mm (One hundred ten into ninety millimetres) nominal size/diameter PVC floor trap ISI marked Finolex/Relpipe(Reliance)/ Vectus Conforming to IS-14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government |
| 112 | Providing and fixing 110x75mm (One hundred ten into seventy five millimetres) nominal size/diameter PVC floor trap ISI marked Finolex/Relpipe(Reliance)/ Vectus Conforming to IS-14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government |
| 113 | Providing and fixing white vitreous china pedestal type water closet (European type)No 20087 (S - 10 ) Size 57x 35x39cm (Fifty seven into thirty five into thirty nine millimetre) nominal size with seat and lid, 10 litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings and C.I. brackets, 40 mm (Forty millimetre) flush bend 20mm (Twenty millimetre) over flow pipe with seat & lid fixed with C.P. brass hinges and rubber buffers,with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand. (Jet Spray to be measured and paid for separately) complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 114 | Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm (Five hundred thirty into Four hundred ten millimetre) with integral type foot rests with 100 mm (One hundred millimetre) diametre sand cast Iron P or S trap, 10 litre (Ten) low level P.V.C. flushing cistern having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including cutting and making good the walls and floors wherever required necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 115 | Providing and fixing 32mm (Thirty two millimetre) diametre P.V.C. flexible waste pipe of Finolex/ Relpipe (Reliance) / Vectus for sink or wash basin including P.V.C. waste necessary fitting complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 116 | Providing and fixing G.I. inlet connection for each flush pipe with W.C. pan including necessary fitting complete including entire carriage of material complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 117 | Providing and fixing vitreous china wash basin garnet No-10080 of Cera / Hindware Jaguar/Snow white/star white shade 58x43cm (Fifty eight into forty three centimetres) under counter basin with single hole for pillar tap including 15mm (Fifteen millimetre) diametre Pillar Tap with C.I. or M.S. brackets painted white including cutting holes and making good the same with pedestal but excluding fittings including neccessary fitting complete as per architectural drawings. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 118 | Providing and fixing white vitreous china flat back range of three half stall urinal no 60002 of size 39x37.5x59cm (Thirty nine into thirty seven point five into fifty nine centimentre) with white PVC automatic flushing cistern of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details with ittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required with 10 (Ten) litre P.V.C. automatic flushing cistern including necessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 119 | Providing and fixing white vitreous china flat back range of two half stall urinal no 60002 of size 39x37.5x59cm (Thirty nine into thirty seven point five into fifty nine centimentre) with white PVC automatic flushing cistern of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details with ittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required with 10 (Ten) litre P.V.C. automatic flushing cistern including necessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 120 | Providing and fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grals at 78 cm (Seventy eight centimitre) height fixed with all and floor as per detail and specification. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, excluding GST or other taxes imposed by the Government. |
| 121 | Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40mm (Forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid each including necessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 122 | Providing and fixing White Vitreous China Flat back Matrix wash basin 550x400mm (Five hundred fifty into Four hundred millimetre) of Cera / Hindware / Jaquar with single 15mm (Fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 32mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 123 | Providing and fixing 32mm (Thirty two millimeter) nominal size / diameters M.I. union for wash basin or sink including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 124 | Providing and fixing 15mm (Fifteen millimetres) nominal bore P.V.C. connection pipe with brass union 45cm (Forty five Centimeters) length complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 125 | Providing and fixing 100mm (One hundred millimetres) diametre C.P. iron grating of Superior quality of Continetal series of Jaquar/Classik series of Hindware/Floral series of Cera/Vintage series of Kerovite and Hindon series of JAL for floor, gully or Nahni trap including neccessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government.. |
| 126 | Providing and fixing 75mm (Seventy five millimetres) diametre C.P. iron grating of Superior quality of Continetal series of Jaquar/Classik series of Hindware/Floral series of Cera/Vintage series of Kerovite and Hindon series of JAL complete for floor, gully or Nahni trap including neccessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government.. |
| 127 | Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetres) beveled edge mirror of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintagee series of Kerovite & Hindon series of Jal of superior glass (of approved quality) complete with 6mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 128 | Providing and fixing 600x20mm (Six hundred into twenty millimetres) size CP Brass towel rail of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintagee series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour including neccessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 129 | Providing and fixing Plastic Liquid soap container with C.P. brass lid and brackets fixed to wooden plugs with C.P. brass screws including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 130 | Providing and fixing C.P. Brass toilet paper holder (Heavy duty make ISI marked No. 8931 & 8934) of approved brand and manufacture continental series of Jaquar/Classik series of Hindware/Floral series of Cera/Vintage series of Kerovite and Hindon series of JAL including neccessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 131 | Providing and fixing 8mm (Eight millimetre) diametre C.P./Sstainless steel Jet of Continental series of Jaquar / Classik series ofHindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal with flexible tube upto 1 (One) metre long with S.S. triangular plate to Eureopean type W.C. of quality make and approved quality complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 132 | Providing and fixing 600x120x5mm (Six hundred into One hundred twenty into five millimetres) glass shelf of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (Fofrty millimetre) long screws, rawl plugs etcetera including necessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 133 | Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass. Bib tap of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal approved quality (superior or heavy type) and colour complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 134 | Providing and fixing 15 mm (Fifteen millimetre) nominal bore C.P. brass stop cock (concealed) of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal including necessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 135 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass angle valve of of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal including necessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 136 | Providing and fixing 15 mm (Fifteen millimetre) nominal bore C.P.push cock of Continental series of Jaquar/Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal without nuts and pipes including necessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 137 | Providing and fixing 15mm (Fifteen millimetres) nominal bore/diametre brass full way valve with wheel of Continental series of Jaquar/Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal without nuts and pipes including necessary fitting complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 138 | Providing and fixing 15mm (Fifteen millimetres) nominal bore C.P. brass valve (Horizontal plunger type) High pressure with polythene plastic floats of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 139 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC single equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 140 | Providing and fixing 75 mm(Seventy five millimetre) nominal size PVC single equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete. The vender certificate guarantee/warranty against manufacturing defects or functional failure of parts like ceramic bodies and inner components etcetera must be required before releasing the payment. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 141 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC double equal branch with oval access door, ISI marked of Finolex/Supereme/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 142 | Providing and fixing 75mm (Seventy five millimetre) nominal size PVC double equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 143 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (Three millimetre) thick ISI marked of Finolex/Relpipe (Reliance)/Vectus complete including fixng with approved adhesive etcetera complete in all floor level/height etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 144 | Providing and fixing 75 mm(Seventy five millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (Three millimetre) thick ISI marked of Finolex/Relpipe (Reliance)/Vectus complete including fixng with approved adhesive etcetera complete in all floor level/height etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 145 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC Finolex/Relpipe (Reliance)/Vectus offset 45° (Forty five degree) ISI marked including fixing with approved adhesive and necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 146 | Providing and fixing 75 mm(Seventy five millimetre) nominal size PVC Finolex/Relpipe (Reliance)/Vectus offset 45° (Forty five degree) ISI marked including fixing with approved adhesive and necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 147 | Providing and placing on terrace (at all floor levels polyethylene water storage tank, tripple layer of Finolex/Relpipe (Reliance)/Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings and the base support for tank ccomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 148 | Providing and laying cement concrete 1:5:10 (One cement isto Five sand isto Ten graded crushed stone aggregate 40mm (Forty millimetres) nominal size in all round for PVC pipe of 150mm (One hundred fifty millimetres) internal diametre including bedding necessary form work and curing ccomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 149 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five coarse sand (zone- III) isto three graded crushed stone aggregate 20 mm (Twenty millimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size finished with floating coat of neat cement complete as per standard design Inside size 90x80 cm (Ninety into eighty centimetres) and 45 cm (Forty five centimetres) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 kg (Thirty eight kilogramme) (weight of cover 23 kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme)) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 150 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five coarse sand (zone- III) isto three graded stone aggregate 20 mm (Twenty millimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded crushed stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded crushed stone aggregate 20 mm (Twenty millimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm (One hundred twenty into ninety centimetres) and 90 cm (ninety centimetres) deep including C.I. cover with frame (medium duty) 455x610 mm (Four hundred fifty five into six hundred ten millimetres) internal diameter, total weight of cover and frame should not be less than 38 kg (Thirty eight kilogramme) (weight of cover 25 kg (Tenty five kilogramme) and weight of frame 15 kg (Fifteen kilogramme)) : With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 151 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg (Thirty eight kilogramme) (weight of cover 23 kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme)), R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five Fine sand isto three graded stone aggregate 20 mm (twenty millimetres) nominal size), foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten millimetres) and 45 cm (Forty five centimetres) deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five centimetres) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 152 | Providing and fixing 600x300mm (Six hundred into Three hundred millimetres) nominal size of Division Plate for Urinals Hindware /cera/Jaquar of star white / snow white shade and (Heavy duty make ISI marked No- 8931 & 8934) of approved quality and colour complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 153 | Providing and laying 20 mm (Twenty millimetre) nominal bore in trenches, galvanised mild steel tubes (medium grade) with G.I fittings including trenching and refilling etcetera complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 154 | Providing and fixing 15mm (Fifteen milimetres) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) ISI make approved quality tube fitting and clamps including making good the wall, ceiling and floor complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 155 | Providing and laying 150mm (One hundred fifty millimetre) nominal bore/diameter (to level or slopes) PVC pipe grade 'A' and jointing with approved adhesive including testing of pipes and joints complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 156 | Excavating trenches of required width for pipes, cables, etcetra including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetree) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus excavated soil as directed including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. . |
| 157 | Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogram) Of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per HP. PWD specifications excluding cost of centring and shuttering including carriage of material within all leads, lifts and other incidentals and as per the direction of Engineer in charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 158 | 20 mm (Twenty millimetres) cement plaster in two coats, backing coat 10 mm and finishing coat 10 mm (Ten millimetres) thick on fair side of brick/stone masonry walls for interior plastering up to floor two level including arrises, internal rounded angles, chamfers and/or rounded angles in cement mortar 1:4 (One cement isto four sand), complete in all respects as per HP PWD specifications and as directed by the Engineer-in-Charge. including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 159 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diametres High pressure PVC waste and ventilating having pressure pipes 4.00 kg/cm2 (Four point zero zero kilogram per centimetre square) of Finolex/ Vectus/Relpipe (Reliance) including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 160 | Providing and fixing 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.I. manhole with frame cover weight 38KG (thirty eight kilograms) (single seat) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 161 | Providing and fixing of water lifting pump of 1.00 HP (One point zero horse power) of serex/Kirloskar/Crompton/Wortington including all necessary fittings complete in all respect including entire carriage of materials within all leads lifts and other incidentals, and as per specification and as per directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. |
| 162 | Providing 20 mm × 20 mm (Twenty into twenty millimetres) square bar M.S. foot rest including fixing in manholes with 20 cm × 20 cm × 10 cm (Twenty into twenty into ten centimetre) cement concrete 1:3:6 (one cement isto three sand isto six graded/crushed stone aggregate) using 20 mm (Twenty millimetres) nominal size aggregate, complete as per standard design, including carriage of all materials with in all leads and lifts and other incidentals. as directed by the Engineer-in-Charge.\\"The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, excluding GST and any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender