Tender For Part A-Reshuffling & Washing Of Existing Natural Ballast, Supply & Filling Of New Layer Of 20Mm Crushed Ballast And Spraying Of Anti-Vegetation Liquid In 33/11 Kv Switchyard & 0.415/11 Kv Switchyard Of Diesel Generators At Diesel Power Hou
Tender Value
4.50 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
20 days left
EMD
9000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Part A-Reshuffling & Washing Of Existing Natural Ballast, Supply & Filling Of New Layer Of 20Mm Crushed Ballast And Spraying Of Anti-Vegetation Liquid In 33/11 Kv Switchyard & 0.415/11 Kv Switchyard Of Diesel Generators At Diesel Power House And 11/0.415Kv Switchyard Of Khara Hydel Colony Badshahibagh (Saharanpur). Part B-Fabrication Of Cable Trenches In 33/11 Kv Switchyard & 0.415/11 Kv Switchyard Of Diesel Generators At Diesel Power House And 11/0.415Kv Switchyard Of Khara Hydel Colony Badshahibagh (Saharanpur). Part C-Repairing & Replacing Of Damaged Fencing, Painting Of Fencing, Gates Etc Of 33/11 Kv Switchyard & 0.415/11 Kv Switchyard Of Diesel Generators At Diesel Power House And 11/0.415Kv Switchyard Of Khara Hydel Colony Badshahibagh (Saharanpur).
BOQ
| Sl. No. | Item Description |
| 1 | Part-A (Reshuffling & Washing of Existing Natural Ballast, Supply & Filling of New Layer of 20mm Crushed Ballast and Spraying of Anti-Vegetation Liquid).Removal of existing natural ballast from the entire cover area of 578 sqm up to depth of 2 inch. |
| 2 | Removal of existing vegetation like wild plants with root by cutting & uprooting process of switchyard and extended switchyard area and scrapping of rubbish outside the periphery of switchyard area. |
| 3 | Stacking of the existing natural ballast outside of switchyard |
| 4 | Washing of the existing natural ballast with high pressure jet equipment including required T&Ps and other arrangment. |
| 5 | Spraying of anti-vegetation liquid (1:50 Liter with water for 100sqm) |
| 6 | Refilling of washed existing natural ballast. |
| 7 | Spraying of anti-vegetation liquid (1:50 Liter with water for 200sqm) |
| 8 | Supply of 20 mm grade ballast in the total area 664 sqm area up to depth of 100 mm including including cartage charges |
| 9 | Refilling of supplied 20 mm grade crushed ballast |
| 10 | Part-B(Fabrication of Cable Trenches at 33/11 KV Switchyard & 0.415/11 KV Switchyard)Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits, not exceeding 0.5M in depth and earthwork in embankment to be in 20cm layers, including ramming & dressing the surface to reqd. levels and slopes. (SOR CSI No. 4.03) |
| 11 | Concrete with 4cm gauge I class brick ballast, coarse sand and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (SOR CSI No.5.01) |
| 12 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of work. (SOR CSI No. 5.06) |
| 13 | First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (SOR CSI No. 6.01) |
| 14 | Concreting of 40 mm thick RCC trench covers in mild steel frame work with RCC 1:1.5:3 in Cement, coarse sand and 2cm gauge graded hard stone ballast with 3mm thick floating coat of neat cement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (SOR CSI No. 5.18) |
| 15 | Providing M.S. Frames work, rack etc for R.C.C. Trench covers and edging with M.S. angles and M.S reinforcement including cutting, bending and welding as per approved drawing. The rate is including cost of all labour, materials etc. as required for proper completion of the work. (SOR CSI No. 9.20) |
| 16 | Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only). (SOR CSI No. 9.30) |
| 17 | Earth filling under floors and/or corporation area including cost of earth obtained with in 8 km distance outside corporation area and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (SOR CSI No. 4.10) |
| 18 | Leveling and dressing and making proper slopes including cutting and filling of earth upto a depth 100mm if so required including all labour T&P etc. required for proper completion of the work. (SOR CSI No. 4.11) |
| 19 | Part-C (Repairing & replacing of damaged fencing, Painting of fencing, gates etc.)Dismantling existing barbed wire fencing including making bundles and stacking etc. complete (labour rates only). (SOR CSI No. 9.06a) |
| 20 | Providing barbed iron wire fencing including fixing in post after straightening it including labour and T&P etc. required for proper completion of the work but excluding supply of posts and wire (labour rates only). (SOR CSI No. 9.06) |
| 21 | Providing and fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. The weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter. (SOR CSI No. 9.07) |
| 22 | S/F 50x50mm, 8 gauge G.I. chain link fencing 1.8 M high including fixing to vertical posts, horizontal runners with 10mm dia. 40mm long bolts, nuts and washers complete with all material, labour and T&P etc. required for proper completion of work. Chain link of 8 gauge shall be galvanized by hot dipped method as per relevant IS Code. (Excluding cost of vertical posts and horizontal runners) (SOR CSI No. 9.23) |
| 23 | Removing paint or varnish with paint remover or with caustic soda including supply of all materials, labour and T&P etc. required for proper completion of the work. (SOR CSI No. 13.07) |
| 24 | Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint \\"Luxol\\" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (SOR CSI No. 13.01) |
| 25 | One priming coat and one coat oil bound distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work. (SOR CSI No. 13.08) Crompton make MCCB, 250V, 40Amp, Cap.-10KA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender