Tender For Additional Repair/ Renovation Of Public Health Services At 2Nd Vip Block, Olympian Balbir Singh Senior International Hockey Stadium, Sector-63, S.A.S. Nagar And All Other Works Contingent Thereto.
Tender Value
9.85 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
10 days left
EMD
19710
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
S.a.s Nagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional Repair/ Renovation Of Public Health Services At 2Nd Vip Block, Olympian Balbir Singh Senior International Hockey Stadium, Sector-63, S.A.S. Nagar And All Other Works Contingent Thereto.
BOQ
| Sl. No. | Item Description |
| 1 | Flooring and Dados |
| 2 | Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.) |
| 3 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 4 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. (Wall tiles) |
| 5 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 7 | Carriage of Malba from site of work to dumping ground complete in all respects |
| 8 | Internal Public Health Services |
| 9 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 10 | Through wall 22.86 cm thick |
| 11 | Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 12 | Chinaware extended wall mounted E W.C. with matching chinaware cistern and seat cover complete in all respect. |
| 13 | Providing and fixing in position vitreous Chinaware white Senso urinal size 37 x 39 x 61 cm of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm complete in all respect. |
| 14 | Providing and fixing partition for different type of urinals. |
| 15 | Toughned Glass Partition 8mm thickness size 450 x 900 mm C/S |
| 16 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 17 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in- charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 18 | Size 560mm x 450mm (Under counter oval) |
| 19 | Providing and fixing in position C.P. Brass Auto close Pillar Cock of approved make (to the approval of Engineer-in-charge) |
| 20 | Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-incharge) complete in all respect. |
| 21 | Providing and fixing in position paper holders of approved make (to the approval of Engineerin- charge ) fixed in to wall with C.P brass screws complete in all respect. |
| 22 | C.P. brass toilet paper holder |
| 23 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect |
| 24 | C.P brass towel ring |
| 25 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 26 | Size 600mmx450mm |
| 27 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 28 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 29 | C.P. Brass extension piece, 25mm long to 50mm long |
| 30 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 31 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 32 | C.P.brass 15mm Angle valve without flange |
| 33 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 34 | PVC tube connection of size 15 mm x 450 mm with Brass nut |
| 35 | Dismantling Sanitary fixtures such as Eurpoean / Indian / Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 36 | Eurpoean/Indian/Orissa W.C., |
| 37 | PVC / China Ware Cistern |
| 38 | Wash Hand Basin / Urinal Pot |
| 39 | CP Bib Cock/Angle Cock |
| 40 | Wall mixer / Sink Mixer / Basin Mixer |
| 41 | Bathroom Accessories |
| 42 | Providing and fixing Toilet cubical(of following standard dimension which includes 600mm door size width) made up of thermosetting resign treated high pressure ,self supporting decorative compact laminates with permanently incorporate anti-bacterial agents during manufacturing . Compact board should be resistance to water immersion through permissible increase on thickness and mass <0.60% and board density >1.35kg/cm3 and fulfilled the criteria of FSC and green guard gold certification and manufactured under EN438-2&3:2005 standard. 12mm thick compact board should be Moisture resistant, Impact resistant, termite resistant ,Scratch resistant ,Weather and climatic shock resistant. Finish of compact laminates should be suede finish which includes door, pilasters and intermediate panels finished with approved texture/shades as per IS2046 and fulfilled the criteria of fire retardant under BS-476/97 and EN:438-6 and cleassification of BS1D0 standard. Pilaster to be supported with SS (grade316) adjustable foot and intermediate panels will attached to the wall with the help of approved aluminium channels and all required hardware, made up of stainless steel as per manufacturer’s specification and instruction of Engineer-in-charge like Door knob, gravity hinges,Thumb turn locksets with occupancy indicators ,coat hooks with door stoper , U channel, top rail with corner connector, adjustable foot/pedestal,Rubber noice deafening tape, screw & wall plugs. The top fitting should consist of anodized aluminium metal top rail(as per manufacturer specification) which will directly get fixed with pilaster ,Aluminium corner bend (connected with top rail ) will be use in corner of cubical in absence of brick wall, Aluminium wall fixing is used only on the wall which will hold the top rail. All screw will of 304 grade in SS with stain finish. Pilaster shoud be raised from the the floor with a clearance height upto 150 mm with the help of adjustable leg.Finish and colour of Toilet cubical should be approved under guidance of engineer-in-charge.Classique-Versatile model of Greenlam Sturdo |
| 43 | 1.01- Toilet cubical with standard dimension of 1995mm(H)x1000mm(W)x1500mm(Depth), which includes 600mm door size width or as per drawing. |
| 44 | 1.01- Toilet cubical I- shape(front partition)with standard dimension of 1995mm(H)x1000mm (W) which includes door size width or as per drawing. |
| 45 | 1.01- All aspect specified by the manufacturers , Greenlam sturdo Classique Evergreen model or equivalent. |
| 46 | Carriage of Malba from site of work to dumping ground. |
| 47 | Less Rebate on Old Materials Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender