Tender For Annual Maintenance Work At I.A. Ayodhya Site-2 Distt. Ayodhya
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Nov 2026
15 days left
EMD
29300
Bank guarantee accepted
Document Fee
2065
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ayodhya → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Work At I.A. Ayodhya Site-2 Distt. Ayodhya
BOQ
| Sl. No. | Item Description |
| 1 | Excavatiopn in foundation in ordinary soil (Loam clay, or sand) including filling lift upto 1.5 metre (5fts.) and lead upto 30 m.(100 fts.) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge upto a distance of 30 M. (100 fts.) from the foundation trenches. |
| 2 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 3 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.including Supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 4 | Providing and laying 50 mm thick densed gradded bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 4.50% by weight of total mix and filler, transporting the hot mix material to work site, laying with a hydrostatic paver finisher with sensor control to the required grede,level and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MORT&H specifications clauses 505 complete work in all respects. including supply of all materials,labour,T&P etc as required for proper completion of the work. |
| 5 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.including Supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 6 | Providing and laying 25mm thick bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 5.20 % percent of mix and filler ,transporting the hot mix material to work site , laying with hydrostatic paver finisher with sensor control to the required grade ,level and alignment ,rolling with smooth wheeled , vibratory and tandem roller , to achieve the desired compaction as per MORT&H.. specification clause no - 507, complete in all respect. ( Grading -I ) |
| 7 | Road Marking with Hot Applied Thermoplastic Compound with ReflectoringmGlass Beads on Bituminous Surface,Providing and laying of Hot applied thermoplastic compound 2.50mm thick including reflectoring glass beads @ 250 gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass beads as per IRC :35.The finished surface to be level uniform and free from streaks and holes. Rate AS per UPPWD. |
| 8 | M-150 Brick work in 1:6 (one cement & six coarse sand) mortar in foundation and plinth including supply of all materials, labour & tools & plants etc required for proper completion of the work. |
| 9 | 12mm thick plaster with cement and coarse sand in proportion of 1:3 over brick work. |
| 10 | M-150 Brick work in 1:4 (one cement & FOUR coarse sand) mortar in foundation and plinth including supply of all materials, labour & tools & plants etc required for proper completion of the work. Excluding GST |
| 11 | Struck pointing with cement mortar consisting of 1 part cement & 2 part fine sand of 1.25 fineness modulus, including Supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 12 | Finishing walls with water proof cement paint of required shade New work ( Two or more coats ) applied appex Ultima,Weather coat all guard asian ,berger.,P-75 ,660+661 |
| 13 | Supply Of Majdoor/Beldar/Dresser ( unskilled ) |
| 14 | JCB machine with POL and Driver Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender