Tender For Special Repair To Bldg No P-2 At 952 Tpt Coy Asc Type A Under Ge Narangi
Tender Value
48.42 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
14 days left
EMD
96854
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-2 At 952 Tpt Coy Asc Type A Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed. |
| 3 | Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed. |
| 4 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed. |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed. |
| 6 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed. |
| 7 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed. |
| 9 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed. |
| 10 | Dismantling timber scantlings 40 sq. cm and over in section, in any position as in Framed work etc complete all as specified and as directed. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed. |
| 12 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet) etc complete all as specified and as directed. |
| 13 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed. |
| 14 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed. |
| 15 | Taking up or down 15mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 16 | Taking up or down 20 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 17 | Dismantling water tanks and removing to store (exc 500 and not exc 1000 ltr capacity) etc complete all as specified and as directed. |
| 18 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed. |
| 19 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 20 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 21 | S&F 1.0mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings/Eves Boards etc (length and girth as fixed) etc fixed with self tapping screws etc complete all as specified and as directed. |
| 22 | S&F false ceiling with suspended system of size 600X600mm of standard section consisting of main runner of size 15X32mmX0.30mm thick , cross Tee (15X32mmX0.30mm) and wall angle (15X15mm X0.30mm , ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with 4 mm thick E board HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed. |
| 23 | M&L for 75 mm thick cement concrete type D- 2, (1:4:8) (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed. |
| 24 | M&L for cement concrete type B-0 (1:2:4) (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed. |
| 25 | M&L for 75 mm thick PCC (1:3:6), type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 26 | M&L for Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes etc complete all as specified and as directed. |
| 27 | M&L for Screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes etc complete all as specified and as directed. |
| 28 | M&L for Rendering 10 mm thick in CM (1:3) for backing coat of tiles / dado etc complete all as specified and as directed. |
| 29 | M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 30 | M & L for Joint Free Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 31 | All as per item No 30 above but as in skirting /dado / Vertical Surface etc complete all as specified and as directed. |
| 32 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing incl cutting edges etc complete all as specified and as directed. |
| 33 | All as per item No. 32 above but as in skirting /dado / Vertical Surface etc complete all as specified and as directed. |
| 34 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete etc complete all as specified and as directed. |
| 35 | M&L Glazed ceramic tiles (Coloured) as in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed. |
| 36 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 37 | M&L for 18 to 20mm thick marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green marble complete all as specified and as directed. |
| 38 | S&F for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over etc complete all as specified and directed. |
| 39 | M&L Sand cushioning bed for laying of interlocking tiles incl spreading, levellling and well ramming to receive the tiles etc Complete all as specified and as directed. |
| 40 | M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment filling the joints with sand witth plate vibrator etc complete all as specified and as directed. |
| 41 | M&L for plain cement concrete (1:4:8) type D-2, with using 40 mm grades stone aggregates as in foundations and mass concrete etc complete all as specified and as directed. |
| 42 | M&L Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and as directed. |
| 43 | M&L Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) etc complete all as specified and as directed. |
| 44 | M&L for Pre-cast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM (1:6) etc complete all as specified and directed. |
| 45 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed. |
| 46 | M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed. |
| 47 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately |
| 48 | M&L providing cement concrete type B0 (1:2:4) (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 49 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 50 | S&F Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed. |
| 51 | S&F 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 52 | S&F 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed. |
| 53 | M&L for 2nd class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads area exc 6 sqm but n.exc 13 sqm each etc complete all as specified and as directed. |
| 54 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawin etc complete all as specified and as directed. |
| 55 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed. |
| 56 | Elixir 3000 Series Windows: Providing and fixing windows, ventilators fabricated from roll formed sections made of Galvanized steel with PPE powder coated (Base steel as per IS 513 “D” quality. Hot dip galvanized as per IS 277 Zinc of 120 grams/sq.mtr.) With total coated thickness 0.72 for outer frame 98x50x0.72mm & 0.58mm for other sections. Section for additional mullion should be of 30mmx44mmx0.72mm thickness, section for shutter frame should be of 46mmx46mmx0.58mm thickness, section for fixed glass bead should be of 18mmx25mmx0.58mm thickness. Each glazed shutter should be provided with one set of SS 304 grade friction hinges, one number of high grade Aluminum powder coated handle. Glazed shutter and fixed glass portions should be provided with glass of 4mm thick plain glass. Windows should be provided with grill made of 10mm square bars welded to 6mmx15mm MS Flat. Distance between bars should not be more than 125mm centre to centre. Total grill unit should be PPE powder coated and fixed to window frame with screws. The frame and shutter sections should be cut to length and miter joined with corner brackets made of polypropylene. Mullion should be joined with frame / mullion using Nylon mullion cap, Ethyl propylene Diamine Monomer (EDPM) gasket should be used all around glass in shutter and between frame and glazed shutter and both sides of fixed glass. Window frame should be fixed to brick / concrete masonry by using Nylon self expanding sleeves and driving MS electroplated 150mm long screws into the sleeves through the frames. |
| 57 | M&L for cement concrete (1:3:6) type C-0 (using 12.50mm graded stone aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed. |
| 58 | S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed. |
| 59 | S&F 4mm thick sheet Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etcc omplete all as specified and as directed. |
| 60 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple etc complete all as secified and as directed. |
| 61 | S&F Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed. |
| 62 | S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed. |
| 63 | S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed. |
| 64 | S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed. |
| 65 | S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed. |
| 66 | S&F in repairs helical door spring of 150mm long smooth functioning, automatically closing incl welding / reveting etc complete all as specified and as directed. |
| 67 | S & F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. |
| 68 | S&F in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed. |
| 69 | S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 70 | S&F in repairs Viterous China urinals, Full Stall stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 40 mm dia bore 600 mm long LDPE incl 40 mm dia bore waste coupling etc complete all as specified and as directed. |
| 71 | S&F in repairs PVC deo flushing cistern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc 15 mm dai bore PVC connection 450 mm long complete all as specified and as directed. |
| 72 | S & F in repairs 15 mm dia bore CP Bib taps, fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed. |
| 73 | S&F in repairs 15 mm dia bore CP fancy type long body Stop valves/ Angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed. |
| 74 | S&F in repairs Bib Cock 2 way double handle with CP flange fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed. |
| 75 | S&F in repairs 15mm dai of bore Chromium plate Pillar taps Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and as directed. |
| 76 | S&F in repairs overhead round rain shower 8\\" Iwith out armns) of 15 mm bore dia etc complete all as specified and as directed. |
| 77 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed. |
| 78 | S&F in repairs 125mm bore dia Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and as directed. |
| 79 | S&F in repairs Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube including making connections and fixed in position etc complete all as specified and as directed. |
| 80 | S&F Jet spray including fitting etc complete all as specified and as directed. |
| 81 | S&F in 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and as directed. |
| 82 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed. |
| 83 | S&F in repairs Unbreakable corner shelf (3Pcs set i.e 8\\"-1, 10\\"-1 & 12\\"-1) complete all as specified and directed. |
| 84 | S&F in repairs Brass Chromium Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed. |
| 85 | S&F in repairs CP Towel ring Brass glossy finish complete all as specified and directed. |
| 86 | S&F GI Tubes, 15 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 87 | S&F GI Tubes, 20 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 88 | S&F rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed. |
| 89 | S & F in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 90 | S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed. |
| 91 | S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls/Floor etc etc complete all as specified and directed. |
| 92 | S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls/ floor etc complete all as specified and directed. |
| 93 | S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed. |
| 94 | S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed. |
| 95 | S&F PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed. |
| 96 | S&F 75 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed. |
| 97 | S&F PVC vent cowls of 75mm dia etc complete all as specified and as directed. |
| 98 | Complete removal exising treatment (External/Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed. |
| 99 | M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed. |
| 100 | M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 101 | M&L for Preparing Old plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 102 | M&L for preparation old plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed. |
| 103 | All as per item no 102 above but new plastered surface of wall complete all as specified and directed. |
| 104 | M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 105 | M & L for preparation of New wooden surfaces of any description exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 106 | S&F in repairs stainless steel decorative curtain rod of 25 mm bore incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed. |
| 107 | S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed. |
| 108 | M&L Cutting chases, pinning in, making good to facingsin brick walls where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed pipe line etc. and making good, cutting exceeding 20cm girth etc complete all a specified and as directed. |
| 109 | Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge. |
| 110 | Taking down ceiling/exhaust/wall fan including connection wires carefully and deposit to MES store in safe custody all as directed by Engineer-in-Charge. |
| 111 | M&L Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surface for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed.. |
| 112 | All as per item serial No. 111 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches. |
| 113 | All as per item serial No. 111 here-in-before but One socket outlet 3 pin 6 Amp on independent board. |
| 114 | All as per item serial No. 111 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable. |
| 115 | S&F switch modular type 6 Amp 240 Volts single one way (ISI marked). |
| 116 | S&F modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 117 | S&F modular switch 1 way 16 amp, 1 module complete all as specified and as directed. |
| 118 | S&F modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 119 | S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as directed. |
| 120 | S&F modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings. |
| 121 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as directed. |
| 122 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 123 | Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 124 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 125 | S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 126 | Supply & fix in repair MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 127 | Supply & fix in repair MCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed. |
| 128 | Supply & fix in repair MCB DB of sheet metal enclosure double door SPN 4 way with 200 A rated bus bar and grouted in wall with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate all as directed. |
| 129 | S&F in repair MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed. Make:- Legrand Cat No 4200 15 or equivalent model of make Hager/Siemens/ABB/Schneider/GE/C&S Electricals. |
| 130 | S&F in repair MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 131 | S&F in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 132 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 133 | Supply, fixing and testing of Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypower Fero Glas caoting Technology for inner container and Heavy Duty seamless Incoloy 800 Glass lined heating element, vertical wall mounting complete with all accesories and PVC connecting pipe with whirl technology 15 mm bore 450mm long 2 Nos for hot and cold water supply with two years warrenty on product and 5 years warranty on inner container. |
| 134 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and directed. |
| 135 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009. |
| 136 | S&F in repair LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed. |
| 137 | M&L for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 138 | M&L for wiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 139 | S& F steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as directed. |
| 140 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed |
| 141 | Cutting existing steel tubing of 40mm for alterations or additions complete all as directed by engineer-in-charge. |
| 142 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and directed. |
| 143 | Excavation in trenches n.exc 1.5mtr wide and n.exc. 1.5m in depth for foundation and getting out in soft/loose soil complete all as specified and directed. |
| 144 | Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed. |
| 145 | M&L for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified. |
| 146 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed. |
| 147 | Removing of excavated soil not exc 50cm & depositing where as directed at a level n.exc 1.5m above starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
| 148 | Removing of excavated soil not exc 50cm & depositing where as directed at a level n.exc 1.5m above starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender