Tender For Construction Of Training Hostel Building For Anm Training School, Lecture Hall And Residential Room For Hfwtc At Health And Family Welfare Training Centre C Us, Samayanallur In Madurai District
Tender Value
5.80 Crore
Estimated cost
Bid Submission
05 Nov 2026
8 days left
EMD
3 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Training Hostel Building For Anm Training School, Lecture Hall And Residential Room For Hfwtc At Health And Family Welfare Training Centre C Us, Samayanallur In Madurai District
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever nec essary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard speci fication and as directed by the departmental officers - Upto 2.40m Footing Depth. |
| 2 | Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms at the site, etc., complete complying with standard specification and as directed by the departmental officers.for Footing Depth 2.40m to 3.3m |
| 3 | Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting in clusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. |
| 4 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means |
| 5 | Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers - Mixing by mechanical means |
| 6 | Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the departmental officers. |
| 7 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 8 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 9 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 10 | Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m (expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 11 | Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 12 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical support @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) & steel pipes of 20mm dia @ required level/spacing etc. complete complying with standard specifcation and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid) |
| 13 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 14 | Foundation & basement |
| 15 | Ground Floor |
| 16 | First Floor |
| 17 | Second Floor |
| 18 | In Third floor |
| 19 | Providing and laying in position, Standardised Concrete Mix M-25 Grade with water proofing compund by insitu machine mix concrete adopting weighing batch method in accordance with IS:456 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 20 | Foundation & basement |
| 21 | Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 20mm size hard broken stone jelly for dummy columns,etc., excluding cost of centering shuttering reinforcement grills and fabrication charges but including Cost of Mortar Plasticizer, curing etc. complete and as directed by the departmental officers. (Dummy columns should be at least 1 metre height)-Mixing by mechanical means |
| 22 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers. (Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 23 | In Foundation and Basement |
| 24 | Ground Floor |
| 25 | First Floor |
| 26 | Second Floor |
| 27 | Third floor |
| 28 | Brick work in Cement Mortar 1:6 using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 29 | In Cement Mortar 1:6 |
| 30 | Ground Floor |
| 31 | First Floor |
| 32 | Second Floor |
| 33 | Third floor |
| 34 | Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 35 | In Cement Mortar 1:5 |
| 36 | Foundation & basement |
| 37 | Brick work in Cement Mortar 1:3 using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 38 | In Cement Mortar 1:3 |
| 39 | Foundation & basement |
| 40 | Brick partition walls of 10.80cm thickness using best quality Burnt Clay Brick of size 8-3/4\\" x 4-1/4\\" x 2-3/4\\" with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 41 | Ground Floor |
| 42 | First Floor |
| 43 | Second Floor |
| 44 | Brick Jelly Lime Concrete 1:2:5 (one Lime,Two Crushed Stone Sand and Five brick jelly) using 20mm brick jelly in Lime Mortar 1:2 etc., complete complying with standard specification and as directed by the departmental officers. |
| 45 | In First Floor |
| 46 | In Second floor |
| 47 | Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier.The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by thedepartmental officers etc. The rate inclusive of cost of materials and labour, etc., complete. |
| 48 | Paving the floor with best approved quality Heavy Duty Industrial Tiles like Endura or Equivalent of size 400x400x10mm thick laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 49 | Industrial Tiles like Endura or Equivalent of size 400x400x10mm |
| 50 | Provided Jet Black in colour granite slab 4'x2' 18 / 20mm thick for working table over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand(m-sand)) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification. (Vide observed Data) |
| 51 | Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 52 | Double charged vitrified tiles of size 600x600x8mm |
| 53 | Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 and above 20mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., complete complying with standard speicification and as directed by the departmental officers.(The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 54 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 55 | Self Designed colour ceramic tiles of size 305x305x6mm |
| 56 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 57 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10mm thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 58 | Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm |
| 59 | PVC Trims (Beading) |
| 60 | Single Nosing for granite slab etc., complete as per standard specification. |
| 61 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 62 | Finishing the top of roof with one course of machine pressed tiles of size 230x230x16mm to 18mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 63 | Using Pressed Tiles of 230mm x 230mm x 16 mm to 18mm |
| 64 | Supplying and fixing fine polished cuddapah slab of 20/30mm thickness for cup board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officer |
| 65 | 20 / 30mm thick |
| 66 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers |
| 67 | 110mm dia PVC Pipe for One Floor |
| 68 | 110mm dia PVC Pipe for Two Floors |
| 69 | 110mm dia PVC Pipe for Three Floors |
| 70 | Manufacturing, Supplying and fixing of stainless steel Hand rails for staircase using 50mm dia 304L Grade Stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc., complete. |
| 71 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers |
| 72 | Stainless Steel (Salem Stainless Steel) Door Frame - Box Section using Stainless Steel Plate with 1mm thickness with the size of 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc including dismantling,making necessary chipping and holes in RCC columns, walls with power drills to the extent required, including providing concrete 1:2:4 inside the box curing etc complete complying with standard specification and as directed by the departmental officers - SS Door Frame with thickness of 1mm/1.60mm. |
| 73 | Supplying and fixing solid core flush shutter of following type with thickness with necessary T.W. internal lipping alround confirming to IS 2202 1(1999) including cost of wind appliances and furniture fittings such as 3 Nos SS 304 Grade Butt Hinges of size (125mm x 30mm) , 2 Nos .300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 No. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Single leaf |
| 74 | Solid Core Flush Shutters with Teak ply on both side with teakwook lipping allround 35mm thick - Single leaf |
| 75 | Supplying and fixing solid core flush shutter of following type with thickness with necessary T.W. internal lipping alround confirming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 6 Nos of SS 304 Grade Butt Hinges of size (125mm x 30mm) , 3 No. 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 No. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Double leaf. |
| 76 | Solid Core Flush Shutters with Teak ply on both side with teakwook lipping allround 35mm thick - Double leaf. |
| 77 | Manufacturing supplying and fixing of Fully Panelled steel door with the following specification Manufacturing supplying and fixing of Fully Panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. |
| 78 | One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter to conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. - Single leaf of size 1.00m x 2.10m. |
| 79 | Single Leaf 1.00x2.10m (Fully panneled) |
| 80 | Fabricating, Supplying and fixing in position of steel sheeted windows ( Three Leaves) with the following specifications. Outer frames of windows made of ‘Z’ section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion ‘J’ section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 No. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position fiRmly. 2 numbers of Steel Offset Pivot hinges of size 3” and one number of handle-Cu.m latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation. |
| 81 | a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adjustable stay made out of 18 x 5mm at 0.70 kg/ m MS flat of length 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 No. of hold fasts of 200mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18x5mm at 0.70kg/m, welded to the shutter at two place equivalent from each from top and bottom of the shutter. An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers. All sections should be in confiRmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete complying with standard specification and as directed by the departmental officers. |
| 82 | Three Leaves |
| 83 | Fabricating, Supplying and fixing in position of steel sheeted windows ( Two Leaves) with the following specifications. Outer frames of windows made of ‘Z’ section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion ‘J’ section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 No. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position fiRmly. 2 numbers of Steel Offset Pivot hinges of size 3” and one number of handle-Cu.m latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation. |
| 84 | a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adjustable stay made out of 18 x 5mm at 0.70 kg/ m MS flat of length 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 No. of hold fasts of 200mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18x5mm at 0.70kg/m, welded to the shutter at two place equivalent from each from top and bottom of the shutter. An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers. All sections should be in confiRmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete complying with standard specification and as directed by the departmental officers. |
| 85 | Two Leaves |
| 86 | Supply & fixing of WPC door shutter, extruded asa single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/Cub.Mt. & shore hardness of 55. The door shall be a plain matt board as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the Aluminium “G” type channel with Wheel and the door shall have 2Hooks in SS, 2 Handles 4” in SS etc., complete and as directed by the departmental officers |
| 87 | UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 88 | Fabricating, Supplying and fixing in position Mosquito net arrangements of Openable type. The Outer frame shall be made with Powder coated Aluminium Natural colour matt finishAluminium Hollow section of size 31mmx40mmx1.55mm. The Vertical center Mullion made with Aluminium Hollow section of size 55mmx11mmx1.55mm.The Horizontal and Vertical Aluminium Hollow section Shutter frame of size 31mmx13mm with a thickness of 1.55mm. The Mid Horizontal Aluminium Hollow section frame provided in the shutter with a size of 10mmx11mmx1.55mm. The Epoxy coated Stainless Steel 304 grade wire mesh with dia of 0.19mm shall be provided for Net. The U shaped Aluminium handle provided in the each shutter with a size of 19mmx26mm. The Connection Mechanism between Shutter and Outer frame that enables opening the Mosquito net. |
| 89 | The Mosquito net arrangement should be fixed to the window with 100% packing with Screws, Silicon packing all around the frames with including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column/wall, masonry walls, Window frames, wherever necessary with drills to the required extent and make good to the original conditions after fixing and also as directed. All the Aluminium sections are to the powder coated with matt finish under electrically controlled conditions in accordance with relevant IS Code etc.complete complying with standard specification and as directed by the departmental officers. |
| 90 | UPVC Ventilator Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 91 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un- plasticized polyvinyl chloride (uPVC) sections.Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 92 | Supplying, fabricating, erecting and fixing CalciumSilicate Board False Ceiling upto a ceiling height of 4.5m from floor level Using Calcium Silicate Board Plain Sheets (10mm thick) etc., complete complying with standard specification and as directed by the departmental officers. |
| 93 | Providing and fixing Acoustic Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge.Installation: Install aluminium box section (provided by others) of section 50mm x 25mm or as approved by the Engineer-in-Charge on the solid wall horizontally using screws and plugs at spacing of 600mm centre to centre. Screw the aluminium extruded keel for channelled wood works provided by Armstrong over the lowest and second aluminium section at an on centre distance of 600mm. Place the inside clip on the groove end of the panel along the aluminium keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation Team and installation should be carried out as per Armstrong Recommended Procedure. |
| 94 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers |
| 95 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 96 | Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including mortar plasticizer at 200ml per 50Kg of cement used, finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers |
| 97 | Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including mortar plasticizer at 200ml per 50Kg of cement used, finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 98 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 99 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 100 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed plastic interior Emulsion paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 101 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface etc., complete complying with standard specification and as directed by the departmental officers. |
| 102 | Supplying and applying Putty with two coats of plastered wall surface of first class quality and of approved including thorough scrapping, clean removal of dirt wherever required etc., complete complying with standard specification. |
| 103 | Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work. |
| 104 | Pre-Construction anti-termite treatmentplinth area – surface treatmentstage-1 :- Completion of earth work for column footings before laying plain cement concrete 25mm dia Hole spaced at 30cm center to center on both direction will be made at the bottom of earth workand the chemical will be poured in the holes and will be sprayed in the four sides of earth work at the rate of 3 litres of chemical solution (Chlorophyrifos emulsion diluted in ration 1:19 (One emulsion and 19 water ) per square metre payment shall be made after completion of 3 stages. |
| 105 | stage-II :- After filling the basement before laying flooring concrete with filling Crushed stone sand(M-Sand) 25mm dia holes to adepth of 450mm will be made inside the basement and the chemical will be poured in the holes at the rate of 3 litres of chemical solution (Chlorophyrifos emulsion diluted in ration 1:19 (One emulsion and 19 water ) per square metre payment shall be made after completion of 3 stages. |
| 106 | Peripheral treatmentstage-III.On completion of building and leveling the outer area adjacent to the walls column ground ponds of size (900X300 mm will be filled in the ponds at the rate of 3 litre of chemical solution per Rm payment shall be made after completion of 3 stages.Stage-IV.Spraying termite solution around the building (Out side of the building) by making crowbar holes around the building before laying the plinth protection. This holes has to be closed after the treatment |
| 107 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by Mechanical means |
| 108 | For Foundation & Basement |
| 109 | Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Enginer before use on works) (SD-660) |
| 110 | White glazed European Water Closet with 10 litre capacity PVC flushing tank fixed to wall |
| 111 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sandcushion and foRming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 112 | Supplying and fixing in position best quality cuddapah sink of following sizes including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] |
| 113 | Cuddapah sink of 600 x 600 x 200mm |
| 114 | Supplying and fixing in position best quality approved make Stainless steel sink of size of 600 x 600 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] - For Fixing the Sink without CI brackets |
| 115 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 116 | White Glazed Wash Hand Basin Without Pedestal |
| 117 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 5.5mm thick mirror of following size , Shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) Size :600 x 450 mm / 500 x 400mm / 1000 x 780 mm. |
| 118 | Mirror of size 600x450mm |
| 119 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 120 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 121 | Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as di rected by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 122 | Supplying and fixing best approved best quality Stainles steel Health Facet with Stop cock of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The Stainles steel Health Facet should be got approved by Executive Engineer before use on works). |
| 123 | Supplying, laying and jointing CPVC pipes of Standard Dimension Ratio-11 (Pressure class 1) conforming to IS:15778 - 2007 of approved quality and best variety of the following dia including cutting and fixing CPVC specials using CPVC adhesives (Solvent Cement) (but excluding cost of such specials) and fixing into wall with teak wood plugs, |
| 124 | CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications and as directed by the departmental officers. (The CPVC pipes shall be got approved by Executive Engineer before use on works). - External water supply above ground level / Below ground level. |
| 125 | External water supply - Below Ground Level |
| 126 | 32mm dia |
| 127 | External water supply - Above Ground Level |
| 128 | 25mm dia |
| 129 | 32mm dia |
| 130 | Supplying, laying and jointing CPVC pipes of Standard Dimension Ratio 11 (Pressure class 1) conforming to IS:15778 - 2007 of approved quality and best variety of the following dia including cutting and fixing CPVC specials using CPVC adhesives (Solvent Cement) (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications and as directed by the departmental officers. (The CPVC pipes shall be got approved by Executive Engineer before use on works) - Internal water supply above ground level. |
| 131 | 20mm dia |
| 132 | Supplying CPVC Specials of SDR 11 conforming to IS 17546-2021 in water supply ar rangements (both in internal and external water supply arrangements |
| 133 | 20mmdia CPVC elbow |
| 134 | 25mmdia CPVC elbow |
| 135 | 32 mmdia CPVC elbow |
| 136 | 20 mmdia CPVC Coupler |
| 137 | 25 mmdia CPVC Coupler |
| 138 | 32 mmdia CPVC Coupler |
| 139 | 20 mm dia CPVC tee |
| 140 | 25mm dia CPVC tee |
| 141 | 32 mm dia CPVC tee |
| 142 | 20mmx15mm dia CPVC reducer elbow |
| 143 | 25x20mm dia CPVC Reducer elbow |
| 144 | 32x25mm dia CPVC Reducer elbow |
| 145 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 146 | Gate Valve |
| 147 | 32mm dia |
| 148 | 25mm dia |
| 149 | 20mm dia |
| 150 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 151 | 75mm dia |
| 152 | 110mm dia |
| 153 | 160mm dia |
| 154 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confiRming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 155 | PVC Elbow |
| 156 | 75mm dia |
| 157 | 110mm dia |
| 158 | 160mm dia |
| 159 | PVC Elbow with Door |
| 160 | 75mm dia |
| 161 | 110mm dia |
| 162 | PVC Tee |
| 163 | 75mm dia |
| 164 | 110mm dia |
| 165 | PVC Bend |
| 166 | 75mm dia |
| 167 | 110mm dia |
| 168 | PVC \\"Y\\" with Single Door |
| 169 | 75mm dia |
| 170 | 110mm dia |
| 171 | PVC \\"Y\\" with Double Door |
| 172 | 75mm dia |
| 173 | 110mm dia |
| 174 | Supplying and fixing in position PVC cowls of following dia of best approved quality confoRming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works) |
| 175 | 110mm dia |
| 176 | 75mm dia |
| 177 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 178 | SD tap |
| 179 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers. |
| 180 | 50mm thick slab (using 20mm HBGS Jelly) |
| 181 | 75mm thick slab (using 20mm HBGS Jelly) |
| 182 | Manufacturing, supplying and fixing in position plain cement concrete precast pavement slab of size 450mm x 450mm of 50mm thick in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed by the departmental officers |
| 183 | Supplying and fixing position PVC Nahani Trap / Floor Trap of the following sizes with best PVC gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 184 | PVC Nahani Trap of size 100 x 75mm with pvc gratings |
| 185 | Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers |
| 186 | Supplying, laying and jointing glazed stoneware pipes of following dia of approved best quality with spigot and socket ends (in reverse direction) in dry condition and laid in loose joints (i.e.) without cement and spun yarn, so that the waste water can be drained to the trenches already available, excluding cost of earth work excavation, cost of re-filling with crushed stone sand/ earth, but including laying the pipe in true alignment and gradient and conducting required water supply test for draining with necessary tools and plants, etc., complete complying with standard specifications.(Earth work excavation, re-filling with excavated earth will be measured and paid separately). |
| 187 | 100mm dia |
| 188 | Supplying and filling ISS metal of 40mm size in dispersion trench including stacking for pre measurements around the stoneware pipe or in the leach pit or soak pit to the required thickness as directed by the departmental officers etc.,complete complying with standard specifications. |
| 189 | Supplying and filling ISS metal of 20 mm size in dispersion trench including stacking for pre measurements around the stoneware pipe or in the leach pit or soak pit to the required thickness as directed by the departmental officers etc.,complete complying with standard specifications. |
| 190 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and without consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 191 | Supplying and fixing of RCC well Ring of followingthickness of size 1.2x.075x.30m in RCC 1.2.4 using 20mm HBGS jelly including cost of Reinforcement steel in position but including cost of moulding charges ,casting of slab,finishing, curing and fixing in position in all floor etc complete complying with standard specifications. |
| 192 | Drilling of 6\\" (150mm) dia vertical borewell to the required depth as directed by the departmental officers in all soils such as hard rock strata including all incidental charges for drilling machineries transportation for rig machineries and supporting vehicle to work spot,charges to fuel required for operation, labour charges for driling bore well to the required depth according to water table as directed by the departmental officers inculding clearing the site after completion of work complying with standard specification. |
| 193 | 0-150m |
| 194 | 151m - 180m |
| 195 | 181m - 210m |
| 196 | 211m - 240m |
| 197 | 241m - 270m |
| 198 | Supplying and inserting PVC casing pipe 160mm dia for borewell to withstand the vertical pressure of 6Kg/cm2 without slot including with coupling wherever necessary including cost of cutting and threading and transporting the pipe to work and as directed by the departmental officers etc., including labour charges etc.,complete complying with standard specification. |
| 199 | Supplying laying and jointing CPVC pipes class - V-1MP a with working pressure of 10 kg./cm2 of approved quality and best quality conforming to ISS and with ISI mark of following sizes including cutting threading and fixing CPVC specials but including cost of such specials and fixing into Bore well for suction line, air pipe etc., complete complying with standard specification. 32mm dia CPVC pipe |
| 200 | Supplying and fixing of suitable PVC End cap (With working pressure 6 kg/sq cm)for 6\\" dia bore well of best quality with ISI mark. The PVC End Cap should be got approved by departmental officers before use on works.- 160mm dia |
| 201 | Supplying and fixing 5 HP Submersible pump set of standard and approved brand with suction and delivery including one number of foot value with accessories to suit the pump set, starter and cast iron bolt & nuts of fixing the wall or any other masonry including dismantling and making good of the dismantled portion to the original condition etc. and testing complete. |
| 202 | Supply and fixing of Nylon rope for borewell and as directed by the departmental officers. |
| 203 | Supply of 4.00 sqmm three core flat copper cable with wire bounded punched copper conductor insulated and sheeted with PVC.for submersible pump motor with voltage grade upto 1100V confirming to and marked with IS (694-1990) complying with standard specification etc.complete. |
| 204 | Supplying and Fixing of 3 Phase Panel Board including labour charges with fiully automatic starter phase preventer, On and Off Switch Indicator Lamp, Volt Meter and Ammeter with Switch with Suitable Power Capacity arranged in a box as directed by the departmental Officers etc.,Complete. |
| 205 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY /FIRST / EQUIVALENT |
| 206 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 207 | Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers |
| 208 | Supplying and fixing in position of P.V.C water storage tank of best approved quality and brand of super thick with the capacity of 2000 Litres with accessories including giving necessory connections etc., complete as directed by the departmental officers. ( The P.V.C. water storage tank should be got approved by the Executiove Engineer before use on works.) |
| 209 | Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. |
| 210 | (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. |
| 211 | 500 Litres |
| 212 | Supplying and Fixing of 1.00 HP Mono block motor including all accessories as directed by the departmental officers etc complete |
| 213 | Supplying and laying of TAMIN Paver Block of 80mm thick, the cost include Base cushion of 3cm depth transporting charges etc, complete complying with the standard specification and as directed by the departmental officers |
| 214 | Supplying and fixing of Cut Stone Fully Dressed to size on all faces etc., complete complying with the standard specification and as directed by the departmental officers |
| 215 | Providing & Fixing of Premium quality Vertical blinds of approved material, colur and shade including all necessary fixtures, labour, etc., complete as per standard drawing and direction of Engineer incharge. |
| 216 | Painting the wall with Texture Finish Paint including labour charges etc., complete complying with the standard specification and as directed by the departmental officers |
| 217 | Supplying and fixing of 15\\" size Emblem etc., complete complying with the standard specification and as directed by the departmental officers. |
| 218 | Supplying & fixing Sign and PVC Name boards with following specification. The board is made of PVC acrylic sheet of 3mm thick over which colour film is to be glued and cutout for the required letter as directed by the department Officers etc complete. The rate includes cost of all materials and labour charges for manufacturing and fixing the boards in position etc complete. |
| 219 | Supplying and fixing of 50mm dia G.I. Pipe B class etc. complete complying with the standard specification and as directed by the departmental officers |
| 220 | Supplying and fixing steel clothline wire. The shape, colour, shade and size should be as per design and as instructed by the departmental officers concerned. The rate includes cost of all materials, fabrication, welding, polishing, transports and other incidental charges, including fixing in position and excluding GST etc complete |
| 221 | Supplying,fixing and roofing with colour Galvalume sheet of 0.47mm thick with accessories such as ‘J’ / ‘V’ bolts and nuts of suitable length with bitumen washers complete complying with standard specification and as directed by the departmetal officers |
| 222 | Supplying and Fixing of Aluminium Diecast Letters of approved size and colour. The colour treatment process is achieved with colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes |
| 223 | Aluminium Diecast Letters 9'' size |
| 224 | Aluminium Diecast Letters 6'' size |
| 225 | Providing and fixing factory-made, heavy-duty galvanized steel main entrance door with steel frame and reinforced shutter, having approved wood-grain finish by factory powder coating/approved wood-grain transfer process, complete with corrosion-resistant pretreatment, suitable internal infill, heavy-duty stainless-steel hinges, approved mortise/multipoint locking system, stainless-steel handles, EPDM weather seals, necessary fasteners, holdfasts, fixing, grouting, sealing, alignment and all other accessories, complete as per approved drawings, manufacturer's specifications and instructions of the departmental engineer. |
| 226 | Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25+ 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer. |
| 227 | Providing Structural Glazing System with open groove Joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept., Officials.) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composote panel, openable, window panels on a continuius framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the saystem both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere |
| 228 | Manufacturing and supplying Steel Cot of size 78\\"x36\\". The head rest and leg rest portions of cot shall be made of 18 gauge 1\\" round CR tube. The bed area is made up of 1mm thick (18gauge)CRCA Sheet which is profile folded at all the edges.2 Nos of extra length wise stiffener made up of 1mm thick (18 gauge)CRCA sheet is added beneath the area for extra strength and stability. Mattress hold panels to the side of the beds shall be provided with 12mm thick prelaminated particle board (ISI &ISO Certified ) All metal surfaces are finished with 60 microns powder coating. The rate including cost of all materials, Conveyance, labour and fixing in position at worksite etc., complete as directed by the departmental officers. |
| 229 | Supplying, assembling and placing in position of Single size cot for , size of the cot being 1.80mx 0.90m with Head board reaching upto 0.90m height. Head board and leg board made out of first quality African Teak wood planks with carving and cot cleat is made up of teak wood planks/reapers befit. All exposed surfaces of the wood be treated with sealer and be polished with Melamine Matt Finish. The rate includes cost of all materials, labour, polish,loading and unloading charges. |
| 230 | Manufacturing and supplying Steel framed prelaminated particle board table with drawer of size 2'9\\"x1'9\\". The table leg and top support frame shall be made with 18 gauge 1\\"x1\\" round CR tube. The table top shall be provided with18 mm thick both side prelaminated particle board (ISI&ISO Certified). The drawer shall be provided with 12 mm and 8mm thick both side prelaminated particle board at sides and bottom respectively. The drawer shall be provided with pad locking arrangement .All cutting edges shall be finished with premium pvc edge banding.All metal surfaces are finished with 60 microns powder coating.The frame is fixed with superior PVC bush. The rate including cost of all materials, Conveyance, labour and fixing in position at worksite etc., complete as directed by the departmental officers. |
| 231 | Manufacturing and Supplying of Steel study Chair with arm steel frame and leg chair 18 gauge CR round pipe legs with slotted steel seat.The rate includes labour for manufacturing, supply, transportation, etc.,,The materials to be used shall be got approved by the Executive Engineer concerned before use on work,etc., complete as per standard specification. |
| 232 | Supply of Writing Pad Chair with the following Specifications. The frames are made of 1\\" round 18 gauge CRCA tubes, Seat & backrest are provided with 18 gauge CRCA perfo sheets. The box type book shelf is provided with18 gauge CRCA Perfo sheets fitted with one side on the chair. The chair is Coated with 70 micron thick powder coated with seven tank cleaning process. The writing pad is provided with 19mm hardwoods ply with 0.8mm laminated sheet. The writing pad edges are to be covered with 2mm PVC banding. Bushes are to be fixed at wherever nessesary. The rate is inclusive of cost of materials, fabrication, transports, providing in position and all other incidental charges and as directed by departmental officers. |
| 233 | Supply of Wooden junior executive table (Special type) of size: 60\\" x 36\\" x 30\\" (TWTBL 009): Made out of 18 mm commercial plywood and 1 mm laminated finish with drawer and cupboard on one side and 4 closed drawer on other side with keyboard arrangements. |
| 234 | Supply of Wooden conference chair with arm (TWCHR 008): Made out of good quality teakwood, 2” rubber cushion for seat, 40 density moulded rest covered with upholster /rexine of good polish finish. |
| 235 | Manufacturing, supplying and fixing S Type Chair of size 450x500x900mm. The chair frame made of 1.5\\" 22 gauge powder coated M.S pipe knitted with nylon for seat and back rest. Countrywood handles shall be provided. Necessary pushes shall be fixed. The rate inclusive of cost of all materials, welding charges, bending charges, labour charges, transportation as applicable and supply to worksite. as directed by the departmental officers. |
| 236 | Supply of best Quality PU Foam Mattress with PU Foam, covered with 300 GSM fabric with zipper provision of Size 1.80m x 0.85m x 0.10m. The rate includes cost of all labour, loading and unloading charges |
| 237 | Supplying and commissioning of Steam Generator (Compact model), the outer jacket is made of 6 mm & 8 mm thick MS plates. Inner shell by 2 mm thick AISI 304 Grade S.S. sheet and inner bottom plate by 4 mm AISI 304 Grade S.S. sheet Steam Generator having a size of 18\\"x18\\"x36\\" operated by gas. Specialist equipment is installed to economies gas consumption. It is fitted with automatic float valve assembly, safety valve, pressure gauge meter, water level indicator and drainage valve. It is mounted on MS Stand. |
| 238 | Supplying and commissioning of Rice Cooking & Multi Purpose Vessel - it is fabricated by 304 grade 2B finish stainless sheet. The vessel and the perforated plate is made of 2 mm thick S.S. sheet. The perforated plate is kept at a distance of 100mm from the bottom plate for the effective filtration of \\" KANJI\\". 1\\" drainage nozzle is fitted plate with ball valve for draining the \\"KANJI\\". The vessel lid is made of 1mm thick 304 Grade 2B finishes thickness stainless steel sheet. Vessel sides are supported by 65 mm dia S.S. Rod with steam inlet connection. Tilting handle pipe of 28 mm dia S.S. Pipe provided with locking arrangement. It is fitted with steam inlet 33 mm dia pipe including cost of all materials, conveyance and labour etc., (Size :- 22\\" dia x 22\\" H, 20KG ) |
| 239 | Supplying and commissioning of Idly Cooking Plant of capacity 120 Nos. of size 48\\"Lx30\\"Bx24\\"H. The Cap and it's sides shall be fabricated by 304 grade SS Sheet. The outer chamber and idly trays are made of 1.25 mm thick and the inner chamber with 1.6 mm thick 304 grade SS Sheet. It is fitted with all accessories viz., Automatic steam control system. This equipments has two independent chambers. Each chamber contains four numbers of idly trays with idly stand. One tray contains 15 numbers of iddlies. The rate includes cost of all materials, Conveyance, labour and fixed in position to worksite etc., complete as directed by the departmental officers. |
| 240 | Supplying and commissioning of Double Burner Gas Range of Size 48\\"L X 24\\" B X 24\\"H. The frame work made of 35 x 5 mm MS'L angle with panelling by SS Sheet.Legs are made of 40 mm S.S round pipe with leg bush. It is fitted with necessary gas fittings of H.P.Gas Burner, N.C.valve, copper tube and pan support gas pipe.The rate includes cost of all materials, Conveyance, labour and fixed in position to worksite etc., complete as directed by the departmental officers (Size:- 48\\"L X 24\\" B X 24\\"H) |
| 241 | Supplying and commissioning of Dosai Tawa of Size 60\\"L X 30\\"B X 34\\"H, made of 20 mm MS Plate. Frame work shall be made of 35 x 5 mm MS'L angle with panelling by SS Sheet, On top 3 side panelling By SS splash back and Legs shall be of 50 mm SS round pipe. It is fitted with necessary gas fittings 'V' burner , Normally Closed Valve , Copper tube, Heat resisitng pas, gas pipe etc., The rate includes cost of all materials, Conveyance, labour and fixed in position to worksite etc., complete as directed by the departmental officers(Size:- 60\\"L X 30\\"B X 34\\"H) |
| 242 | Supplying and commissioning of Wet Grinder of capacity 10 litre. The Grinder made of SS body with gear type model & I/III. Phase motor with electrical arrangement. The rate includes cost of all materials, Conveyance, labour and fixed in position to worksite etc., complete as directed by the departmental officers (10 litre capacity) |
| 243 | Supplying and Commissioning of DOSA BATTER TABLE WITH 2 CONTAINERS of size 44”Lx24”Bx 34”H.The table top and middle shelf are fabricated with 18 gauge 304 grade Stainless Steel Sheets and mounted on SS tubular legs with nylon bullet feet. The table is provided with 2 nos. of SS Containers for storing Batter. The rate includes cost of all materials, Conveyance and fixed in position to worksite etc., complete as directed by the departmental officers. |
| 244 | Supplying and Commissioning of IDLY BATTER TABLE WITH 1 CONTAINER: Size: 36”x24”x34\\" The table top is fabricated with 18 gauge 304 grade Stainless Steel Sheets and mounted on SS tubular legs with nylon bullet feet. The table is provided with 1 no. of SS Container of big size for storing Batter. The rate includes cost of all materials, Conveyance and fixed in position to worksite etc., complete as directed by the departmental officers. |
| 245 | Supplying and Commissioning of WORK BENCH: Size: 60”x24”x18”h. The base frame under the SS top is made of sturdy MS Angles and Bench top is made of 16 gauge 304 grade SS Sheet and mounted on SS Tubular legs with nylon bullet feet.The rate includes cost of all materials, Conveyance and fixed in position to worksite etc., complete as directed by the departmental officers. |
| 246 | Supplying and Commissioning of SS STORAGE RACK: 4 Tier Size – 44”x18”x66”h. The rack is made of 18 gauge 304 grade SS Sheet and mounted on SS tubular legs with nylon bullet feet.The rate includes cost of all materials, Conveyance and fixed in position to worksite etc., complete as directed by the departmental officers. |
| 247 | Supplying and Commissioning of DEEP FREEZER: Size: 46\\"Lx 26”Bx 34”H. The inner and outer shell of freezer is made of fibre board. The rate includes cost of all materials, Conveyance, labours and fixed in position to worksite etc., complete as directed by the departmental officers. |
| 248 | Manufacturing and supplying of SS PLATE RACK – 100 Plates Capacity of size 1500 x 375 x1500mm having 4 Tiers. The rack is made of 1” Square 304 grade SS tubes and 5 mm 304 grade SS rods. It is also provided with quality castor wheels for easy mobility. The rate includes cost of all materials, Conveyance, labours and fixed in position to worksite etc., complete as directed by the departmental officers. |
| 249 | Supplying,fabricating and fixing in position of stainless steel scrub up sink of size 2.10mx 0.45mx0.75m with following specifications the outer frame of fixing shall be made of 32mmx 32mm size square rod MS tube section a curved trough with 38cm depth made of stainless steel sheet of 1.60mm thick. A waste coupling with drain arrangements shall be fixed to the trough. The rate includes cost of all materials, Conveyance,labours and fixed in position to worksite etc., complete as directed by the departmental officers. |
| 250 | Supplying and Laying of L.P.G Gas pipe line of 22mm OD 0.90mm Thick Copper Pipe to the burner with butterfly make and fittings. The pipe line should be tested as directed by the departmental officer to Ensure safety and effective functioning of all Equipments. The rate including cost of all materials, Conveyance , labour and Laying in position to worksite etc., complete as directed by the departmental officers. |
| 251 | Supplying and laying the Steam pipe line of 32mm MS \\"C‟ Class Heavy Duty pipe from steam generator to vessel covered with asphalts rope heat exhausts with SS valve and MS union arrangements. The pipe line should be tested as directed by the departmental officers to Ensure safety and effective functioning of all Equipments. The rate including cost of all materials, Conveyance , labour and Laying in position to worksite etc., complete as directed by the departmental officers. |
| 252 | Manufacturing and supplying of 4 seater Dinning table of size 1.20x0.85x0.75m with sliding seat arrangement (full SS). The Table shall be attached with seater by SS frame of 32 mm square tube of 304 Grade and the Table top shall be provided with 1.25 mm SS 304 Grade Sheet. Legs of 40 mm SS 304 Grade round pipe and cross pipe 32 mm round pipe shall be provided for Table frame work. Seater shall be provided with SS readymade plate of 304 grade. the rates are inclusives of loading, unloading, transportaions, etc., Complete complying with standard specifications., ( 4 Seated ) (1.20x0.90x0.75m) |
| 253 | Supplying of Water Jug of 2 Ltrs capacity made of Stainless Steel metal. |
| 254 | Supplying of 3” Dia Stainless steel Karandi |
| 255 | Supplying of 2” Dia Stainless steel Jalli Karandi |
| 256 | Supplying of 5” Dia Stainless steel Rice Karandi |
| 257 | Supplying of 4” Dia Stainless steel Dosa Karandi |
| 258 | Supplying of 15” Dia Stainless steel Kadai |
| 259 | Supplying of Stainless steel Tea Can of 15 Ltrs capacity |
| 260 | Supplying and commissioning of Industrial Heavy Mixi motor with cocount scrapper 2 - litre with necessary electrical arrangements.The rate including cost of materials, Conveyance and Supply to worksite etc., complete as directed by the departmental officers. |
| 261 | Supplying and Fixing of SS GRATES FOR DRAIN: Size: 30” L x 9” W .The grate is made of ¾” square 304 grade SS tubes with gap of ¾” between each pipe. The width of the grate is 9”.The rate including cost of materials, Conveyance and fixed in position to worksite etc., complete as directed by the departmental officers. |
| 262 | Manufacturing and supplying SS WASTE FOOD BOX TROLLEY: Size: 24”x24”x 32”. The outer shell shall be made of 18 gauge304 grade SS Sheets and mounted on 304 grade 16-gauge SS tubular legs with quality castor wheels. The inner shell shall be designed with Plastic Top for easy clearing of waste. The rate includes cost of all materials, Conveyance and supply to worksite etc., complete as directed by the departmental officers. |
| 263 | Supplying and commissioning of Sambar / Rasam vessel of size 19\\"dia X 19\\" H, 75- Liters. The inner vessel is fabricated by 304 grade 2B finish 2 mm thickness stainless steel sheet. The inner bottom dish portion is kept at a distance of 100 mm bottom plate for the effective functioning. The outer vessel is made of 1.6 mm thick and the vessel sides are suppported by 65 mm dia stainless steel rod with steam inlet connection. Tilting type handle of 32 mm dia 2mm thickness stainless steel pipe shall be provided with locking arrangement. The vessel is filted with thermo dynamic steam trap valve, Safety valve, steam inlet & outlet connected with end fittings. It is tested by Hydraulic steam pressure rating 05.Kg/cm2. The rate inclusive of cost for Accessories legs for vessels- 5 Nos., cost of all materials, Conveyance, labour and fixed in position to worksite etc., complete as directed by the departmental officers. (Size :- 19\\"dia X 19\\" H, 75- Liters) |
| 264 | Supplying and commissioning Dough kneading Machine of capacity 10 KG with 2 H.P motor . The outlet body frame work shall be made of 1 1/4\\" x 1 1/4\\" x 1/4\\" MS L angle and panelling by MS with powder coated bowl fabricating by 1.5 mm SS 304 grade sheet arm by 65 mm SS rod fitted with rectangle tube strain. The rate including cost of all materials, 2 H.P motor, Conveyance, labour and fixed in position to worksite etc., complete as directed by the departmental officers. (10 KG, 2 - HP) |
| 265 | Supplying and fixing the High pressure regulator for Boilers and Gas pipe lines. The regulator should be tested as directed by the departmental officer to Ensure safety and effective functioning of all Equipments. The rate including cost of all materials, Conveyance, labour and fixing in position at worksite etc., complete as directed by the departmental officers. |
| 266 | Supplying and fixing of Brass Shutt off valve of dia.20mm for Gas pipe line. The valve should be tested as directed by the departmental officer to Ensure safety and effective functioning of all Equipments. The rate including cost of all materials, Conveyance, labour and fixing in position at worksite etc., complete as directed by the departmental officers. |
| 267 | Supplying and fixing Brass adopter of dia.20mm for Gas pipe line. The adopter should be tested as directed by the departmental officer to Ensure safety and effective functioning of all Equipments. The rate including cost of all materials, Conveyance, labour and fixing in position at worksite etc., complete as directed by the departmental officers. |
| 268 | Supplying and fixing of Burner fit tile copper pipe of dia. 15mm and length 4\\" for Gas pipe line arrangements. the union should be tested as directed by the departmental officer to Ensure safety and effective functioning of all Equipments. The rate including cost of all materials, Conveyance, labour and fixing in position at worksite etc., complete as directed by the departmental officers. |
| 269 | Supplying and fixing of fire proof Flexible tube (Heavy) of dia. 15mm for Gas pipe line arrangement. The tube shall be made of Rubber material over aluminium cloth. The material should be tested as directed by the departmental officer to Ensure safety and effective functioning of all Equipments. The rate including cost of all materials, Conveyance, labour and fixing in position at worksite etc., complete as directed by the departmental officers. |
| 270 | Supplying and fixing of Stainless Steel Needle Valve of dia.20 mm with suitable arrangements for Gas pipe line. The material should be tested as directed by the departmental officer to Ensure safety and effective functioning of all Equipments. The rate including cost of all materials, Conveyance, labour and fixing in position at worksite etc., complete as directed by the departmental officers. |
| 271 | Manifold arrangements of 1 banks x 5 cylinder each wing , outlet pressure gauge, brass heavy duty regulator 5 Nos. with suitable adopter, flexible Hose. Mainfold shall be of a construction and of a designs and material suitable for the service pressure as per requirements. The rate includes cost of all materials,transports and other incidental charges, including fixing in position and excluding GST etc complete. |
| 272 | Supplying and erecting Convertable,Digital inverter frost free double door Refrigerator as per requirements. The rate includes cost of all materials,transports and other incidental charges, including fixing in position and excluding GST etc complete. |
| 273 | Supply of Wall Mount Chimney model of CNY bolt FL SW SC BK 0.90m 1500 m3/hr 90cm as per requirements. The rate includes cost of all materials,transports and other incidental charges, including fixing in position and excluding GST etc complete. |
| 274 | Construction of INSPECTION CHAMBER 0.60 m x 0.60 m clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Clay burnt Bricks of size 8-3/4” x 4-1/4” x 2-3/4” with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. |
| 275 | Manufacturing, supplying and fixing in position of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed by the departmental officers |
| 276 | Providing Single Nosing for Cudappah slab |
| 277 | GST 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender